Panasonic DVD-LS90EB / DVD-LS90EE / DVD-LS90GCS Service Manual ▷ View online
7.1. Disassembly
9
DVD-LS90EB / DVD-LS90EE / DVD-LS90GCS
7.2. P.C.B. location
7.3. Main cabinet of the unit
<Removing battery pack>
Release the lock lever and remove the battery pack in the
direction of the arrow.
direction of the arrow.
1. Remove the 11 screws from the bottom of the unit.
2. Release the latches and remove the bottom cabinet.
10
DVD-LS90EB / DVD-LS90EE / DVD-LS90GCS
7.4. Traverse assembly
7.4.1. Removing traverse assembly
1. Solder the 2 laser short lands on the flexible cable.
2. Unlock the connectors and remove the flexible cables.
2. Unlock the connectors and remove the flexible cables.
7.4.2. Reinstalling traverse assembly
1. Reinstall the traverse assembly to the specified pin of the
unit.
2. Reinstall the flexible cable of the optical pickpup unit and
lock it securely.
3. Remove the solder of each laser short land of the flexible
cable.
Caution:
Caution:
Remove the solders completely: otherwise the laser
diode won’t emit light.
diode won’t emit light.
4. Reinstall the spindle flexible cable as shown figure.
11
DVD-LS90EB / DVD-LS90EE / DVD-LS90GCS
7.5. Optical pick-up unit
7.5.1. Removing optical pick-up unit
Make sure that the traverse assembly removed before trying to
remove the optical pick-up unit.
When removing the traverse assembly, solder the two laser
short lands on the flexible cable of the optical pick-up unit.
1. Remove the two screws securing the main shaft retainer.
2. Remove the main shaft retainer.
3. Slide the main shaft in the direction indicated by the arrow
remove the optical pick-up unit.
When removing the traverse assembly, solder the two laser
short lands on the flexible cable of the optical pick-up unit.
1. Remove the two screws securing the main shaft retainer.
2. Remove the main shaft retainer.
3. Slide the main shaft in the direction indicated by the arrow
to remove the optical pick-up unit.
7.5.2. Reinstalling optical pick-up unit
The optical pick-up unit is factory adjusted. Do not touch the
adjustment screw.
1. Reassemble the disassembled parts in the reverse order of
adjustment screw.
1. Reassemble the disassembled parts in the reverse order of
disassembly.
2. When reinstalling the traverse assembly on the main unit
after installing the optical pick-up unit, make sure to remove
the solder from each of the two laser short lands on the
flexible cable.
the solder from each of the two laser short lands on the
flexible cable.
Caution:
· Remove the solders completely; otherwise the laser
diode won´t emit light.
· After replacing the optical pick-up unit, check the quality
of images played back and make optical adjustment.
7.6. Disc motor
7.6.1. Removing disc motor
1. Remove the adjustment screws A, B, and C.
2. Remove the disc motor.
2. Remove the disc motor.
7.6.2. Caution to be taken when
replacing the disc motor
1. The mounting screws of the disc motor also serve as
adjustment screws. When reinstalling the disc motor, first
turn the screws A, B, and C as far as they go by usual force
to secure them (do not overtighten).
turn the screws A, B, and C as far as they go by usual force
to secure them (do not overtighten).
2. Back off the adjustment screws A and C two complete turns
and secure them.
3. Back off the adjustment screw B one and a half turns and
secure them.
· This makes it nearly possible to play back disks and
· This makes it nearly possible to play back disks and
adjust the jitter.
Thereafter, adjust the adjustment screws C and A as
indicated.
indicated.
12
DVD-LS90EB / DVD-LS90EE / DVD-LS90GCS
Click on the first or last page to see other DVD-LS90EB / DVD-LS90EE / DVD-LS90GCS service manuals if exist.