Panasonic DMC-FT1EB / DMC-FT1EE / DMC-FT1EF / DMC-FT1EG / DMC-FT1EP / DMC-FT1GC / DMC-FT1GJ / DMC-FT1GN / DMC-FT1SG / DMC-TS1P / DMC-TS1PC / DMC-TS1PU / DMC-TS1GH / DMC-TS1GK / DMC-TS1GT Service Manual ▷ View online
49
11 Maintenance
11.1. Cleaning Lens and LCD Panel
Do not touch the surface of lens and LCD Panel with your hand.
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the their surface.
Note:
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the their surface.
Note:
The Lens Cleaning KIT ; VFK1900BK(Only supplied as 10 set/Box) is available as Service Aid.
Table of contents
Service Manual
DSC0903016CE
Diagrams and Replacement
Parts List
Vol. 1
(S)...........Silver Type (except EF/GT)
Colour
(A)...........Blue Type (only EB/EF/EG/EP/GC/GN/PC/PU)
(D)...........Orange Type (except EB)
(G)...........Green Type (except EB)
(D)...........Orange Type (except EB)
(G)...........Green Type (except EB)
Model No.
DMC-FT1EB
DMC-FT1EE
DMC-FT1EF
DMC-FT1EG
DMC-FT1EP
DMC-FT1GC
DMC-FT1GJ
DMC-FT1GN
DMC-FT1EB
DMC-FT1EE
DMC-FT1EF
DMC-FT1EG
DMC-FT1EP
DMC-FT1GC
DMC-FT1GJ
DMC-FT1GN
DMC-FT1SG
DMC-TS1GH
DMC-TS1GK
DMC-TS1GT
DMC-TS1P
DMC-TS1PC
DMC-TS1PU
DMC-TS1GH
DMC-TS1GK
DMC-TS1GT
DMC-TS1P
DMC-TS1PC
DMC-TS1PU
Digital Camera
Name of Signal
OFTR
FEP
This signal is connected
to the FEP schematic diagram.
to the FEP schematic diagram.
Circuit name being connected.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
indicated on here as reference.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as " " mark.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
COMPONENTS IDENTIFIED WITH THE MARK
HAVE THE SPECIAL CHARACTERISTICS
S-1
S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Voltage Chart ........................................................................... S-2
S2.1. Flash P.C.B. .......................................................................... S-2
S2.1. Flash P.C.B. .......................................................................... S-2
S3. Block Diagram .......................................................................... S-3
S3.1. Overall Block Diagram .......................................................... S-3
S3.1. Overall Block Diagram .......................................................... S-3
S4. Schematic Diagram .................................................................. S-4
S4.1. Interconnection Diagram ....................................................... S-4
S4.2. Flash Schematic Diagram ..................................................... S-5
S4.3. Top Operation Schematic Diagram ....................................... S-6
S4.4. Rear Operation Schematic Diagram ..................................... S-7
S4.1. Interconnection Diagram ....................................................... S-4
S4.2. Flash Schematic Diagram ..................................................... S-5
S4.3. Top Operation Schematic Diagram ....................................... S-6
S4.4. Rear Operation Schematic Diagram ..................................... S-7
S5. Print Circuit Board .................................................................... S-8
S5.1. Flash P.C.B. .......................................................................... S-8
S5.2. Top Operation P.C.B. ............................................................. S-9
S5.3. Rear Operation P.C.B. ......................................................... S-10
S5.1. Flash P.C.B. .......................................................................... S-8
S5.2. Top Operation P.C.B. ............................................................. S-9
S5.3. Rear Operation P.C.B. ......................................................... S-10
S6. Replacement Parts List .......................................................... S-11
S7. Exploded View ....................................................................... S-15
S7.1. Frame and Casing Section.................................................. S-15
S7.2. Packing Parts and Accessories Section .............................. S-16
S7.1. Frame and Casing Section.................................................. S-15
S7.2. Packing Parts and Accessories Section .............................. S-16
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice
S-2
S2. Voltage Chart
S2.1. Flash P.C.B.
Note) Indicated voltage values are the standard values for the unit measured by the DC electronic circuit tester (high-impedance) with the chassis taken as standard.
Therefore, there may exist some errors in the voltage values, depending on the internal impedance of the DC circuit tester.
REF No.
PIN No.
POWER ON
IC8001
1
3
IC8001
2
0
IC8001
3
0
IC8001
4
0
IC8001
5
3.3
Q8001
1
5.1
Q8001
2
5.1
Q8001
3
0
Q8001
4
0
Q8001
5
5.1
Q8001
6
5.1
S-3
S3. Block Diagram
S3.1. Overall Block Diagram
CCD
IC3001
FOCUS
IRIS
/512Mbit
IC6002
SDRAM/512Mbit
SD
CARD
CARD
IC5001
AUDIO INTERFACE
IC9601
MONAURAL 16bit CODEC
MICROPHONE
(SWITCHING REGULATOR)
REAR OPERATION UNIT
IC9101
IC9101
OIS DRIVE &
IC6001
VENUS 4
STROBE
IC1001
POWER
SHUTTER
IC9101
ZOOM
1/2.33" 12.1 MEGA PIX
TERMINAL
COLOUR LCD
2.7" PANEL
SPEAKER
MICROPHONE ANT
HDMI
JK2004
VIDEO AUDIO L/R
USB/DC
IC7101
GYRO
SENSOR X/Y
DMC-FT1, TS1 OVERALL BLOCK DIAGRAM
MONAURAL MIC AMP
MONAURAL LINE AMP
SPEAKER AMP
230K PIX
(Type of LCD Driver inclusion)
(4.9mm - 22.8mm
OISUNIT
PREPROCESS
CDS,AGC,
A/D,TG,
CCD DRIVER
A/D,TG,
CCD DRIVER
MOTOR DRIVE,
PRE PROCESS
SYSTEM
DRIVER
CAMERA PROCESS
J-PEG COMP/EX PANDS
MEDIA I/F
USB I/F
MAIN MICRO PROCESSOR
OIS CONTROL
LENS DRIVE
LCD DRIVE
J-PEG COMP/EX PANDS
MEDIA I/F
USB I/F
MAIN MICRO PROCESSOR
OIS CONTROL
LENS DRIVE
LCD DRIVE
FLASH ROM
HDMI CONTROLER
SYSTEM DRIVER
(VIDEO 6dB AMP)
AV/USB/DC
JK2001
PANEL
BATTERY
TOP OPERATION UNIT
Click on the first or last page to see other DMC-FT1EB / DMC-FT1EE / DMC-FT1EF / DMC-FT1EG / DMC-FT1EP / DMC-FT1GC / DMC-FT1GJ / DMC-FT1GN / DMC-FT1SG / DMC-TS1P / DMC-TS1PC / DMC-TS1PU / DMC-TS1GH / DMC-TS1GK / DMC-TS1GT service manuals if exist.