Panasonic DMC-FS33EB / DMC-FS33EE / DMC-FS33EF / DMC-FS33EG / DMC-FS33EP / DMC-FH22P / DMC-FH22PC / DMC-FH22PU / DMC-FH22GC / DMC-FH22GF / DMC-FH22GK / DMC-FH22GN Service Manual ▷ View online
9
3.4.
How to Define the Model Suffix (NTSC or PAL model)
There are six kinds of DMC-FS33/FH22, regardless of the colours.
• a) DMC-FH22P/PC
• b) DMC-FS33EB/EF/EG/EP
• c) DMC-FS33EE
• d) DMC-FH22GK
• e) DMC-FH22GN
• f) DMC-FH22PU/GC/GF
• b) DMC-FS33EB/EF/EG/EP
• c) DMC-FS33EE
• d) DMC-FH22GK
• e) DMC-FH22GN
• f) DMC-FH22PU/GC/GF
What is the difference is that the “INITIAL SETTINGS” data which is stored in Flash-ROM mounted on MAIN P.C.B..
3.4.1.
Defining methods:
To define the model suffix to be serviced, refer to the nameplate which is putted on the bottom side of the Unit.
NOTE:
After replacing the MAIN P.C.B., be sure to achieve adjustment.
The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-AVC” web-site in
“TSN system”, together with Maintenance software.
The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-AVC” web-site in
“TSN system”, together with Maintenance software.
10
3.4.2.
INITIAL SETTINGS:
After replacing the MAIN P.C.B., be sure to perform the initial settings after achieving the adjustment by ordering the following pro-
cedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
cedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
Before proceeding Initial settings, be sure to read the following CAUTIONS.
2. PROCEDURES:
• Precautions: Read the above "CAUTION 1" and "CAUTION 2", carefully.
• Preparation:
• Preparation:
1. Attach the Battery or AC Adaptor with a DC coupler to the unit.
(Since this unit has built-in memory, it can be performed without inserting SD memory card.)
2. Set the recording mode to the [ NORMAL PICTURE ] mode.
(Press the [ MODE ] button and select the [ NORMAL PICTURE ] by touching the Touch Panel.)
NOTE:
NOTE:
If the unit is other than [ NORMAL PICTURE ] mode, it does not display the initial settings menu.
• Step 1. The temporary cancellation of “INITIAL SETTINGS”:
Set the [ REC ]/[ PLAYBACK ] selector switch to “[ REC ] (Camera mark)”.
While keep turning the Zoom Lever to [ Wide ] and pressing [ iA ] button simultaneously, turn the Power on.
While keep turning the Zoom Lever to [ Wide ] and pressing [ iA ] button simultaneously, turn the Power on.
• Step 2. The cancellation of “INITIAL SETTINGS”:
Set the [ REC ]/[ PLAYBACK ] selector switch to “[ PLAYBACK ]”.
Press the [ iA ] button and [ MODE ] button simultaneously, then turn the Power off.
Press the [ iA ] button and [ MODE ] button simultaneously, then turn the Power off.
• Step 3. Turn the Power on:
Set the [ REC ]/[ PLAYBACK ] selector switch to “[ REC ] (Camera mark)”, and then turn the Power on.
• Step 4. Display the INITIAL SETTING:
While keep turning the Zoom Lever to [ Tele ] and pressing [ MENU ] button simultaneously, turn the Power off.
The "INITIAL SETTINGS" menu is displayed.
There are two kinds of “INITIAL SETTINGS” menu form as follows:
The "INITIAL SETTINGS" menu is displayed.
There are two kinds of “INITIAL SETTINGS” menu form as follows:
11
[CASE 1. After replacing MAIN P.C.B.]
When MAIN P.C.B. has just been replaced, all of the model suffix is displayed as follows. (Eight pages in total)
When MAIN P.C.B. has just been replaced, all of the model suffix is displayed as follows. (Eight pages in total)
[CASE 2. Other than “After replacing MAIN P.C.B.”]
• Step 5. Choose the model suffix in “INITIAL SETTINGS”: (Refer to “CAUTION 1”)
[Caution: After replacing MAIN P.C.B.]
The model suffix can been chosen, JUST ONE TIME.
Once one of the model suffix have been chosen, the model suffix lists will not be displayed, thus, it can not be changed.
Therefore, select the area carefully.
Once one of the model suffix have been chosen, the model suffix lists will not be displayed, thus, it can not be changed.
Therefore, select the area carefully.
Select the page by [ UP ] / [ DOWN ] of Touch Panel or [ Wide ] / [ Tele ] of Zoom Lever, and then select the area by touching the
Touch Panel.
Touch Panel.
12
• Step 6. Set the model suffix in “INITIAL SETTINGS”:
• The only set area is displayed, and then select the [ END ] by touching the Touch Panel.
• The only set area is displayed, and then select the [ END ] by touching the Touch Panel.
(The unit is powered off automatically.)
• Step 7. CONFIRMATION:
Confirm the display of “PLEASE SET THE CLOCK” in concernd language when the unit is turned on again.
When the unit is connected to PC with USB cable, it is detected as removable media.
When the unit is connected to PC with USB cable, it is detected as removable media.
1) As for your reference, major default setting condition is as shown in the following table.
• Default setting (After “INITIAL SETTINGS”)
MODEL
VIDEO OUTPUT
LANGUAGE
DATE
REMARKS
a) DMC-FH22P
NTSC
English
Month/Date/Year
b) DMC-FS33EG
PAL
English
Date/Month/Year
c) DMC-FH22PU
NTSC
English
Month/Date/Year
d) DMC-FH22GC
PAL
English
Date/Month/Year
e) DMC-FH22GK
PAL
Chinese (simplified)
Year/Month/Date
f)
DMC-FS33EF
PAL
French
Date/Month/Year
g) DMC-FS33EB
PAL
English
Date/Month/Year
h) DMC-FS33EE
PAL
Russian
Date/Month/Year
i)
DMC-FH22GN
PAL
English
Date/Month/Year
j)
DMC-FH22PC
NTSC
English
Month/Date/Year
k) DMC-FS33EP
PAL
English
Date/Month/Year
l)
DMC-FH22GF
PAL
English
Date/Month/Year
Click on the first or last page to see other DMC-FS33EB / DMC-FS33EE / DMC-FS33EF / DMC-FS33EG / DMC-FS33EP / DMC-FH22P / DMC-FH22PC / DMC-FH22PU / DMC-FH22GC / DMC-FH22GF / DMC-FH22GK / DMC-FH22GN service manuals if exist.