DOWNLOAD Panasonic BB-HCM715CE / BB-HCM735CE Service Manual ↓ Size: 3.52 MB | Pages: 83 in PDF or view online for FREE

9

*1

 When the camera is installed according to the instructions provided in the included documentation, and the camera has been 

properly waterproofed.

*2

 A customer-provided audio/video cable is needed to connect an external microphone, speaker, or TV.

*3

 Frame rate may decrease in the following situations.

- When buffering images
- When using colour night view mode
- When [Analog Video Output] is set to [Enable]
- When many users are viewing camera images

*4

 30 frames/second is not possible when viewing MJPEG images at 1280 

x

 960 resolution.

*5

 The camera supports POP Before SMTP Authentication and SMTP Authentication. PLAIN, LOGIN, and CRAM-MD5 SMTP

Authentication are supported. SSL supports SMTP over SSL. STARTTLS is not supported.

Communication Protocols

IPv4/IPv6 Dual-Stack

TCP, UDP, IP, HTTP, FTP, SMTP, DHCP, DNS, ARP, ICMP, POP3, NTP, UPnP™, SMTP Authentication, 

RTP, RTSP, RTCP, HTTPS

TCP, UDP, IP, HTTP, FTP, SMTP, DNS, ICMPv6, POP3, NDP, NTP, RTP, RTSP, RTCP, HTTPS

Image Buffer/Transfer Triggers

Timer, Alarm 1, Alarm 2, Motion Detection

Image Transfer Method

SMTP

*5

, FTP, HTTP

LAN Interface

10Base-T/100Base-TX Ethernet RJ-45 connector

Indicator Display

Power

Camera Operation

Ethernet Link

Dimensions (W x H x D)

100 mm x 100 mm x 74 mm

(3 15/16 inches x 3 15/16 inches x 2 15/16 inches)

Weight (Main Unit Only)

BB-HCM715: 335g (0.74 lb.)
BB-HCM735: 340g (0.75 lb.)

Power Supply

Optional AC adaptor (Model No. BB-HCA7CE / BB-HCA7E)
 Input 100-240 V AC, 50/60 Hz
Output 12 V DC, 750 mA
PoE
PoE standard IEEE802.3af-2003

Power Consumption

When Using Optional AC Adaptor (model No. BB-HCA7CE/BB-HCA7E)
About 3.3 W (7.5 W during pan/tilt scan)
When Using PoE 
About 3.3 W (7.5 W during pan/tilt scan)

Operating Temperature

BB-HCM715: 
Operation: +0 

°C (+32 °F) to +40 °C (+104 °F)

Storage: +0 

°C (+32 °F) to +50 °C (+122 °F)

BB-HCM735: 
Operation: -20 

°C (+4 °F) to +50 °C (+122 °F)

Storage: -25 

°C (-13 °F) to +60 °C (+140 °F)

Operating Humidity

BB-HCM715: 
Operation: 20 %—80 % (no condensation)
Storage: 20 %—90 % (no condensation)
BB-HCM735: 
Operation: 20 %—90 % (no condensation)
Storage: 20 %—90 % (no condensation)

10

The BB-HCM735 features an IP55-compliant

*1

 splash-resistant body that allows the camera to be used both indoors and out-

doors. (See the Installation Guide for proper outdoor installation instructions.)

The camera features an Ex zoom that allows you to magnify images by up to 2

× and a digital zoom that allows you to further

magnify images by up to 3

×, for a total zoom range of 6×. Additionally, the ActiveX zoom feature utilises software installed on

your computer to magnify images.

Camera images can be monitored from a PC, both on-site and over the Internet. You can even use your mobile phone to view
still images when you’re out of the house.

Live camera images can be viewed and buffered (i.e., stored in memory) in H.264, MPEG-4 and JPEG (MJPEG) formats, allow-
ing you to select the video format that best suits your needs.

The lens can be moved to a series of pre-programmed positions (presets) in a sequence, allowing you to monitor several areas
of the camera’s viewing area. The preset sequence contains up to 10 steps; each step in the sequence is one of the presets
stored in the camera. For each step in the sequence, you can also set the pan/tilt speed and the amount of time the lens holds
at each preset position.

The camera can be set to pan back and forth repeatedly, allowing you to continuously monitor a wide area. You can select the
start and end points of the pan operation, the speed at which the lens pans, and the amount of time the lens holds at the leftmost
and rightmost edge of the viewing angle when auto panning.

When this feature is enabled, the camera can automatically correct the contrast in dark areas of the camera image. This means
even when there is backlight or a large amount of contrast in the image, the camera can correct the image to provide a more
consistent, natural image.

The camera features a built-in microphone that allows you to monitor the audio while viewing live camera images using your PC.
You can connect a user-supplied microphone if desired. Additionally, by connecting a user-supplied external powered speaker,
you can talk to someone while seeing their image on your PC.

The camera’s motion detection feature allows you to buffer or transfer camera images when the camera detects motion in the
camera image.

Camera images can be automatically buffered at specific times, when the camera’s external sensors (customer-provided) are
triggered, or when the camera detects motion. You can program the camera to buffer these camera images, and then you can
play back these images later while accessing the camera or save them to your PC. You can also program the camera to transfer
images by E-mail or upload them to an FTP or HTTP server as they are being buffered.

The camera is compliant with PoE (IEEE 802.3af) standards, and contains a power receiving device that enables it to receive
power from the same Ethernet cable used for network connection. This allows you to mount the camera in locations where there
is no power outlet nearby, saving you the cost of installing a new power outlet. In addition, power can be supplied to the camera
using an Ethernet cable of up to 100 m (about 328 feet) long, allowing you more freedom to install the camera wherever you
want. PoE connection requires a PoE compliant hub or similar device. An optional AC adaptor can be used instead of a PoE
connection if you want to connect the camera to a standard AC outlet.

Camera images can be recorded to an optional SD/SDHC memory card in addition to the camera’s internal memory. The cam-
era supports Panasonic SD memory cards of 256 MB to 2 GB in capacity, and Panasonic SDHC memory cards of 4 GB to 8 GB
in capacity. Additionally, the Stand-alone SD Memory Card Recording feature allows you to configure the camera to record
images without using a PC.

11

When connecting the camera to a UPnP™ compatible router, the camera’s network settings can be automatically configured,
making setup quick and easy.

After registering your camera with the Viewnetcam.com service, you can access the camera while away from home using an
easy to remember Internet address of your choosing, such as ***.viewnetcam.com. 

All camera pages can be displayed in English, French, German, Italian, Spanish, Russian, Simplified Chinese, and Japanese.
The most commonly used camera pages can be displayed in Korean.

*1

When the camera is installed according to the instructions provided in the included documentation, and the camera has been

properly waterproofed.

12

Operating Power Supply: 3.3 V (for I/O), 1.8 V (for DDR2SDRAM), 1.2 V (for Core) 
Package: 433 pin Ball BGA
Operation Outline: The LSI component encodes image signals input by a camera to JPEG, MPEG or H.264 format and distrib-
utes data to a terminal connected to an IPv4 or IPv6 network using a network server function realised by software processing in
a built-in processor.
EEPROM (IC201), Audio Codec(IC501) and Real Time Clock IC (IC404) are accessed by I2C I/F. Ethernet PHY (IC301) is
accessed by MII (Media Independent Interface) I/F.

Operating Power Supply: 3.3 V 
Package: 48 pin Ball BGA
Capacity: 64 Mbit
Access Time: 70 ns
Operation Outline: The setting information for the network camera and the MAC address are stored.
Version Upgrade with Ethernet interface is possible.

Power Supply Voltage: 1.8 V 
Package: 84 pin Ball BGA
Capacity: 512 Mbit
Operation Outline: Two SDRAMs (IC103/104) are available for CPU processing work, storage of temporary image data.

Reset Voltage: 2.9 V