Panasonic DMP-B200P / DMP-B200PC Service Manual ▷ View online
25
2. Remove the disc cover in order of (a) and (b).
Caution:
Please don't lose the spring.
9.8.
Monitor assembly
1. Remove the connector and the flexible cable.
2. Remove the 2 screws.
2. Remove the 2 screws.
3. Release the latches and remove the JIKU COVER L/R.
4. Remove the screw and remove the monitor assembly.
9.9.
Monitor cover
1. Remove the 2 rubbers and the 2 screws (A).
26
2. Remove the 3 screws (B) and screw (C).
3. Remove the connector and the flexible cable.
4. Remove the monitor cover.
<Caution to be taken when installing monitor cover>
Please do not nip the wire.
9.10. Mono arm
1. Remove the connector and 2 screws, then remove the
monitor sheet.
2. Release the latches and remove the shaft cover.
3. Release the friction hinge from boss and remove the
mono arm assembly.
4. Remove the 6 screws.
5. Release the latches and remove the mono arm cover.
27
6. Remove the plate and friction hinge (A)/(B).
9.11. LCD panel
1. Remove the 4 screws.
2. Remove the monitor angle.
2. Remove the monitor angle.
3. Remove the LCD panel.
28
9.12. Cleaning of the Optical Pick-up
Disassemble to the item 4 (9.3. MAIN CABINET UNIT), and clean the optical pick-up.
Click on the first or last page to see other DMP-B200P / DMP-B200PC service manuals if exist.