Panasonic DVD-LS70EB / DVD-LS70EE / DVD-LS70EG / DVD-LS92EB / DVD-LS92EE / DVD-LS92EG Service Manual ▷ View online
25
10.4. Special Operation Menu
When the power on. Pressing buttons [PLAY],[RETURN] and [TOP MENU] in same time at the unit. Special operation menu will be
display. Select menu by cursor button and press [OK] button to activate the commands.
display. Select menu by cursor button and press [OK] button to activate the commands.
26
10.5. Lens cleaning
When cleaning the lens, use the lens cleaner which product part No. SZZP1038C.
27
11 SERVICE PRECAUTIONS
11.1. Firmware version-up of the DVD player
• The firmware of the DVD player may be renewed to improve the quality including operation ability and playability to the substan-
dard discs.processing to optimize the drive.
• Updating firmware
1. Download latest Firmware and burn it on CD-R disc.
2. Set the CD-R disc into the player and playback it.
3. When the message of recommending version-up appear in the LCD screen, check the Current Version.
2. Set the CD-R disc into the player and playback it.
3. When the message of recommending version-up appear in the LCD screen, check the Current Version.
a. If the version of the firmware installed on the player and the latest firmware version available are the same or the ver-
sion of the firmware installed on the player is higher than the latest version available.
No update is necessary --select [Cancel] to quit.
b. If the version of the firmware installed on the player is lower than the latest version available.
Updating is recommended --select [OK] to continue.
4. If choose [OK], the P-DVD player is automatically updated.
5. Finish the update, the player will restart automatically.
Note:
If the AC power supply is shut out during version-up due to a power failure, the version-up is improperly carried out.
In such a case, replace the Flash ROM and carry out the version-up again.
28
12 ADJUSTMENT PROCEDURES
Caution
Be sure to take static electricity countermeasures before adjusting the optical system. Adjust the optical systems according to
the prescribed procedure.
the prescribed procedure.
12.1. Service Tools and Equipment
12.2. Important points in adjustment
12.2.1. Important points in optical adjustment
• Optical pickup tilt adjustment is needed after replacement of the following components.
1. Optical pickup unit
2. Disc motor
3. Traverse motor
4. Optical pickup peripheral parts (such as rail)
2. Disc motor
3. Traverse motor
4. Optical pickup peripheral parts (such as rail)
Notes
Adjustment is generally unnecessary after replacing other parts of the traverse unit. However, make adjustment if there is
a noticeable degradation in picture quality.
Optical adjustments cannot be made inside the optical pickup.
a noticeable degradation in picture quality.
Optical adjustments cannot be made inside the optical pickup.
12.2.2. Important points in electrical adjustment
• Follow the adjustment procedures described in this Manual.
12.3. Storing and Handling Test Discs
12.4. Optical adjustment
12.4.1. Optical pick gate adjustment
Application
Name
Number
Tilt adjustment
DVD test disc
DVDT-S15AS or DVDT-S01
Inspection
Extension cable + PCB
(Traverse ass’y to main P.C.B.)
(Traverse ass’y to main P.C.B.)
RFKZ0470 (26Pin) + RFKZ0468(PCB)
Extension cable + PCB
(Traverse ass’y to main P.C.B.)
(Traverse ass’y to main P.C.B.)
RFKZ0471 (7Pin) + RFKZ0469(PCB)
Tilt adj. jig
RFKZ0118
Others
Screw lock
RZZ0L01
Grease
JGS0101
Lubricating oil
RFKXGUD24
Confirmation
CD test disc
PVCD-K06
or any other commercially available disc
or any other commercially available disc
VCD test disc
PVCD-K06
or any other commercially available disc
or any other commercially available disc
• Surface precision is vital for DVD test discs. Be sure to store and handle them carefully.
1. Do not place discs directly onto the workbench, etc., after use.
2. Handle discs carefully in order to maintain their flatness. Place them into their case after use and store them vertically. Store
2. Handle discs carefully in order to maintain their flatness. Place them into their case after use and store them vertically. Store
discs in a cool place where they are not exposed to direct sunlight or air from air conditioners.
3. Accurate adjustment will not be possible if the disc is warped when placed on a surface made of glass, etc. If this happens, use a
new test disc to make optical adjustments.
4. If adjustment is done using a warped disc, the adjustment will be incorrect and some discs will not be playable.
Measurement point
Adjustment point
Mode
Disc
-----
Tangential adjustment screw
(Adjustment screw A)
Radial tilt adjustment screw
(Adjustment screw B)
(Adjustment screw A)
Radial tilt adjustment screw
(Adjustment screw B)
Tracking servo "ON"
Tracking servo "ON"
DVDT-S01/S15AS
Measuring apparatus
Adjustment value
None (Use the service indication on the main unit)
Adjust the jitter value to the minimum level.
Click on the first or last page to see other DVD-LS70EB / DVD-LS70EE / DVD-LS70EG / DVD-LS92EB / DVD-LS92EE / DVD-LS92EG service manuals if exist.