DOWNLOAD Panasonic DMC-FS22EE Service Manual ↓ Size: 3.18 MB | Pages: 59 in PDF or view online for FREE

37

38

Since the initial setting has been released to execute the built-in adjustment software, it should be set up again before shipping the
camera to the customer.
Refer to the procedure described in “3.5.2. INITIAL SETTINGS” for details.

1. The initial setting should be done again after completing the alignment. Otherwise, the camera will not work properly.

Therefore as a warning, the camera display a warning symbol “ ! ” on the LCD monitor every time the camera is turned off.

2. Confirm that status of all adjustment flag show “F”. Even if one of the adjustment flag shows “0”, initial setting programmed is

never executed.

3. Adjustment software “DIAS” is able to control the status of the adjustment flags.

The Adjustment software “DIAS” is available at “TSN Website”, therefore, access to “TSN Website” at “Support Information
from NWBG/VDBG-AVC”.

39

Do not touch the surface of lens and LCD Panel with your hand.
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the its surface.
Note:

The Lens Cleaning KIT ; VFK1900BK (Only supplied as 10 set/Box) is available as Service Aid.

S-1

S1. About Indication of The Schematic Diagram ............................ S-1

S1.1. Important Safety Notice......................................................... S-1

S2. Voltage Chart ........................................................................... S-2

S2.1. Flash P.C.B. .......................................................................... S-2

S3. Block Diagram .......................................................................... S-3

S3.1. Overall Block Diagram .......................................................... S-3

S3.2. Flash/Top Block Diagram ...................................................... S-4

S4. Schematic Diagram .................................................................. S-5

S4.1. Interconnection Diagram ....................................................... S-5

S4.2. Top Schematic Diagram ........................................................ S-6

S4.3. Flash Schematic Diagram ..................................................... S-7

S4.4. CCD Flex Schematic Diagram .............................................. S-8

S5. Print Circuit Board .................................................................... S-9

S5.1. Top P.C.B. ............................................................................. S-9

S5.2. Flash P.C.B. ........................................................................ S-10

S5.3. CCD Flex P.C.B. .................................................................. S-11

S6. Replacement Parts List .......................................................... S-13

S7. Exploded View ....................................................................... S-18

S7.1. Frame and Casing Section.................................................. S-18

S7.2. Packing Parts and Accessories Section (1) ........................ S-19

S7.3. Packing Parts and Accessories Section (2) ........................ S-20

Table of contents

DSC1106030CE

Vol. 1

Colour

(N)...........Gold Type (only GA/GC/GF/GH/GK/GT)

(P)...........Pink Type (except P/PC)

(S)...........Silver Type (except P/PC/GD/EF)

(K)...........Black Type

Model No.

DMC-FH7P

DMC-FH7PC

DMC-FH7PU

DMC-FH7GA

DMC-FH7GC

DMC-FH7GD

DMC-FH7GF

DMC-FH7GH

DMC-FH7GK

DMC-FH7GN

DMC-FH7GT

DMC-FS22EB

DMC-FS22EE

DMC-FS22EF

DMC-FS22EG

DMC-FS22EP

Digital Camera

Name of Signal

OFTR

FEP

This signal is connected

to the FEP schematic diagram.

Circuit name being connected.

6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:

5.The voltage being indicated here may be include observational-error (deviation) due to

internal-resistance and/or reactance of equipment. Therefore, handle the value

indicated on here as reference.

4.Although the voltage and waveform available on here is measured with standard frame,

it may be differ from actual measurement due to modification of circuit and so on.

3.The voltage being indicated on the schematic diagram is measured in

"Standard-Playback" mode when there is no specify mode is mentioned.

2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.

when the TP (Test Point) indicated as " " mark.

1.Although reference number of the parts is indicated on the P.C.B. drawing and/or

schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.

FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.

COMPONENTS IDENTIFIED WITH THE MARK

HAVE THE SPECIAL CHARACTERISTICS