DOWNLOAD Panasonic DMC-TZ4P / DMC-TZ4PC / DMC-TZ4PL / DMC-TZ4EB / DMC-TZ4EE / DMC-TZ4EF / DMC-TZ4EG / DMC-TZ4E / DMC-TZ11GC / DMC-TZ11GK / DMC-TZ11GN / DMC-TZ11GT / DMC-TZ11GJ Service Manual ↓ Size: 2.65 MB | Pages: 56 in PDF or view online for FREE

37

The relation between Replaced part and Necessary Adjustment is shown in the following table.
When concerned part is replaced, be sure to achieve the necessary adjustment(s).
As for Adjustment condition/procedure, consult the “Adjustment Manual” which is available in Adjustment software.
The Adjustment software is available at “TSN Website”, therefore, access to “TSN Website” at “Support Information from NWBG/
VDBG-PAVC”.
NOTE:

After adjustments have been terminated, make sure to achieve “INITIAL SETTINGS”.

*1 This adjustment is necessary, not only replacing CCD unit but also removing it from the lens unit.

*There is no LCD adjustment in this model.

Replaced Part

Adjustment Item

Main P.C.B.

VENUS 

(IC6001)

Flash-ROM 

(IC6002)

Lens Part 

(Excluding 

CCD)

CCD Unit

Camera
Section

OIS hall element adjustment
(OIS)

O

O

O

O

-

Back focus adjustment
(BF)

O

O

O

O

O*1

Shutter adjustment
(SHT)

O

O

O

O

O

ISO sensitivity adjustment
(ISO)

O

O

O

O

O

AWB adjustment
High brightness coloration inspection
(WBL)

O

O

O

O

O

CCD white scratch compensation
(WKI)

O

O

O

-

O*1

CCD black scratch compensation
(BKI)

O

O

O

-

O*1

38

Do not touch the surface of lens, Viewfinder and LCD Panel with your hand.
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the their surface.
Note:

The Lens Cleaning KIT ; VFK1900BK(Only supplied as 10 set/Box) is available as Service Aid.

S-1

S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1

S2. Voltage Chart ........................................................................... S-2
S2.1. Flash P.C.B. .......................................................................... S-2

S3. Block Diagram .......................................................................... S-3
S3.1. Overall Block Diagram .......................................................... S-3

S4. Schematic Diagram .................................................................. S-4
S4.1. Interconnection Diagram ....................................................... S-4
S4.2. Flash Schematic Diagram ..................................................... S-5
S4.3. Top Operation Schematic Diagram ....................................... S-6
S4.4. CCD Flex Schematic Diagram .............................................. S-7
S4.5. Lens Flex Schematic Diagram .............................................. S-8

S5. Print Circuit Board .................................................................... S-9
S5.1. Flash P.C.B. .......................................................................... S-9
S5.2. Top Operation P.C.B. ........................................................... S-10
S5.3. CCD Flex P.C.B. .................................................................. S-11
S5.4. Lens Flex P.C.B. .................................................................. S-12

S6. Replacement Parts List .......................................................... S-13
 
S7. Exploded View ....................................................................... S-17
S7.1. Frame and Casing Section.................................................. S-17
S7.2. Packing Parts and Accessories Section .............................. S-18

Table of contents

DSC0803023CE

Vol. 1

(S)...........Silver Type

Colour

(K)...........Black Type (except GT)

Model No.
DMC-TZ4P
DMC-TZ4PC
DMC-TZ4PL
DMC-TZ4EB
DMC-TZ4EE
DMC-TZ4EF
DMC-TZ4EG

DMC-TZ4E
DMC-TZ11GC
DMC-TZ11GK
DMC-TZ11GN
DMC-TZ11GT
DMC-TZ11GJ

Digital Camera

Name of Signal

OFTR

FEP

This signal is connected
to the FEP schematic diagram.

Circuit name being connected.

6.Use the parts number indicated on the Replacement Parts List .

7.Indication on Schematic diagrams:

5.The voltage being indicated here may be include observational-error (deviation) due to

internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.

4.Although the voltage and waveform available on here is measured with standard frame,

it may be differ from actual measurement due to modification of circuit and so on.

3.The voltage being indicated on the schematic diagram is measured in

"Standard-Playback" mode when there is no specify mode is mentioned.

2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.

when the TP (Test Point) indicated as "

" mark.

1.Although reference number of the parts is indicated on the P.C.B. drawing and/or

schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.

FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.

COMPONENTS IDENTIFIED WITH THE MARK

HAVE THE SPECIAL CHARACTERISTICS

S-2

Note) Indicated voltage values are the standard values for the unit measured by the DC electronic circuit tester (high-impedance) with the chassis taken as standard. 

          Therefore, there may exist some errors in the voltage values, depending on the internal impedance of the DC circuit tester. 

REF No.

PIN No.

POWER ON

IC8001

1

-

IC8001

2

0

IC8001

3

4.9

IC8001

4

0

IC8001

5

0

Q8009

1

5.1

Q8009

2

5.1

Q8009

3

0

Q8009

4

0

Q8009

5

5.1

Q8009

6

5.1