Panasonic DMC-FS33EB / DMC-FS33EE / DMC-FS33EF / DMC-FS33EG / DMC-FS33EP / DMC-FH22P / DMC-FH22PC / DMC-FH22PU / DMC-FH22GC / DMC-FH22GF / DMC-FH22GK / DMC-FH22GN Service Manual ▷ View online
25
(Fig. D5)
8.3.4.
Removal of the Top Operation Unit
(Fig. D6)
8.3.5.
Removal of the Flash Top P.C.B.
(Fig. D7)
26
(Fig. D8)
8.3.6.
Removal of the Lens Unit
(Fig. D9)
8.3.7.
Removal of the Main P.C.B.
(Fig. D10)
27
8.3.8.
Removal of the Battery Case Unit
(Fig. D11)
8.3.9.
Removal of the Battery Door Unit
(Fig. D12)
NOTE: (When Installing)
Make sure to confirm the following points when installing:
• The Screw is tightened enough.
• Installing conditions are fine. (No distortion, no abnormal-
• Installing conditions are fine. (No distortion, no abnormal-
space.)
• No dust and/or dirt on Lens surfaces.
• LCD image is fine. (No dust and dirt on it, and no gradient
• LCD image is fine. (No dust and dirt on it, and no gradient
images.)
28
8.4.
Lens Disassembly Procedure
Precaution:
1. Do not remove the CCD when disassembling or re-
assembling the lens in order to maintain it clean.
When remove it, refer to item "8.6.".
When remove it, refer to item "8.6.".
2. Keep dust or dirt away from the lens.
3. To remove dirt or dust from the lens, blow with dry air.
4. Do not touch the lens surface.
5. Apply grease (RFKZ0472) as shown on "THE APPLICA-
3. To remove dirt or dust from the lens, blow with dry air.
4. Do not touch the lens surface.
5. Apply grease (RFKZ0472) as shown on "THE APPLICA-
TION OF GREASE METHOD" in the figure.
6. Apply a light coat of grease using an object similar to a
toothpick.
7. The drive frame unit and penetration cam frame should
be replaced as a unit.
8.4.1.
Removal of the Zoom Motor and
Lens FPC Unit
Lens FPC Unit
1. Remove the 4 tapes.
2. Unscrew the 2 screws (A).
3. Shift the zoom motor to the direction of arrow (1).
4. Unscrew the 1 screw (B).
5. Remove the photo sensor.
6. Remove the 13 solders (A).
7. Remove the 3 solders (B).
8. Remove the 5 locks.
2. Unscrew the 2 screws (A).
3. Shift the zoom motor to the direction of arrow (1).
4. Unscrew the 1 screw (B).
5. Remove the photo sensor.
6. Remove the 13 solders (A).
7. Remove the 3 solders (B).
8. Remove the 5 locks.
Click on the first or last page to see other DMC-FS33EB / DMC-FS33EE / DMC-FS33EF / DMC-FS33EG / DMC-FS33EP / DMC-FH22P / DMC-FH22PC / DMC-FH22PU / DMC-FH22GC / DMC-FH22GF / DMC-FH22GK / DMC-FH22GN service manuals if exist.