Panasonic DMC-L1KPP / DMC-L1KEB / DMC-L1KEG / DMC-L1KGC / DMC-L1KGK / DMC-L1KGN / DMC-L1KGT Service Manual ▷ View online
11 MAINTENANCE
21
DMC-L1KPP / DMC-L1KEB / DMC-L1KEG / DMC-L1KGC / DMC-L1KGK / DMC-L1KGN / DMC-L1KGT
22
DMC-L1KPP / DMC-L1KEB / DMC-L1KEG / DMC-L1KGC / DMC-L1KGK / DMC-L1KGN / DMC-L1KGT
12 SERVICE NOTES
12.1. ABOUT THE LENS (Being Supplied as a KIT)
To minimize the possibilities of getting the dust/dirt on the lens surface, keep putting the lens cap other than necessary case.
The parts other than listed in replacement parts list are not allowed to disassemble/assemble.
It is not allowed to disassemble the Lens outside of the proper Clean facilities.
Once it is disassembled, proper adjustment/inspection facilities are required which are rather expensive.
The parts other than listed in replacement parts list are not allowed to disassemble/assemble.
It is not allowed to disassemble the Lens outside of the proper Clean facilities.
Once it is disassembled, proper adjustment/inspection facilities are required which are rather expensive.
12.2. ABOUT THE BODY
To squeeze the possibilities of getting the dust/dirt inside of the Mount space, keep putting the lens cap other than necessary case.
The parts other than listed in replacement parts list are not allowed to disassemble/assemble.
Since there is a open space especially in Finder unit, it gets dust/dirt easily.
Therefore, it is not allowed to replace the outer casing parts (such as Front, Rear, Top case and so on ) which are not listed in the
Replacement Parts list at the outside of the proper Clean facilities.
Besides, once it is disassembled, proper adjustment/inspection facilities are required which are rather expensive.
The parts other than listed in replacement parts list are not allowed to disassemble/assemble.
Since there is a open space especially in Finder unit, it gets dust/dirt easily.
Therefore, it is not allowed to replace the outer casing parts (such as Front, Rear, Top case and so on ) which are not listed in the
Replacement Parts list at the outside of the proper Clean facilities.
Besides, once it is disassembled, proper adjustment/inspection facilities are required which are rather expensive.
23
DMC-L1KPP / DMC-L1KEB / DMC-L1KEG / DMC-L1KGC / DMC-L1KGK / DMC-L1KGN / DMC-L1KGT
Refer to the following table and the illustration for disassembly
and assembly.
and assembly.
Part name
Ref. No.
Unscrew
Grip piece front (L)
14
B3, B15
Grip piece front (R) unit
40
B12, B13, B14
SD door unit
101
B22, B23
Shading frame
403
B401, B402, B403
13 DISASSEMBLY/ASSEMBLY
24
DMC-L1KPP / DMC-L1KEB / DMC-L1KEG / DMC-L1KGC / DMC-L1KGK / DMC-L1KGN / DMC-L1KGT
Click on the first or last page to see other DMC-L1KPP / DMC-L1KEB / DMC-L1KEG / DMC-L1KGC / DMC-L1KGK / DMC-L1KGN / DMC-L1KGT service manuals if exist.