Panasonic DMC-GH1KPP / DMC-GH1KEB / DMC-GH1KEC / DMC-GH1KEG / DMC-GH1KGC / DMC-GH1KGH / DMC-GH1KGK / DMC-GH1KGN / DMC-GH1KGT / DMC-GH1KGC9K Service Manual ▷ View online
13
3.4.2.
INITIAL SETTINGS:
When you replace the MAIN PCB, be sure to perform the initial settings after achieving the adjustment by ordering the following pro-
cedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
cedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
Before proceeding Initial settings, be sure to read the following CAUTIONS.
2. PROCEDURES:
•
Preparation
Insert the SD memory card which has a few photo data.
Insert the SD memory card which has a few photo data.
•
Step 1. The temporary cancellation of initial setting:
Set the Drive mode lever to [ SINGLE ].
While keep pressing [ DISPLAY ] and [ FILM MODE ] buttons simultaneously, turn the Power on.
Set the Drive mode lever to [ SINGLE ].
While keep pressing [ DISPLAY ] and [ FILM MODE ] buttons simultaneously, turn the Power on.
•
Step 2. The cancellation of initial setting:
Press the [PLAYBACK] button, then playback the picture.
Press [ FILM MODE ] and “[ UP ] of Cursor buttons” simultaneously, then turn the Power off.
Press the [PLAYBACK] button, then playback the picture.
Press [ FILM MODE ] and “[ UP ] of Cursor buttons” simultaneously, then turn the Power off.
•
Step 3. Turn the Power on:
Set the mode dial to [ P ], and then turn the Power on.
Set the mode dial to [ P ], and then turn the Power on.
•
Step 4. Display the INITIAL SETTING:
While keep pressing [ MENU/SET ] and “[ RIGHT ] of Cursor buttons” simultaneously, turn the Power off.
When MAIN P.C.B. is replaced, all of the model suffix is displayed as follows.
There are two kinds of “INITIAL SETTINGS” menu format.
[CASE 1. After replacing MAIN P.C.B.]
While keep pressing [ MENU/SET ] and “[ RIGHT ] of Cursor buttons” simultaneously, turn the Power off.
When MAIN P.C.B. is replaced, all of the model suffix is displayed as follows.
There are two kinds of “INITIAL SETTINGS” menu format.
[CASE 1. After replacing MAIN P.C.B.]
[Except "EG, EB and EC" models : (VEP56084A is used as a Main P.C.B.)]
When MAIN P.C.B. has just been replaced, all of the model suffix are displayed as follows. (two pages in total)
When MAIN P.C.B. has just been replaced, all of the model suffix are displayed as follows. (two pages in total)
[Only for "EG, EB and EC" models : (VEP56084B is used as a Main P.C.B.)]
When MAIN P.C.B. has just been replaced, only 4 model suffix are displayed as follows.
When MAIN P.C.B. has just been replaced, only 4 model suffix are displayed as follows.
14
[CASE 2. Other than "After replacing MAIN P.C.B."]
•
Step 5. Set the INITIAL SETTING: (Refer to “CAUTION 1”)
[Caution: After replacing MAIN P.C.B.]
[Caution: After replacing MAIN P.C.B.]
The model suffix can been chosen,
JUST ONE TIME.
Once one of the model suffix have been chosen, the model suffix lists will not be displayed, thus, it can be changed.
Select the area carefully.
Select the area carefully.
Select the area with pressing “[ UP ] / [ DOWN ] of Cursor buttons”, and then press the “[ RIGHT ] of Cursor buttons”.
The only set area is displayed, and then press the “[ RIGHT ] of Cursor buttons” after confirmation.
(The unit is powered off automatically.)
Confirm the display of “PLEASE SET THE CLOCK” in English when the unit is turned on again.
(The unit is powered off automatically.)
Confirm the display of “PLEASE SET THE CLOCK” in English when the unit is turned on again.
•
Step 6. CONFIRMATION:
The display shows “PLEASE SET THE CLOCK” when turn the Power on again.
When the unit is connected to PC with USB cable, it is detected as removable media.
The display shows “PLEASE SET THE CLOCK” when turn the Power on again.
When the unit is connected to PC with USB cable, it is detected as removable media.
1) As for your reference Default setting condition is given in the following table.
•
Default setting (After “INITIAL SETTINGS”)
MODEL
VIDEO OUTPUT
LANGUAGE
DATE
REMARKS
a) DMC-GH1K (Japan domestic model)
NTSC
Japanese
Year/Month/Date
b) DMC-GH1KPP
NTSC
English
Month/Date/Year
c) DMC-GH1KEB/EC/EG/GC/GH/GN
PAL
English
Date/Month/Year
d) DMC-GH1KGK
PAL
Chinese (simplified)
Year/Month/Date
e) DMC-GH1KGT
NTSC
Chinese (traditional)
Year/Month/Date
15
4 Specifications
16
5 Location of Controls and Components
Names of the Components
Camera body
1
Flash
2
Sensor
3
Self-timer indicator
AF assist lamp
AF assist lamp
4
Lens release button
5
Lens lock pin
6
Mount
7
Lens fitting mark
8
Front dial
9
[LVF/LCD] button
10 Diopter adjustment dial
11
11
Viewfinder
12 Eye sensor
13 Playback button
14 [AF/AE LOCK] button
15 Camera ON/OFF switch
16 Motion picture button
17 Eye Cup
18 LCD monitor
19 [DISPLAY] button
20 Delete button/
13 Playback button
14 [AF/AE LOCK] button
15 Camera ON/OFF switch
16 Motion picture button
17 Eye Cup
18 LCD monitor
19 [DISPLAY] button
20 Delete button/
Preview button
21 [MENU/SET] button
22 Cursor buttons
22 Cursor buttons
/ISO
/AF mode
/Function button
Assign Menu to
/AF mode
/Function button
Assign Menu to
button. It is convenient to register Menu that is used often.
[ASPECT RATIO]/[QUALITY]/[METERING MODE]/[I.EXPOSURE]/[GUIDE LINE]/
[
[
REC AREA]/[REMAINING DISP.]
/WB (White balance)
2
3
7 6
5
4
1
8
11
13
18 19
9 10
12
14 15
22
16
17
20
21
Click on the first or last page to see other DMC-GH1KPP / DMC-GH1KEB / DMC-GH1KEC / DMC-GH1KEG / DMC-GH1KGC / DMC-GH1KGH / DMC-GH1KGK / DMC-GH1KGN / DMC-GH1KGT / DMC-GH1KGC9K service manuals if exist.