Panasonic DMC-F2P / DMC-F2PC / DMC-F2PR / DMC-F2PU / DMC-F2EB / DMC-F2EE / DMC-F2EF / DMC-F2EG / DMC-F2EP / DMC-F2GC / DMC-F2GF / DMC-F2GN Service Manual ▷ View online
33
10 Maintenance
10.1. Cleaning Lens and LCD Panel
Do not touch the surface of lens and LCD Panel with your hand.
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the their surface.
Note:
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the their surface.
Note:
The Lens Cleaning KIT ; VFK1900BK (Only supplied as 10 set/Box) is available as Service Aid.
S-1
S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Voltage Chart ........................................................................... S-2
S2.1. Flash Top P.C.B. .................................................................... S-2
S3. Block Diagram .......................................................................... S-3
S3.1. Overall Block Diagram .......................................................... S-3
S4. Schematic Diagram .................................................................. S-4
S4.1. Interconnection Diagram ....................................................... S-4
S4.2. Flash Top Schematic Diagram .............................................. S-5
S4.3. CCD Flex Schematic Diagram .............................................. S-6
S4.4. Lens Flex Schematic Diagram .............................................. S-7
S5. Print Circuit Board .................................................................... S-8
S5.1. Flash Top P.C.B. .................................................................... S-8
S5.2. CCD Flex P.C.B. .................................................................... S-9
S5.3. Lens Flex P.C.B. .................................................................. S-10
S6. Replacement Parts List .......................................................... S-11
S7. Exploded View ....................................................................... S-16
S7.1. Frame and Casing Section ................................................. S-16
S7.2. Packing Parts and Accessories Section (1) ........................ S-17
S7.3. Packing Parts and Accessories Section (2) ........................ S-18
Table of contents
Service Manual
DSC1003024CE
Diagrams and Replacement
Parts List
Vol. 1
(S)...........Silver Type (except PC/EF)
Colour
(K)...........Black Type
(P)...........Pink Type (except PC/EF)
Model No.
DMC-F2P
DMC-F2PC
DMC-F2PR
DMC-F2PU
DMC-F2EB
DMC-F2EE
DMC-F2EF
DMC-F2EG
DMC-F2EP
DMC-F2GC
DMC-F2GF
DMC-F2GN
Digital Camera
Name of Signal
OFTR
FEP
This signal is connected
to the FEP schematic diagram.
Circuit name being connected.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
7.Indication on Schematic diagrams:
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as " " mark.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
COMPONENTS IDENTIFIED WITH THE MARK
HAVE THE SPECIAL CHARACTERISTICS
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice
S-2
S2. Voltage Chart
S2.1. Flash Top P.C.B.
Note) Indicated voltage values are the standard values for the unit measured by the DC electronic circuit tester (high-impedance) with the chassis taken as standard.
Therefore, there may exist some errors in the voltage values, depending on the internal impedance of the DC circuit tester.
REF No.
PIN No. POWER ON
IC8001
1
5.8
IC8001
2
0
IC8001
3
0
IC8001
4
0
IC8001
5
5.8
Q8009
1
6.9
Q8009
2
6.9
Q8009
3
0
Q8009
4
0
Q8009
5
6.9
Q8009
6
6.9
S-3
CCD
IC3001
CCD SIGNAL
PROCESSOR
FOCUS
IRIS
SDRAM/256Mbit
NAND FLASH ROM/512Mbit
NAND FLASH ROM/512Mbit
SD
CARD
CARD
(POWER SUPPLY)
BATTERY
REAR OPERATION UNIT
DMC-F2 OVERALL BLOCK DIAGRAM
IC9101
SYSTEM IC
SYSTEM IC
MOTOR DRIVE,
OIS DRIVE&
PRE PROCESS
IC6001
VENUS4
CAMERA PROCESS
J-PEG COMP/EX PANDS
MEDIA I/F
USB I/F
MAIN MICROPROCESSOR
J-PEG COMP/EX PANDS
MEDIA I/F
USB I/F
MAIN MICROPROCESSOR
FLASH
TOP OPERATION UNIT
IC1001
POWER
SHUTTER
IC9101
SYSTEM IC
IC6002
ZOOM
OIS CONTROL
LENS DRIVE
LCD DRIVE
LENS DRIVE
LCD DRIVE
AV OUT / DIGITAL
TERMINAL
TERMINAL
COLOR LCD
PANEL
(33mm ~ 132mm)
IC9101
SYSTEM IC
MICROPHONE
MICROPHONE AMP
SPEAKER CONTROL
SPEAKER CONTROL
SPEAKER
1/2.5" 10 MEGA PIX
CDS, AGC,
A/D, TG,
CCD DRIVER
2.5" PANEL
230k dots
230k dots
X6001
(24MHz)
X9101
(32.768kHz)
VIDEO OUT
IC8001
IGBT DRIVER
IC6004
FeRAM
FeRAM
IC3002
REGLATOR
IC1210
REGLATOR
S3. Block Diagram
S3.1. Overall Block Diagram
Click on the first or last page to see other DMC-F2P / DMC-F2PC / DMC-F2PR / DMC-F2PU / DMC-F2EB / DMC-F2EE / DMC-F2EF / DMC-F2EG / DMC-F2EP / DMC-F2GC / DMC-F2GF / DMC-F2GN service manuals if exist.