Panasonic CQ-xxx Service Manual / Other ▷ View online
IDC Module 3 : Removal and Re-Installation of the Upper chassis unit.
Manually Checking Unit Functions.
End Part Three
After
observing unit
functions,
return the
return the
horizontal
rack to the
home
position.
Removal and Re-installation of the Upper chassis unit
IN DASH CHANGER UNIT - Module 3
Part Four
IDC Module 3 : Removal and Re-Installation of the Upper chassis unit.
Reinstalling the Upper chassis unit
Part Four,1
The procedure for reassembling
the Upper chassis unit onto the
Main Chassis is basically
performing each of the previous
steps for removal in reverse order.
There are however, some
preliminary positioning
requirements that must be
observed before beginning
reassembly.
Tips:
A. Attach front of
load assembly
first.
B. Make sure
horizontal motor
connector cable
is out of the way.
A. Attach front of
load assembly
first.
B. Make sure
horizontal motor
connector cable
is out of the way.
IDC Module 3 : Removal and Re-Installation of the Upper chassis unit.
Reinstalling the Upper chassis unit.
Part Four,2
The
spring
loaded catch
of
the Lever Guide
Plate Assembly
should be pulled
completely back
to allow the
Lever
to drop to
its lowest
possible position.
Click on the first or last page to see other CQ-xxx service manuals if exist.