Panasonic DMC-FZ150EE / DMC-FZ150EEK Service Manual ▷ View online
33
(Fig. D21)
8.3.13. Removal of the LCD Unit
(Fig. D22)
NOTE: (When Installing)
Make sure to confirm the following points when installing:
• The screw is tightened enough.
• Installing conditions are fine. (No distortion, no abnormal-
• Installing conditions are fine. (No distortion, no abnormal-
space.)
• No dust and/or dirt on Lens surfaces.
• LCD image is fine. (No dust and dirt on it, and no gradient
• LCD image is fine. (No dust and dirt on it, and no gradient
images.)
34
8.4.
Lens Disassembly Procedure
Precaution:
1. Do not remove the MOS SENSOR unit when disassem-
bling or re-assembling the lens in order to maintain it
clean.
The screws for fixing the MOS SENSOR unit to the mas-
ter flange unit are locked by glue with the adjustment of
the installation angle of the MOS SENSOR unit to the
lens (optical axis adjustment) finished.
When remove it, refer to item "8.5.".
clean.
The screws for fixing the MOS SENSOR unit to the mas-
ter flange unit are locked by glue with the adjustment of
the installation angle of the MOS SENSOR unit to the
lens (optical axis adjustment) finished.
When remove it, refer to item "8.5.".
2. Keep dust or dirt away from the lens.
To remove dirt or dust from the lens, blow with dry air.
3. Do not touch the lens surface.
4. Use lens cleaning KIT (VFK1900BK).
5. Apply grease as shown on item "8.4.5" and "8.4.6" in the
4. Use lens cleaning KIT (VFK1900BK).
5. Apply grease as shown on item "8.4.5" and "8.4.6" in the
figure.
8.4.1.
Removal of the Zoom Motor Unit
1. Remove the 8 solders.
2. Remove the 2 Ribs.
3. Unscrew the 2 screws (A).
4. Remove the zoom motor unit.
2. Remove the 2 Ribs.
3. Unscrew the 2 screws (A).
4. Remove the zoom motor unit.
8.4.2.
Removal of the 1st Lens Frame Unit
and 2nd Lens Frame Unit
and 2nd Lens Frame Unit
1. Unscrew the 1 screw (B).
2. Remove the cam stopper.
2. Remove the cam stopper.
35
3. Turn the cam frame unit or gear part of cam frame unit in
the direction of arrow fully.
4. Remove the 1st lens frame unit and 2nd lens frame unit.
36
8.4.3.
Removal of the Master Flange Unit
1. Remove the 1 rib.
2. Remove the flex from the connector.
3. Remove the 4 solders.
4. Unscrew the 3 screws (C).
5. Remove the master flange unit in the direction of arrow.
2. Remove the flex from the connector.
3. Remove the 4 solders.
4. Unscrew the 3 screws (C).
5. Remove the master flange unit in the direction of arrow.
Click on the first or last page to see other DMC-FZ150EE / DMC-FZ150EEK service manuals if exist.