Panasonic DMP-BDT210EE Simplified Service Manual ▷ View online
8
2.5.
Static Electricity Protection Measures
• The laser diode in the traverse unit (optical pick-up) may break down due to potential difference caused by static electricity of
clothes or human body.
So, be careful of electrostatic breakdown during repair of the traverse unit (optical pick-up).
So, be careful of electrostatic breakdown during repair of the traverse unit (optical pick-up).
2.6.
Ground for electrostatic breakdown prevention
• As for parts that use optical pick-up (laser diode), the optical pick-up is destroyed by the static electricity of the working environ-
ment.
Repair in the working environment that is grounded.
Repair in the working environment that is grounded.
2.6.1.
Work table grounding
• Put a conductive material (sheet) or steel sheet on the area where the traverse unit (optical pick-up) is placed, and ground the
sheet.
2.6.2.
Human body grounding
• Use the anti-static wrist strap to discharge the static electricity from your body.
2.6.3.
When exchange the BDP Drive
• Before remove the ESD prevention bag, make sure to use the anti-static wrist strap to discharge the static electricity when
replace the BDP Drive.
Note:
Note:
The ESD prevention bag is used to replace the original short-circuit point.
It can be removed while placing the BDP Drive.
It can be removed while placing the BDP Drive.
9
3 Service Navigation
3.1.
Service Infomation
This service manual contains technical information which will allow service personnel’s to understand and service this model.
Please place orders using the parts list and not the drawing reference numbers.
Please place orders using the parts list and not the drawing reference numbers.
If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with original service
manual.
manual.
1. This service manual does not contain the following information, because of the impossibility of servicing at component level.
• Schematic Diagram, Block Diagram and P.C.B. layout of BD Digital P.C.B..
• Parts List for individual parts of BD Digital P.C.B..
• Exploded View and Parts List for individual parts of Drive Unit.
• Parts List for individual parts of BD Digital P.C.B..
• Exploded View and Parts List for individual parts of Drive Unit.
2. The following category are recycle module part. Please send them to Central Repair Center.
• BD Digital P.C.B. (DMP-BDT210EB: RFKB76234U)
• BD Digital P.C.B. (DMP-BDT210EF/EG: RFKB76234T)
• Drive Unit: VXY2122T
• BD Digital P.C.B. (DMP-BDT210EF/EG: RFKB76234T)
• Drive Unit: VXY2122T
10
3.2.
Caution for DivX
“Warning for Customers Who Use DivX Video-on-Demand content” when replacing the FLASH ROM or EEPROM or P.C.B.
First, copy the Last part of this page for the customers who continue to use DivX Video-on-Demand service.
First, copy the Last part of this page for the customers who continue to use DivX Video-on-Demand service.
Appendix:
*Parts that memorize user’s information are only FLASH ROM.
*The registration of Registration Code is possible for half a year up to 6 recorders up to 10 recorders a year.
*Parts that memorize user’s information are only FLASH ROM.
*The registration of Registration Code is possible for half a year up to 6 recorders up to 10 recorders a year.
Registration Code is memorized in FLASH ROM (BD Digital P.C.B.).
If exchange above P.C.B. or FLASH ROM, new registration Code differ from previous Registration Code will be generated.
In this case if your customer uses DivX Video-on-Demand service, he/she will no longer be able to play any content that he/she pur-
chased under that same registration code.
Therefore your customer will need to obtain and register the new registration code.
If exchange above P.C.B. or FLASH ROM, new registration Code differ from previous Registration Code will be generated.
In this case if your customer uses DivX Video-on-Demand service, he/she will no longer be able to play any content that he/she pur-
chased under that same registration code.
Therefore your customer will need to obtain and register the new registration code.
*Copy this page and cut on the dotted line and give the lower half to your customer.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Warning for Customers Who Use the DivX Video-on-Demand content.
1. The registration code has been changed for the repair of the product or the product exchange.
2. Obtain and register a new registration code, otherwise you will no longer be able to play DivX Video-on-Demand content.
3. Follow the procedure on the DivX Video-on-Demand web site to register at http://vod.divx.com/.
2. Obtain and register a new registration code, otherwise you will no longer be able to play DivX Video-on-Demand content.
3. Follow the procedure on the DivX Video-on-Demand web site to register at http://vod.divx.com/.
*If you do not use the DivX Video-on-Demand content, please ignore this warning.
11
4 Specifications
Power supply:
AC 220 to 240 V, 50 Hz
Power consumption:
Approx. 11 W
In standby mode:
Approx. 0.2 W
In quick start standby mode:
Approx. 3.3 W
Operating temperature range: +5
°C to +35°C
Operating humidity range:
10 % to 80 % RH (no condensation)
Signal system:
PAL/NTSC
Video output:
Output level:
1.0 Vp-p (75
Ω)
Output connector:
Pin jack (1 system)
Video performance:
Horizontal resolution:
More than 500 lines
Video S/N ratio:
More than 65 dB
Audio output:
Output level:
2 Vrms (1 kHz, 0 dB)
Output connector:
Pin jack
Number of connectors:
2 channel (1 system)
Audio performance:
Frequency response:
DVD(linear audio):
4 Hz to 22 kHz (48 kHz sampling)
4 Hz to 44 kHz (96 kHz sampling)
4 Hz to 44 kHz (96 kHz sampling)
CD-Audio:
4 Hz to 20 kHz
S/N ratio:
100 dB
Dynamic range:
100 dB
Total harmonic distortion:
0.004 %
Digital audio output:
Optical digital output:
Optical terminal
HDMI AV output:
Output format:
480p(525p)/576p(625p)/
1080i(1125i)/720p(750p)/
1080p(1125p)
HDMI (V.1.4a with 3D, Content
Type)
This unit supports “HDAVI Control 5”
function.
1080i(1125i)/720p(750p)/
1080p(1125p)
HDMI (V.1.4a with 3D, Content
Type)
This unit supports “HDAVI Control 5”
function.
Output connector:
TypeA (19 pin): 1 system
SD card slot:
Connector:
1 system
USB slot:
USB2.0:
2 system
Ethernet:
10BASE-T/100BASE-TX:
1 system
Wireless LAN:
Antennna:
Tx 1, Rx 2
Standard Compliance:
IEEE802.11n / IEEE802.11a /
IEEE802.11g / IEEE802.11b
IEEE802.11g / IEEE802.11b
Transmission system:
MISO-OFDM system,
OFDM system, DSSS system
OFDM system, DSSS system
Frequency Range:
IEEE802.11n / IEEE802.11a:
5.15GHz - 5.35GHz
5.47GHz - 5.825GHz
IEEE802.11g / IEEE802.11b /
IEEE802.11n:
2.4GHz - 2.4835GHz
5.15GHz - 5.35GHz
5.47GHz - 5.825GHz
IEEE802.11g / IEEE802.11b /
IEEE802.11n:
2.4GHz - 2.4835GHz
Transfer rate (standard):
IEEE802.11n: Tx Max 150Mbps,
* Transfer rates are
theoretial values; however,
actual communication rate
will vary according to
communication
environment or connected
equipment.
actual communication rate
will vary according to
communication
environment or connected
equipment.
Rx Max 300Mbps
IEEE802.11g / IEEE802.11a:
Max 54Mbps
IEEE802.11b: Max 11Mbps
IEEE802.11g / IEEE802.11a:
Max 54Mbps
IEEE802.11b: Max 11Mbps
Access Mode:
Infrastructure mode
Security:
WPA2-PSK(TKIP/AES)
* This unit supports WPA
and WPA2 encription
WPA-PSK(TKIP/AES)
WEP(64bit/128bit)
WEP(64bit/128bit)
Optical pick-up:
System with 2 lenses
Wave length:
790 nm (CDs)/655 nm (DVDs)/
405 nm (BDs)
405 nm (BDs)
LASER Specification
Class 1 LASER Product:
Class 1 LASER Product:
Wave length:
790 nm (CDs)/655 nm (DVDs)/
405 nm (BDs)
405 nm (BDs)
Laser power:
No hazardous radiation is emitted
with the safety protection
with the safety protection
Region management
information:
information:
DVD-Video:
region number “2” or “ALL”
BD-Video:
region code “B”
Media:
Playable disc:
BD-Video (Blu-ray 3D, BD-
LIVE, BONUS VIEW):
LIVE, BONUS VIEW):
BD-ROM Version 2.4
BD-RE:
Version3(Single Layer / Dual Layer),
JPEG, MPO
JPEG, MPO
BD-R:
Version2(Single Layer / Dual Layer),
DivX*
4
*
5
*
6
, MKV*
4
*
6
*
7
DVD-R/DVD-R DL:
DVD-Video format*
1
,
DVD Video Recording format*
1
,
AVCHD format*
1
, JPEG*
2
, MPO*
2
,
MP3*
2
, DivX*
2
*
3
*
5
*
6
, MKV*
2
*
3
*
6
*
7
DVD-RW:
DVD-Video format*
1
,
DVD Video Recording format*
1
,
AVCHD format*
1
+R/+RW/+R DL:
Video*
1
, AVCHD format*
1
DVD-Video:
DVD-Video format
CD-Audio:
CD-DA
CD-R/CD-RW:
CD-DA, JPEG*
2
, MPO*
2
, MP3*
2
,
DivX*
2
*
5
*
6
, MKV*
2
*
6
*
7
*1 Finalizing is necessary.
*2 ISO9660 level 1 or 2 (except for extended formats), Joliet
*2 ISO9660 level 1 or 2 (except for extended formats), Joliet
This unit is compatible with multi-session.
This unit is not compatible with packet writing.
This unit is not compatible with packet writing.
*3 UDF1.02 without ISO9660, UDF1.5 with ISO9660
*4 UDF2.5
*5 DivX Certified to play DivX video up to Plus HD 1080p,
*4 UDF2.5
*5 DivX Certified to play DivX video up to Plus HD 1080p,
including premium content.
GMC (Global Motion Compensation) is not supported.
GMC (Global Motion Compensation) is not supported.
*6 Maximum number of folders recognizable: 300 folders.
(including the root folder)
Maximum number of files recognizable: 200 files.
Maximum number of files recognizable: 200 files.
*7 MPEG-4 AVC (H.264) profile is up to High Profile, Level 4.
AAC-LC, MP3 and Dolby Digital, DTS and PCM audio can be
decoded.
decoded.
SD card:
SD Memory Card*
8
formatted FAT12, FAT16,
FAT32*
9
, exFAT*
10
JPEG, MPO, AVCHD format,
MPEG-2
MPEG-2
*8 support SDHC, SDXC card
support miniSD
TM
Cards (need a miniSD
TM
Adaptor.)
support microSD
TM
/microSDHC/microSDXC Cards
(need a microSD
TM
Adaptor.)
*9 Not support long file name
*10 SDXC only
USB device:
USB device:
USB Standard:
USB 2.0 High Speed
MP3, JPEG, MPO, DivX, MKV
MP3, JPEG, MPO, DivX, MKV
Format:
FAT12, FAT16, FAT32
Click on the first or last page to see other DMP-BDT210EE service manuals if exist.