Panasonic DMC-FT3EB / DMC-FT3EE / DMC-FT3EF / DMC-FT3EG / DMC-FT3EP / DMC-FT3GC / DMC-FT3GN / DMC-FT3SG / DMC-TS3P / DMC-TS3PC / DMC-TS3PU / DMC-TS3GH / DMC-TS3GD / DMC-TS3GT Service Manual ▷ View online
13
3.8.2.
INITIAL SETTINGS:
After replacing the MAIN P.C.B., be sure to perform the initial settings after achieving the adjustment by ordering the following pro-
cedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
cedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
Before proceeding Initial settings, be sure to read the following CAUTIONS.
2. PROCEDURES:
• Precautions: Read the above "CAUTION 1" and "CAUTION 2", carefully
• Preparation:
• Preparation:
1. Attach the Battery or AC Adaptor with a DC coupler to the unit.
2. Set the mode dial to the NORMAL PICTURE mode.
2. Set the mode dial to the NORMAL PICTURE mode.
Note:
If the mode dial position is other than NORMAL PICTURE mode, it does not display the initial settings menu.
• Step 1. The temporary cancellation of "INITIAL SETTINGS":
While keep pressing "UP of Cursor button" and MOTION PICTURE button simultaneously, turn the Power on.
• Step 2. The cancellation of "INITIAL SETTINGS":
Press the PLAYBACK button.
Press "UP of Cursor button" and MOTION PICTURE button simultaneously, then turn the Power off.
Press "UP of Cursor button" and MOTION PICTURE button simultaneously, then turn the Power off.
• Step 3. Turn the Power on:
Turn the Power on.
• Step 4. Display the "INITIAL SETTINGS" menu:
Note:
If the unit is other than NORMAL PICTURE mode, it does not display the initial settings menu.
While keep pressing MENU/SET and "RIGHT of Cursor button" simultaneously, turn the Power off.
The "INITIAL SETTINGS" menu is displayed.
There are two kinds of "NITIAL SETTINGS" menu form as follows:
[CASE 1. After replacing MAIN P.C.B.]
[Except "EG, EF, EB and EP" models : (VEP56129A is used as a Main P.C.B.)]
When MAIN P.C.B. has just been replaced, the following model suffix list is displayed as follows. (Four pages in total)
The "INITIAL SETTINGS" menu is displayed.
There are two kinds of "NITIAL SETTINGS" menu form as follows:
[CASE 1. After replacing MAIN P.C.B.]
[Except "EG, EF, EB and EP" models : (VEP56129A is used as a Main P.C.B.)]
When MAIN P.C.B. has just been replaced, the following model suffix list is displayed as follows. (Four pages in total)
14
[Only for "EG, EF, EB and EP" models : (VEP56129B is used as a Main P.C.B.)]
When MAIN P.C.B. has just been replaced, the following model suffix list is displayed as follows. (Two pages in total)
When MAIN P.C.B. has just been replaced, the following model suffix list is displayed as follows. (Two pages in total)
[CASE 2. Other than "After replacing MAIN P.C.B."]
• Step 5. Chose the model suffix in "INITIAL SETTINGS": (Refer to "CAUTION 1")
[Caution: After replacing MAIN P.C.B.]
(Especially, other than "EG, EF, EB and EP" models : (VEP56129B is used as a Main P.C.B.))
The model suffix can be chosen, JUST ONE TIME.
Once one of the model suffix have been chosen, the model suffix lists will not be displayed, thus, it can be changed.
Therefore, select the area carefully.
Select the area with pressing "UP / DOWN of Cursor buttons".
The model suffix can be chosen, JUST ONE TIME.
Once one of the model suffix have been chosen, the model suffix lists will not be displayed, thus, it can be changed.
Therefore, select the area carefully.
Select the area with pressing "UP / DOWN of Cursor buttons".
• Step 6. Set the model suffix at "INITIAL SETTINGS":
Press the "RIGHT of Cursor buttons".
The only set area is displayed. Press the "RIGHT of Cursor buttons" after confirmation.
(The unit is powered off automatically.)
The only set area is displayed. Press the "RIGHT of Cursor buttons" after confirmation.
(The unit is powered off automatically.)
15
• Step 7. CONFIRMATION:
Confirm the display of "PLEASE SET THE CLOCK" in concerned language when the unit is turned on again.
When the unit is connected to PC with USB cable, it is detected as removable media.
1) As for your reference, major default setting condition is as shown in the following table.
Default setting (After "INITIAL SETTINGS")
When the unit is connected to PC with USB cable, it is detected as removable media.
1) As for your reference, major default setting condition is as shown in the following table.
Default setting (After "INITIAL SETTINGS")
MODEL
VIDEO OUTPUT
LANGUAGE
DATE
REMARKS
a)
DMC-FT3(Japan domestic model)
NTSC
Japanese
Year/Month/Date
b)
DMC-FT3EB
PAL
English
Date/Month/Year
c)
DMC-FT3EE
PAL
Russian
Date/Month/Year
d)
DMC-FT3EF
PAL
French
Date/Month/Year
e)
DMC-FT3EG
PAL
English
Date/Month/Year
f)
DMC-FT3EP
PAL
English
Date/Month/Year
g)
DMC-FT3GC
PAL
English
Date/Month/Year
h)
DMC-FT3GN
PAL
English
Date/Month/Year
i)
DMC-FT3SG
PAL
English
Date/Month/Year
j)
DMC-TS3GH
PAL
English
Date/Month/Year
k)
DMC-TS3GD
NTSC
Korean
Year/Month/Date
l)
DMC-TS3GT
NTSC
Chinese (Traditional)
Year/Month/Date
m)
DMC-TS3P
NTSC
English
Date/Month/Year
n)
DMC-TS3PC
NTSC
English
Date/Month/Year
o)
DMC-TS3PU
NTSC
Spanish
Date/Month/Year
16
4 Specifications
Click on the first or last page to see other DMC-FT3EB / DMC-FT3EE / DMC-FT3EF / DMC-FT3EG / DMC-FT3EP / DMC-FT3GC / DMC-FT3GN / DMC-FT3SG / DMC-TS3P / DMC-TS3PC / DMC-TS3PU / DMC-TS3GH / DMC-TS3GD / DMC-TS3GT service manuals if exist.