DOWNLOAD Panasonic DMC-FX50PP / DMC-FX50PL / DMC-FX50EB / DMC-FX50EE / DMC-FX50EF / DMC-FX50EG / DMC-FX50EGM / DMC-FX50GC / DMC-FX50GD / DMC-FX50GK / DMC-FX50GN / DMC-FX50GT / DMC-FX50SG Service Manual ↓ Size: 2.74 MB | Pages: 50 in PDF or view online for FREE

29

To prevent the CCD unit from catching the dust and dirt, do not
remove the CCD unit except for replacing.

The grease apply point of lens unit are as follows.
Apply grease additionally in the specified position if necessary.

• Lead screw

- Grease: VFK1850 (Furoyl type)
- Amount of apply: 2 - 4 mg

• Guide pole

- Grease: VFK1829
- Amount of apply: 2 - 4 mg

30

The relation between Replaced part and Necessary Adjustment is shown in the following table.
When concerned part is replaced, be sure to achieve the necessary adjustment(s).
As for Adjustment condition/procedure, consult the “Adjustment Manual” which is available in Adjustment software.
The Adjustment software is available at “TSN Website”, therefore, access to “TSN Website” at “Support Information from NWBG/
VDBG-PAVC”.
NOTE:

After adjustments have been terminated, make sure to achieve “INITIAL SETTINGS”.

*There is no LCD adjustment in this model.
*There is no CCD Black scratch compensation adjustment (BKI) in this model.

Replaced Part

Adjustment Item

Main P.C.B.

VENUS 

(IC6001)

Flash-ROM 

(IC6002)

Lens Part 

(Excluding 

CCD)

CCD Unit

Camera 
Section

OIS hall element adjustment
(OIS)

O

O

O

O

Back focus adjustment
(BF)

O

O

O

O

Shutter adjustment
(SHT)

O

O

O

O

O

ISO sensitivity adjustment
(ISO)

O

O

O

O

O

AWB adjustment
High brightness coloration inspection
(WBL)

O

O

O

O

O

CCD white scratch compensation
(WKI)

O

O

O

O

31

Do not touch the surface of lens and LCD Panel with your hand.
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the their surface.
Note:

The Lens Cleaning KIT ; VFK1900BK (Only supplied as 10 set/Box) is available as Service Aid.

S-1

S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1

S2. Voltage Chart ........................................................................... S-2
S2.1. Flash Top P.C.B. .................................................................... S-2

S3. Block Diagram .......................................................................... S-3
S3.1. Overall Block Diagram .......................................................... S-3

S4. Schematic Diagram .................................................................. S-4
S4.1. Interconnection Diagram ....................................................... S-4
S4.2. Flash Top Schematic Diagram .............................................. S-5
S4.3. AF Assist LED Schematic Diagram ....................................... S-6
S4.4. CCD Flex Schematic Diagram .............................................. S-6
S4.5. Lens Flex Schematic Diagram .............................................. S-7

S5. Print Circuit Board .................................................................... S-8
S5.1. Flash Top P.C.B. .................................................................... S-8
S5.2. AF Assist LED P.C.B. ............................................................ S-9
S5.3. CCD Flex P.C.B. .................................................................... S-9
S5.4. Lens Flex P.C.B. .................................................................. S-10

S6. Replacement Parts List .......................................................... S-11

S7. Exploded View ....................................................................... S-17
S7.1. Frame and Casing Section.................................................. S-17
S7.2. Packing Parts and Accessories Section (1) ........................ S-18
S7.3. Packing Parts and Accessories Section (2) ........................ S-19

Table of contents

Vol. 1

Colour

(S)...........Silver Type
(K)...........Black Type (except PL/GD)
(P)...........Pink Type (only GC/SG)

Digital Camera

DSC0608025CE

DMC-FX50PP
DMC-FX50PL
DMC-FX50EB
DMC-FX50EE
DMC-FX50EF
DMC-FX50EG
DMC-FX50EGM

DMC-FX50GC
DMC-FX50GD
DMC-FX50GK
DMC-FX50GN
DMC-FX50GT
DMC-FX50SG

Name of Signal

OFTR

FEP

This signal is connected
to the FEP schematic diagram.

Circuit name being connected.

6.Use the parts number indicated on the Replacement Parts List .

7.Indication on Schematic diagrams:

5.The voltage being indicated here may be include observational-error (deviation) due to

internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.

4.Although the voltage and waveform available on here is measured with standard frame,

it may be differ from actual measurement due to modification of circuit and so on.

3.The voltage being indicated on the schematic diagram is measured in

"Standard-Playback" mode when there is no specify mode is mentioned.

2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.

when the TP (Test Point) indicated as "

" mark.

1.Although reference number of the parts is indicated on the P.C.B. drawing and/or

schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.

FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.

COMPONENTS IDENTIFIED WITH THE MARK

HAVE THE SPECIAL CHARACTERISTICS