Panasonic DMC-FZ150EE / DMC-FZ150EEK Service Manual ▷ View online
21
7 Service Fixture & Tools
7.1.
Service Fixture and Tools
The following Service Fixture and tools are used for checking and servicing this unit.
22
7.2.
When Replacing the Main P.C.B.
After replacing the MAIN P.C.B., be sure to achieve adjustment.
The service software is available at “TSN Website”. To download, click on “Support Information from NWBG/VDBG-AVC”.
The service software is available at “TSN Website”. To download, click on “Support Information from NWBG/VDBG-AVC”.
7.3.
Service Position
This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
Table S1 Extension Cable List
CAUTION-1. (When servicing FLASH P.C.B.)
1. Be sure to discharge the E.capacitor on FLASH P.C.B..
Refer to “HOW TO DISCHARGE THE E.CAPACITOR ON FLASH P.C.B.”.
The E.capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
The E.capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on FLASH P.C.B..
3. DO NOT allow other parts to touch the high voltage circuit on FLASH P.C.B..
3. DO NOT allow other parts to touch the high voltage circuit on FLASH P.C.B..
No.
Parts No.
Connection
Form
1
VFK1906
PS9001 (MAIN) - PP8001 (FLASH)
20PIN B to B
2
VFK1953
FP9005 (MAIN) - LENS UNIT
40PIN 0.5 FFC
23
8 Disassembly and Assembly Instructions
8.1.
Disassembly Flow Chart
This is a disassembling chart.
When assembling, perform this chart conversely.
When assembling, perform this chart conversely.
8.2.
P.C.B. Location
24
8.3.
Disassembly Procedure
No.
Item
Fig
Removal
1
Rear Case Unit
(Fig. D1)
Card
Battery
3 Screws (A)
2 Screws (B)
1 Locking tab
Battery
3 Screws (A)
2 Screws (B)
1 Locking tab
(Fig. D2)
Shoe Spring
2 Screws (C)
FP9003(Flex)
Rear Case Unit
2 Screws (C)
FP9003(Flex)
Rear Case Unit
2
Main P.C.B.
(Fig. D3)
1 Screw (D)
2 Screws (E)
FP9001(Flex)
FP9002(Flex)
FP9004(Flex)
FP9005(Flex)
FP9006(Flex)
FP9008(Flex)
FP9010(Flex)
P9001(Connector)
P9005(Connector)
2 Screws (E)
FP9001(Flex)
FP9002(Flex)
FP9004(Flex)
FP9005(Flex)
FP9006(Flex)
FP9008(Flex)
FP9010(Flex)
P9001(Connector)
P9005(Connector)
(Fig. D4)
PS9001(Connector)
Jack Holder
Main P.C.B.
Jack Holder
Main P.C.B.
3
Top Case Unit
(Fig. D5)
1 Screw (F)
Top Case Unit
Top Case Unit
4
Battery Case Unit
(Fig. D6)
1 Screw (G)
(Fig. D7)
P8003(Connector)
P8004(Connector)
1 Locking tab
Battery Case Unit
P8004(Connector)
1 Locking tab
Battery Case Unit
5
EVF Unit &
Flash Unit
Flash Unit
(Fig. D8)
1 Screw (H)
EVF Unit & Flash Unit
EVF Unit & Flash Unit
6
Lens Unit (W/MOS)
(Fig. D9)
2 Screws (I)
Lens Heat Sink
Lens Unit (W/MOS)
Lens Heat Sink
Lens Unit (W/MOS)
7
Speaker
Mic Jack FPC
Mic Jack FPC
(Fig. D10) 1 Screw (J)
Strap Holder
1 Locking tab
Side Frame (R)
Jack Cover
Speaker
1 Screw (K)
Connector (A)
1 Locking tab
Side Frame (R)
Jack Cover
Speaker
1 Screw (K)
Connector (A)
(Fig. D11) Remote Holder
Remote Cover
Mic Jack FPC
Mic Jack FPC
8
Side Operation Unit
(Fig. D12) 4 Locking tabs
Side Operation Support
Switch Unit
Side Operation Unit
Switch Unit
Side Operation Unit
9
Flash P.C.B.
(Fig. D13) 3 Locking tabs
Capacitor Cover
(Fig. D14) 1 Screw (L)
2 Hanging parts
Flash P.C.B.
Flash P.C.B.
10
EVF Unit
(Fig. D15) 2 Locking tabs
EVF Unit
11
Hot Shoe Unit
Flash Unit
ECM Flex Unit
Flash Unit
ECM Flex Unit
(Fig. D16) 3 Screws (M)
2 Ribs
Hot Shoe Unit
2 Screws (N)
Hot Shoe Unit
2 Screws (N)
(Fig. D17) 4 Locking tabs
Flash Case Top Unit
Flash Shaft
Flash Pop Up Spring
Flash Shaft
Flash Pop Up Spring
(Fig. D18) 2 Locking tabs
1 Locking tab
Flash Earth Plate
2 Hooking parts
MIC Damper
ECM Flex Unit
MIC Cushion
Flash Unit
Flash Earth Plate
2 Hooking parts
MIC Damper
ECM Flex Unit
MIC Cushion
Flash Unit
12
LCD Unit
Hinge SW FPC
Hinge SW FPC
(Fig. D19) 2 Screws (O)
(Fig. D20) 1 Locking tab
(Fig. D20) 1 Locking tab
Hinge Arm Cover Top
1 Locking tab
Hinge Arm Cover Bottom
2 Screws (P)
Hinge Plate
FP7301(Flex)
3 Ribs
1 Locking tab
Hinge Arm Cover Bottom
2 Screws (P)
Hinge Plate
FP7301(Flex)
3 Ribs
(Fig. D21) LCD Unit
DPR Sheet
2 Locking tabs
Rear Earth Plate B
2 Locking tabs
Hinge SW FPC
2 Locking tabs
Rear Earth Plate B
2 Locking tabs
Hinge SW FPC
13
LCD Unit
(Fig. D22) 2 Screws (Q)
2 Screws (R)
6 Locking tabs
LCD Case (Top)
Connector (B)
LCD Hinge Unit
LCD Unit
LCD Case (Bottom)
6 Locking tabs
LCD Case (Top)
Connector (B)
LCD Hinge Unit
LCD Unit
LCD Case (Bottom)
No.
Item
Fig
Removal
Click on the first or last page to see other DMC-FZ150EE / DMC-FZ150EEK service manuals if exist.