Panasonic BL-C1CE / BL-C1E Service Manual ▷ View online
33
BL-C1CE / BL-C1E
10 Measurements and Adjustments
10.1. The Inspection After The Repair
Inspect the following items after the repair.
• Starting up operation check.
• Status check.
• MAC Address Label check.
• Camera image check.
• Time setup check.
• Status check.
• MAC Address Label check.
• Camera image check.
• Time setup check.
4. Remove Main Board from Cabinet Cover.
34
BL-C1CE / BL-C1E
11 Maintenance
11.1. Cleaning
Only clean the camera after it has been turned off by disconnecting the AC adaptor or the plug of the AC cord.
11.1.1. Cleaning the Main Unit
If the lens is dusty, image quality may decrease. After taking away the dust on it, wipe it with a soft, dry cloth.
Note:
• Do not use alcohol, polishing powder, cleanser, benzine, thinner, wax, petroleum products or hot water to wipe the camera. Also
avoid glass cleaner, pesticide or hair spray. They may cause change in the shape or color of the camera.
• Do not directly touch the lens cover. Fingerprints may cause an unclear image.
11.1.2. Cleaning the Lens
A dusty lens may cause unclear images. Remove the dust with a cotton swab.
Note:
Do not touch the lens directly. Fingerprints may cause an unclear image.
35
BL-C1CE / BL-C1E
12 Factory Setting
12.1. FACTORY DEFAULT RESET Button
There is a FACTORY DEFAULT RESET button on the side of the camera.
Pressing the FACTORY DEFAULT RESET button resets the camera to factory default. If you lose your user name and pass-
word, use this button to reset the camera. To restore the wireless connection, access the camera by using a wired connection
and set up the wireless configuration.
word, use this button to reset the camera. To restore the wireless connection, access the camera by using a wired connection
and set up the wireless configuration.
• To reset the camera, press the FACTORY DEFAULT RESET button for 1 second when the camera is on.
• The indicator blinks orange, and then turns off for 5 seconds.
• Do not turn off the camera during the reset operation. The reset operation takes about 1 minute.
• The indicator blinks orange, and then turns off for 5 seconds.
• Do not turn off the camera during the reset operation. The reset operation takes about 1 minute.
Note:
• The internal clock will not be reset, but the time format will return to AM/ PM mode.
• All buffered images on the internal memory are deleted when resetting the camera to factory default.
• If the camera is restarted, all sensor logs are deleted.
• All buffered images on the internal memory are deleted when resetting the camera to factory default.
• If the camera is restarted, all sensor logs are deleted.
12.2. Resetting the Camera to Factory Default
All camera settings are reset to factory default when the Execute button is clicked.
To restore the wireless connection, access the camera by using a wired connection and set up the wireless configuration.
1. Click [Reset to Factory Default] on the Maintenance page.
2. Click [Execute].
To restore the wireless connection, access the camera by using a wired connection and set up the wireless configuration.
1. Click [Reset to Factory Default] on the Maintenance page.
2. Click [Execute].
• The indicator blinks orange, and then turns off for 5 seconds.
• All camera settings (user name, password, IP address, subnet mask etc.) are reset to factory default.
• If the camera is reset to factory default, the network connection mode changes to [Automatic Setup]. Reconfigure the camera
• All camera settings (user name, password, IP address, subnet mask etc.) are reset to factory default.
• If the camera is reset to factory default, the network connection mode changes to [Automatic Setup]. Reconfigure the camera
referring to Getting Started.
Note:
• The internal clock will not be reset, but the time format will return to AM/ PM mode.
• Pressing FACTORY DEFAULT RESET button resets the camera to the factory default.
• All buffered images on the internal memory are deleted when resetting the camera to factory default.
• The reset operation takes about 1 minute.
• Do not turn off the camera during the reset operation.
• Pressing FACTORY DEFAULT RESET button resets the camera to the factory default.
• All buffered images on the internal memory are deleted when resetting the camera to factory default.
• The reset operation takes about 1 minute.
• Do not turn off the camera during the reset operation.
• If the camera is restarted, all sensor logs are deleted.
36
BL-C1CE / BL-C1E
13 Block Diagram
Main Board
32Mbit Flash
[IC102]
CPU Core
Camera I/F
JPEG
Ethernet
MAC
Embedded
48kB SRAM
Memory I/F
Controller
APB
Bridge
System
Control
Control
Peripheral
Circuit
Bus
Matrix
[IC101]
AHB1
AHB2
APB
Ethernet PHY
[IC202]
25MHz
RTC IC
[IC302]
[IC302]
I2C
32.768kHz
2.8V
Regulator
Power LED
[ LED801 ]
3.3V DC-DC
Converter
DC Jack
[CN1]
Trans
[T1]
RJ45
[CN2]
Battery
BAT301
Clear Setting
SW [SW802]
SW [SW802]
64Mbit SDRAM
[IC103]
1.8V
Regulator
Socket
CN701
1/4 VGA CMOS
Sensor module
IC701
2.8V
2.8V
2.8V
1.8V
3.3V
3.3V
3.3V
3.3V
1.8V
3.3V
AC
Adaptor
+9V
BL-C1 BLOCK DIAGRAM
Click on the first or last page to see other BL-C1CE / BL-C1E service manuals if exist.