Panasonic KX-FL403UA Service Manual ▷ View online
7.
Remove the used cartridge (
) from the drum unit (
).
•
•
•
•
The toner may stick to the cartridge and the drum unit. Be
careful when handling.
careful when handling.
•
•
•
•
Do not drop the toner on the brown drum surface (
).
•
•
•
•
Put the used toner cartridge into the protection bag.
8.
Insert the cleaner (
) fully into the groove (
) of the drum unit and
move it from side to side at least 3 times to clean the inside of the
drum unit.
drum unit.
•
•
•
•
Repeat for the other groove.
Note:
•
•
•
•
Be sure to clean all the way to the edge of each groove.
9.
If you replace the drum unit at the same time, remove the new drum
unit from the protection bag.
Place the new toner cartridge ( ) into the drum unit ( ) vertically.
unit from the protection bag.
Place the new toner cartridge ( ) into the drum unit ( ) vertically.
10.
Firmly press down the toner cartridge to snap into position.
25
KX-FL403UA
11.
Turn the two levers (
) on the toner cartridge firmly.
12.
Make sure that the triangles (
) match, to install the toner cartridge
correctly.
•
•
•
•
If the lower glass ( ) is dirty, clean it with a soft dry cloth.
13.
Install the drum and toner unit (
) by holding the tabs.
•
•
•
•
Make sure that the triangles(
) match to install the drum and
toner unit correctly.
26
KX-FL403UA
14.
Close the front cover (
) by pushing down on both sides, until
locked.
15.
Place the handset on the credle and attach the document stacker.
•
•
•
•
While the unit displays “PLEASE WAIT”, do not open the front
cover, or disconnect the power cord.
cover, or disconnect the power cord.
Waste disposal method
Waste material should be disposed of under conditions which meet
all national and local environment regulations.
all national and local environment regulations.
27
KX-FL403UA
4 MAINTENANCE
4.1. MAINTENANCE ITEMS AND COMPONENT LOCATIONS
4.1.1. OUTLINE
MAINTENANCE AND REPAIRS ARE PERFORMED USING THE FOLLOWING STEPS.
1. Periodic maintenance
Inspect the equipment periodically and if necessary, clean any contaminated parts.
2. Check for breakdowns
Look for problems and consider how they arose.
If the equipment can be still used, perform copying, self testing or communication testing.
3. Check equipment
Perform copying, self testing and communication testing to determine if the problem originates from the transmitter, receiver or
the telephone line.
the telephone line.
4. Determine causes
Determine the causes of the equipment problem by troubleshooting.
5. Equipment repairs
Repair or replace the defective parts and take appropriate measures at this stage to ensure that the problem will not recur.
6. Confirm normal operation of the equipment
After completing the repairs, conduct copying, self testing and communication testing to confirm that the equipment operates
normally.
normally.
7. Record keeping
Make a record of the measures taken to rectify the problem for future reference.
4.1.2. MAINTENANCE CHECK ITEMS/COMPONENT LOCATIONS
4.1.2.1. Maintenance List
NO.
OPERATION
CHECK
REMARKS
1
Document Path
Remove any foreign matter such as paper.
—
2
Rollers
If the roller is dirty, clean it with a damp cloth then dry
thoroughly.
thoroughly.
Refer to MAINTENANCE CHECK
ITEMS/COMPONENT LOCATIONS(
P.28).()
ITEMS/COMPONENT LOCATIONS(
P.28).()
28
KX-FL403UA
Click on the first or last page to see other KX-FL403UA service manuals if exist.