Panasonic DMC-L1KPP / DMC-L1KEB / DMC-L1KEG / DMC-L1KGC / DMC-L1KGK / DMC-L1KGN / DMC-L1KGT Service Manual ▷ View online
2006
DMC-L1KPP
DMC-L1KEB
DMC-L1KEG
DMC-L1KGC
DMC-L1KGK
DMC-L1KGN
DMC-L1KGT
DMC-L1KEB
DMC-L1KEG
DMC-L1KGC
DMC-L1KGK
DMC-L1KGN
DMC-L1KGT
Vol. 1
Colour
(K)...........Black Type
(K)...........Black Type
Digital Camera/Lens Kit
ORDER NO. DSC0608017CE
B26
1 INTRODUCTION
3
1.1.
INTRODUCTION
3
1.2.
HOW TO DEFINE THE MODEL SUFFIX (NTSC or PAL
model)
3
2 SAFETY PRECAUTIONS
6
2.1.
GENERAL GUIDELINES
6
2.2.
LEAKAGE CURRENT COLD CHECK
6
2.3.
LEAKAGE CURRENT HOT CHECK (See Figure 1.)
6
3 PREVENTION OF ELECTRO STATIC DISCHARGE (ESD) TO
ELECTROSTATICALLY SENSITIVE (ES) DEVICES
7
4 HOW TO RECYCLE THE LITHIUM ION BATTERY(U.S. ONLY)
7
5 CAUTION FOR AC CORD (EB/GC only)
8
5.1.
INFORMATION FOR YOUR SAFETY
8
5.2.
CAUTION FOR AC MAINS LEAD
8
6 OPERATING GUIDE
9
7 OPERATING INFORMATION
10
8 TROUBLESHOOTING
14
9 ERROR CODE MEMORY FUNCTION
18
10 CONFIRMATION OF FIRMWARE VERSION
20
11 MAINTENANCE
21
12 SERVICE NOTES
23
12.1. ABOUT THE LENS (Being Supplied as a KIT)
23
12.2. ABOUT THE BODY
23
13 DISASSEMBLY/ASSEMBLY
24
14 EXPLODED VIEWS
25
14.1. FRAME & CASING SECTION
25
14.2. LENS SECTION
26
14.3. PACKING PARTS & ACCESSORIES SECTION
27
15 REPLACEMENT PARTS LIST
28
15.1. MECHANICAL REPLACEMENT PARTS LIST
28
CONTENTS
Page
Page
2
DMC-L1KPP / DMC-L1KEB / DMC-L1KEG / DMC-L1KGC / DMC-L1KGK / DMC-L1KGN / DMC-L1KGT
1 INTRODUCTION
1.1. INTRODUCTION
This service manual contains technical information, which allow service personnel’s to understand and service this model.
Please place orders using the parts list and not the drawing reference numbers.
If the circuit is changed or modified, the information will be followed by service manual to be controlled with original service manual.
Please place orders using the parts list and not the drawing reference numbers.
If the circuit is changed or modified, the information will be followed by service manual to be controlled with original service manual.
1.2. HOW TO DEFINE THE MODEL SUFFIX (NTSC or PAL model)
There are six kinds of DMC-L1K, regardless of the colours.
·a) DMC-L1KS
·b) DMC-L1KPP
·c) DMC-L1KEB/EG/GN
·d) DMC-L1KGC
·e) DMC-L1KGT
·f) DMC-L1KGK
(DMC-L1KS is exclusively Japan domestic model.)
What is the difference is that the “INITIAL SETTING” data which is stored in Flash ROM mounted on Main PCB.
·a) DMC-L1KS
·b) DMC-L1KPP
·c) DMC-L1KEB/EG/GN
·d) DMC-L1KGC
·e) DMC-L1KGT
·f) DMC-L1KGK
(DMC-L1KS is exclusively Japan domestic model.)
What is the difference is that the “INITIAL SETTING” data which is stored in Flash ROM mounted on Main PCB.
1.2.1. Defining methods:
To define the model suffix to be serviced, refer to the nameplate which is putted on the bottom side of the Unit.
3
DMC-L1KPP / DMC-L1KEB / DMC-L1KEG / DMC-L1KGC / DMC-L1KGK / DMC-L1KGN / DMC-L1KGT
1.2.2. INITIAL SETTINGS:
When you replace the Main PCB be sure to perform the initial settings after achieving the Adjustment, by ordering the following
procedure in accordance with model suffix.
·Step 1. The temporary cancellation of factory setting:
procedure in accordance with model suffix.
·Step 1. The temporary cancellation of factory setting:
Set the shutter speed dial to “ 8 ”.
While keep pressing AFL/AEL , then turn the Power on.
While keep pressing AFL/AEL , then turn the Power on.
·Step 2. The cancellation of factory setting:
Press the “ Playback ” button to playback mode.
Press FUNC.2 and “ UP of Cursor key” simultaneously, then turn the Power off.
Press FUNC.2 and “ UP of Cursor key” simultaneously, then turn the Power off.
·Step 3. Turn the Power on:
Set the shutter speed dial to “ A ”, and then turn the Power on.
·Step 4. Display the INITIAL SETTING:
1. Press the Playback button, and then viewing information display.
2. While keep pressing MENU/SET and “ RIGHT of Cursor key” simultaneously, turn the Power off.
2. While keep pressing MENU/SET and “ RIGHT of Cursor key” simultaneously, turn the Power off.
·Step 5. Set the INITIAL SETTING:
Select the area with pressing “ UP / DOWN of Cursor key”, and then press the “ RIGHT of Cursor key”.
The only set area is displayed, and then press the “ RIGHT of Cursor key” after confirmation.
(The unit is powered off automatically.)
(The unit is powered off automatically.)
4
DMC-L1KPP / DMC-L1KEB / DMC-L1KEG / DMC-L1KGC / DMC-L1KGK / DMC-L1KGN / DMC-L1KGT