Panasonic DMC-FX77EB / DMC-FX77EE / DMC-FX77EF / DMC-FX77EG / DMC-FX77EP / DMC-FX77SG / DMC-FX78P / DMC-FX78PU / DMC-FX78GC / DMC-FX78GD / DMC-FX78GH / DMC-FX78GK / DMC-FX78GN / DMC-FX78GT Service Manual ▷ View online
29
8.3.9.
Removal of the Jack Door
(Fig. D11)
8.3.10.
Removal of the Battery Door Unit
(Fig. D12)
NOTE: (When Installing)
Make sure to confirm the following points when installing:
• The Screw is tightened enough.
• Installing conditions are fine. (No distortion, no abnormal-
• Installing conditions are fine. (No distortion, no abnormal-
space.)
• No dust and/or dirt on Lens surfaces.
• LCD image is fine. (No dust and dirt on it, and no gradient
• LCD image is fine. (No dust and dirt on it, and no gradient
images.)
8.4.
Lens Disassembly Procedure
Precaution:
1. Do not remove the CCD unit when disassembling or re-
assembling the lens in order to maintain it clean.
The screw fitting the CCD unit to the master flange unit is
fixed by the bond lock with the adjustment of the installa-
tion angle of the CCD unit against the lens (optical axis
adjustment) finished.
When remove it, refer to item "8.7.".
The screw fitting the CCD unit to the master flange unit is
fixed by the bond lock with the adjustment of the installa-
tion angle of the CCD unit against the lens (optical axis
adjustment) finished.
When remove it, refer to item "8.7.".
2. Keep dust or dirt away from the lens.
To remove dirt or dust from the lens, blow with dry air.
3. Do not touch the lens surface.
4. Use lens cleaning KIT (VFK1900BK).
5. Apply grease (RFKZ0472) as shown on "THE APPLICA-
4. Use lens cleaning KIT (VFK1900BK).
5. Apply grease (RFKZ0472) as shown on "THE APPLICA-
TION OF GREASE METHOD" in the figure.
30
8.4.1.
Removal of the Zoom Motor
1. Unscrew the 2 screws (A).
2. Remove the Connector.
3. Remove the FPC to the hanging part.
2. Remove the Connector.
3. Remove the FPC to the hanging part.
8.4.2.
Removal of the Lens FPC P.C.B.
Unit
Unit
1. Unscrew the 1 screw (B).
2. Remove the Connector.
3. Unsolder (4 points).
4. Remove the 5 Locks.
5. Remove the Lens FPC P.C.B. Unit to the hanging part.
2. Remove the Connector.
3. Unsolder (4 points).
4. Remove the 5 Locks.
5. Remove the Lens FPC P.C.B. Unit to the hanging part.
31
8.4.3.
Removal of the Master Flange Unit
1. Unscrew the 5 screws (C).
2. Remove the master flange unit.
2. Remove the master flange unit.
8.4.4.
Removal of the 2nd Lens Frame
Move Unit/2nd Lens Frame Unit/1st
Lens Frame Move Unit/1st Lens
Frame Unit and Cam Frame Unit
Move Unit/2nd Lens Frame Unit/1st
Lens Frame Move Unit/1st Lens
Frame Unit and Cam Frame Unit
1. Push the 1st lens frame unit from the lens front side in the
direction of arrow, and then remove the unit of 2nd lens
frame move unit/2nd lens frame unit/1st lens frame move
unit/1st lens frame unit and cam frame unit from fixed
frame unit.
frame move unit/2nd lens frame unit/1st lens frame move
unit/1st lens frame unit and cam frame unit from fixed
frame unit.
32
8.4.5.
Removal of the 2nd Lens Frame
Move Unit
Move Unit
1. Remove the 2nd Lens frame move unit in the direction of
the arrow.
8.4.6.
Removal of the 2nd Lens Frame
Unit
Unit
1. Remove the 2nd Lens frame unit in the direction of the
arrow (1) and (2).
8.4.7.
Removal of the 1st Lens Frame
Move Unit
Move Unit
1. Slide the 1st Lens frame move unit in the direction of the
arrow (1).
2. Remove the 1st Lens frame move unit in the direction of
the arrow (2).
Click on the first or last page to see other DMC-FX77EB / DMC-FX77EE / DMC-FX77EF / DMC-FX77EG / DMC-FX77EP / DMC-FX77SG / DMC-FX78P / DMC-FX78PU / DMC-FX78GC / DMC-FX78GD / DMC-FX78GH / DMC-FX78GK / DMC-FX78GN / DMC-FX78GT service manuals if exist.