Panasonic DMC-S1P / DMC-S1PC / DMC-S1PR / DMC-S1PU / DMC-S1EB / DMC-S1EE / DMC-S1EF / DMC-S1EG / DMC-S1EP / DMC-S1GA / DMC-S1GC / DMC-S1GD / DMC-S1GF / DMC-S1GK / DMC-S1GN / DMC-S1GT Service Manual ▷ View online
17
Selecting the Recording Mode
Press the Power button ( )
The power is turned on.
Press the [MODE] button ( )
3UHVVŸźŻŹWRVHOHFWWKH
Recording Mode
Press [MENU/SET] ( )
Recording Mode
Press [MENU/SET] ( )
[Intelligent Auto] Mode
Taking pictures with automatic settings.
Taking pictures with automatic settings.
[Normal Picture] Mode
Take pictures with your own settings.
Take pictures with your own settings.
[Scene Mode]
Take pictures according to scene.
Take pictures according to scene.
[Motion Picture] Mode
Take motion pictures.
Take motion pictures.
Preparation
About the Battery
The camera has a function for distinguishing batteries which can be used safely. The
dedicated battery supports this function. The only batteries suitable for use with this
dedicated battery supports this function. The only batteries suitable for use with this
unit are genuine Panasonic products and batteries manufactured by other companies
and certified by Panasonic. (Batteries which do not support this function cannot be
used). Panasonic cannot in any way guarantee the quality, performance or safety of
and certified by Panasonic. (Batteries which do not support this function cannot be
used). Panasonic cannot in any way guarantee the quality, performance or safety of
batteries which have been manufactured by other companies and are not genuine
Panasonic products.
Panasonic products.
It has been found that counterfeit battery packs which look very similar to the
genuine product are made available to purchase in some markets. Some of these
battery packs are not adequately protected with internal protection to meet the
requirements of appropriate safety standards. There is a possibility that these
battery packs may lead to fire or explosion. Please be advised that we are not
liable for any accident or failure occurring as a result of use of a counterfeit
battery pack. To ensure that safe products are used we would recommend that a
genuine Panasonic battery pack is used.
genuine product are made available to purchase in some markets. Some of these
battery packs are not adequately protected with internal protection to meet the
requirements of appropriate safety standards. There is a possibility that these
battery packs may lead to fire or explosion. Please be advised that we are not
liable for any accident or failure occurring as a result of use of a counterfeit
battery pack. To ensure that safe products are used we would recommend that a
genuine Panasonic battery pack is used.
18
6 Service Mode
6.1.
Error Code Memory Function
1. General description
This unit is equipped with history of error code memory function, and can be memorized 16 error codes in sequence from the
latest. When the error is occurred more than 16, the oldest error is overwritten in sequence.
The error code is not memorized when the power supply is shut down forcibly (i.e.,when the unit is powered on by the battery,
the battery is pulled out) The error code is memorized to FLASH-ROM when the unit has just before powered off.
latest. When the error is occurred more than 16, the oldest error is overwritten in sequence.
The error code is not memorized when the power supply is shut down forcibly (i.e.,when the unit is powered on by the battery,
the battery is pulled out) The error code is memorized to FLASH-ROM when the unit has just before powered off.
2. How to display
The error code can be displayed by ordering the following procedure:
• Preparation:
1. Attach the Battery or AC Adaptor with a DC coupler to the unit.
NOTE:
*Since this unit has built-in memory, it can be performed without inserting SD memory card.
2. Turn the Power on.
3. Press the [ MODE ] button, and select the [ NORMAL PICTURE ] mode by Cursor buttons, then press the [ MENU/SET ]
button.
NOTE:
*Since this unit has built-in memory, it can be performed without inserting SD memory card.
2. Turn the Power on.
3. Press the [ MODE ] button, and select the [ NORMAL PICTURE ] mode by Cursor buttons, then press the [ MENU/SET ]
button.
• Step 1. The temporary cancellation of “INITIAL SETTINGS”:
While pressing “[ W ] side of Zoom button” and “[ UP ] of Cursor button” simultaneously, turn the power on.
• Step 2. Execute the error code display mode:
While pressing the "[ W ] side of the Zoom button", press the "[ LEFT ] of Cursor button" and the "[ MENU/SET ] button simul-
taneously.
Every time when performing above operation, the display is changed as shown below.
Normal display
taneously.
Every time when performing above operation, the display is changed as shown below.
Normal display
→ Error code display → Operation history display →Normal display →.....
Example of Error Code Display
19
• 3. Error Code List
The error code consists of 8 bits data and it shows the following information.
20
Important notice about "Error Code List"
1) About "*" indication:
The third digit from the left is different as follows.
1) About "*" indication:
The third digit from the left is different as follows.
- In case of 0 (example: 18001000)
When the third digit from the left shows "0", this error occurred under the condition of INITIAL SETTINGS has been
completed.
It means that this error is occurred basically at user side.
completed.
It means that this error is occurred basically at user side.
- In case of 8 (example: 18801000)
When the third digit from the left shows "8", this error occurred under the condition of INITIAL SETTINGS has been
released.
(Example; Factory assembling-line before unit shipment, Service mode etc.)
It means that this error is occurred at service side.
released.
(Example; Factory assembling-line before unit shipment, Service mode etc.)
It means that this error is occurred at service side.
2) About "?" indication: ("18*0 0?01" to "18*0 0?50"):
The third digit from the right shows one of the hexadecimal ("0" to "F") character.
The third digit from the right shows one of the hexadecimal ("0" to "F") character.
• 4. How to exit from Error Code display mode:
Simply, turn the power off. (Since Error code display mode is executed under the condition of temporary cancellation of "INI-
TIAL SETTINGS", it wake up with normal condition when turn off the power.)
TIAL SETTINGS", it wake up with normal condition when turn off the power.)
NOTE:
The error code can not be initialized.
Click on the first or last page to see other DMC-S1P / DMC-S1PC / DMC-S1PR / DMC-S1PU / DMC-S1EB / DMC-S1EE / DMC-S1EF / DMC-S1EG / DMC-S1EP / DMC-S1GA / DMC-S1GC / DMC-S1GD / DMC-S1GF / DMC-S1GK / DMC-S1GN / DMC-S1GT service manuals if exist.