Panasonic DMC-F2P / DMC-F2PC / DMC-F2PR / DMC-F2PU / DMC-F2EB / DMC-F2EE / DMC-F2EF / DMC-F2EG / DMC-F2EP / DMC-F2GC / DMC-F2GF / DMC-F2GN Service Manual ▷ View online
25
8.3.8.
Removal of the Battery Case Unit
(Fig.D12)
(Fig.D13)
8.3.9.
Removal of the Battery Door Unit
(Fig.D14)
NOTE: (When Installing)
Make sure to confirm the following points when assembling:
• The Screw is tightened enough.
• Assembling conditions are fine. (No distortion, no abnormal-
• Assembling conditions are fine. (No distortion, no abnormal-
space.)
• No dust and/or dirt on Lens surfaces.
• LCD image is fine. (No dust and dirt on it, and no gradient
• LCD image is fine. (No dust and dirt on it, and no gradient
images.)
26
8.4.
Lens Disassembly Procedure
Precaution:
1. Do not remove the CCD when disassembling or reassem-
bling the lens in order to maintain it clean.
When remove it, refer to item “8.6.”.
When remove it, refer to item “8.6.”.
2. Keep dust or dirt away from the lens.
3. To remove dirt or dust from the lens, blow with dry air.
4. Do not touch the lens surface.
5. Apply grease (RFKZ0472) as shown on “THE APPLICA-
3. To remove dirt or dust from the lens, blow with dry air.
4. Do not touch the lens surface.
5. Apply grease (RFKZ0472) as shown on “THE APPLICA-
TION OF GREASE METHOD” in the figure.
6. Apply a light coat of grease using an object similar to a
toothpick.
7. The drive frame and direct frame should be replaced as a
unit.
8.4.1.
Removal of the Zoom Motor Unit
and Lens FPC P.C.B. Unit
and Lens FPC P.C.B. Unit
1. Peal the 3 barrier sheets.
2. Remove the 1 solder (A).
3. Remove the 3 locks.
4. Unscrew the 2 screws (A).
5. Shift the zoom motor unit to the indicated by arrow.
6. Remove the 1 solder (B).
7. Unscrew the 1 screw (B).
8. Remove the lens flex to the indicated by arrow.
2. Remove the 1 solder (A).
3. Remove the 3 locks.
4. Unscrew the 2 screws (A).
5. Shift the zoom motor unit to the indicated by arrow.
6. Remove the 1 solder (B).
7. Unscrew the 1 screw (B).
8. Remove the lens flex to the indicated by arrow.
27
8.4.2.
Removal of the Master Flange Unit
8.4.3.
Removal of the 1st Lens Frame/2nd
Lens Frame Move Unit
Lens Frame Move Unit
8.4.4.
Removal of the 2nd Lens Frame
Move Unit
Move Unit
28
8.4.5.
Removal of the Drive/Direct Frame
Unit
Unit
8.5.
Assembly Procedure for the
Lens
Lens
8.5.1.
Phase alignment of the Direct
Frame and Drive Frame Unit
Frame and Drive Frame Unit
8.5.2.
Phase alignment of the Drive/Direct
Frame Unit and Fixed Frame Unit
Frame Unit and Fixed Frame Unit
Click on the first or last page to see other DMC-F2P / DMC-F2PC / DMC-F2PR / DMC-F2PU / DMC-F2EB / DMC-F2EE / DMC-F2EF / DMC-F2EG / DMC-F2EP / DMC-F2GC / DMC-F2GF / DMC-F2GN service manuals if exist.