Panasonic DMC-FZ8P / DMC-FZ8PC / DMC-FZ8PL / DMC-FZ8EB / DMC-FZ8EE / DMC-FZ8EF / DMC-FZ8EG / DMC-FZ8EGM / DMC-FZ8GC / DMC-FZ8GD / DMC-FZ8GK / DMC-FZ8GN / DMC-FZ8GT / DMC-FZ8SG Service Manual ▷ View online
25
• This unit equipped with two pieces of capacitors as flash
charging capacitors.
“Either one of the capacitor discharging operation” makes
discharging for others as well.
“Either one of the capacitor discharging operation” makes
discharging for others as well.
Fig. D4
8.3.3.
Removal of the LCD Unit
Fig. D5
8.3.4.
Removal of the Speaker
Fig. D6
26
8.3.5.
Removal of the Jack Door Unit
Fig. D7
8.3.6.
Removal of the AF LED/Mic P.C.B.
Fig. D8
8.3.7.
Removal of the Top Operation Unit
Fig. D9
8.3.8.
Removal of the Flash Unit & EVF
Unit
Unit
Fig. D10
8.3.9.
Removal of the Lens Unit
Fig. D11
NOTE: (When Assembling)
Be sure to confirm the following points when assembling.
• The Screw is tightened enough.
• Assembling conditions are fine. (No distortion, no illegal-
• Assembling conditions are fine. (No distortion, no illegal-
space.)
• No dust and/or dirt on every Lens surfaces.
• LCD image is fine. (No dust and dirt on it, and no gradient
• LCD image is fine. (No dust and dirt on it, and no gradient
images.)
27
8.4.
Disassembly/Assembly Proce-
dure for the Lens
dure for the Lens
NOTE: When Disassembling and Assembling for the Lens
1. To minimize the possibility of the CCD being dirt, perform
disassemble and/or assemble under the condition of the
CCD is being mounted.
Disassembling procedures for the CCD unit, refer to item
8.5.
CCD is being mounted.
Disassembling procedures for the CCD unit, refer to item
8.5.
2. Take care that the dust and dirt are not entered into the
lens.
In case of the dust is putted on the lens, blow off them by
airbrush.
In case of the dust is putted on the lens, blow off them by
airbrush.
3. Do not touch the surface of lens.
4. Use lens cleaning KIT (BK)(VFK1900BK).
5. Apply the grease (VFK1829) to the point where is shown
4. Use lens cleaning KIT (BK)(VFK1900BK).
5. Apply the grease (VFK1829) to the point where is shown
to" Grease apply" in the figure.
When the grease is applied, use a toothpick and apply
thinly.
When the grease is applied, use a toothpick and apply
thinly.
8.4.1.
Removal of the Zoom Motor Unit
8.4.2.
Removal of the 3rd Lens Frame/ 4th
Lens Frame/Drive Frame Unit
Lens Frame/Drive Frame Unit
28
8.4.3.
Removal of the Master Flange Unit
8.4.4.
Removal of the Cam Frame
Click on the first or last page to see other DMC-FZ8P / DMC-FZ8PC / DMC-FZ8PL / DMC-FZ8EB / DMC-FZ8EE / DMC-FZ8EF / DMC-FZ8EG / DMC-FZ8EGM / DMC-FZ8GC / DMC-FZ8GD / DMC-FZ8GK / DMC-FZ8GN / DMC-FZ8GT / DMC-FZ8SG service manuals if exist.