Panasonic BB-HCM580CE (serv.man2) Service Manual ▷ View online
49
BB-HCM580CE
10. Remove four Screws (A). And remove the Tilt Gear.
11. Remove four Screws (A). And remove the Upper Tilt Cover and the
Lower Tilt Cover.
12. Remove the Lens Cover.
13. Remove the FPC (1) from the Connector. And remove the Cable
Guide.
Lower Tilt Cover.
12. Remove the Lens Cover.
13. Remove the FPC (1) from the Connector. And remove the Cable
Guide.
14. Remove the FFC (1) and Cable from the Connector.
15. Remove three Screws (E). And remove the CCD Unit from the Lens
Guide Ass’y.
15. Remove three Screws (E). And remove the CCD Unit from the Lens
Guide Ass’y.
50
BB-HCM580CE
9 Measurements and Adjustments
9.1.
Adjustment
9.1.1.
When adjustment is unnecessary
9.1.2.
When adjustments are necessary
• When adjustments are necessary in case of exchanged replacement parts.
It is necessary the following adjustment in case of exchanged these replacement parts.
• When adjustments are necessary fault phenomenon.
It is necessary the following adjustment in case of these fault phenomenon.
Exchanged by a set of CPU board and CCD Unit
adjustment unnecessary
replacement parts
Iris Adjustment Tracking Adjust-
ment
Video
Adjustment
CPU board
O
O
O
CCD board
-
O
O
Lens board
O
O
O
Lens
O
O
-
Optical Filter(LPF)
-
O
O
fault phenomenon
Iris Adjustment
Track Adjust-
ment
Video
Adjustment
Dark Screen
O
-
O
discolored
-
-
O
Out of Focus
-
O
-
51
BB-HCM580CE
9.2.
Tools and Equipment for Adjustment and Repair
(1) HP light box
• Light Box [with Standard Accessories]: VFK1164TDVLB
• Lamp [for Light Box]: VFK1164LA02
• Color Chart: VFK1164TDVCB
• Color Temp. Conversion Filter for 5100K: VFK1164LBB12
• ND Filter: VFK1164ND06 and VFK1164ND01
• Collimator (Infinity Adjustment Lens)[with Focus Pattern Chart]: VFK1164TCM02
• Attachment Ring: 46mm
• Lamp [for Light Box]: VFK1164LA02
• Color Chart: VFK1164TDVCB
• Color Temp. Conversion Filter for 5100K: VFK1164LBB12
• ND Filter: VFK1164ND06 and VFK1164ND01
• Collimator (Infinity Adjustment Lens)[with Focus Pattern Chart]: VFK1164TCM02
• Attachment Ring: 46mm
(2) LAN Cable [Cross]
(3) Personal Computer
(4) AC Adaptor
(5) HCM5 PTZ CAMERA Service Tool
(6) DC power supply
(7) Camera stand
(3) Personal Computer
(4) AC Adaptor
(5) HCM5 PTZ CAMERA Service Tool
(6) DC power supply
(7) Camera stand
• Preparation
• Cable Connection
• Cable Connection
Tools and Equipment which need for each adjustment
Note:
Collimator must be inserted all the way into light box until reaching stop point.
Zoom Tracking
IRIS
VIDEO
(1) Light Box (with Lamp)
O
-
O
• Color Chart
-
-
O
• Focus Pattern Chart
O
-
-
• Color Temp. Conversion Filter for 5100K
-
-
O
• ND Filter
O
-
-
• Collimator (Infinity Adjustment Lens)
O
-
O
• Attachment Ring
O
-
O
(2) LAN Cable
O
O
O
(3) Personal Computer
O
O
O
(4) AC Adaptor
O
O
O
(5) HCM5 PTZ CAMERA Service Tool
O
O
O
(6)DC Power Supply
O
-
O
(7)Camera Stand
O
-
O
52
BB-HCM580CE
9.3.
HP Light Box (High-Precision) Operating Instructions
This light box enables the improvement of adjustment accuracy from a previous light box.
Features
1. High-Internesity Luminance and Long Life Made Possible by New Halogen Lamp (20W / DC12V)
Luminance:=1,900 cd/m
2
iLuminance conversion:5,900lux) (compared with conventional models: 2.4 times)
Life: Over 1,000 hours (Rate compared with conventional modela: Over 10 times)
2. Compact Design
Specific volume compared with conventional models: Approx.65% (Not including camera stand)
3. Attachment of Collimator (Collimator: Infinity Adjustment Lens)
It is possible to screw up a collimator to the Light Box. And it is very easy to compensate for the slant (shear of the optical
axis) caused by the weight of the collimator itself.
axis) caused by the weight of the collimator itself.
4. Attachment of Chart and Optical Filters
For easy and quick replacement to the charts, the light box is equipped with the slot and the chart holder. Also, it is equipped
with the slota for optical filters, one for color temperature conversion filters, one for cokor compensation filters. It is very con-
venient to set up for a color condition according to adjustment procedure.
with the slota for optical filters, one for color temperature conversion filters, one for cokor compensation filters. It is very con-
venient to set up for a color condition according to adjustment procedure.
5. Integrated Cooling Fan
To prevent the temperature from rising inside the Light Box and to extend the life of the lamp, it is equipped.
<Specifications>
Preparation
1. DC power supply: More than 2A at 12V---1 set (For Light box)
2. Camera stand: ---2 pieces (Use for DVC type by situation)
3. Compact transmission chart
4. Various kinds of thin coating optical filter
2. Camera stand: ---2 pieces (Use for DVC type by situation)
3. Compact transmission chart
4. Various kinds of thin coating optical filter
Size:
90mm (W)~197.5mm (D)~70mm (H)
Weight:
750 g
Power Supply:
External DC regulated power supply
(DC more than 2A)
(DC more than 2A)
Lamp:
DC12V 20V halogen lamp (Life: 2,000 hours)
Luminance:
1,900 cd/m
2
±100 cd/m
2
(center of the emission face)
(illuminance conversion: 5,900 lux)
Homogeneity:
Within ±10%
Color tempera-
ture:
ture:
3,100 K ±100K
(center of the emission face)
(center of the emission face)
CIE chromaticity
coordinate:
coordinate:
X = 0.430 ±0.02 y = 0.400 ±0.02
Internal filter:
LB60 + M50
(modifited: 1.5mm thickeness)
(modifited: 1.5mm thickeness)
Click on the first or last page to see other BB-HCM580CE (serv.man2) service manuals if exist.