Panasonic CQ-xxx Service Manual / Other ▷ View online
IDC Module 4 : Removal and Reinstallation of the Stocker block
Removal of the Stocker block
Part One,3
Separate the Rear
Disc Guide
Assembly from the
Main Chassis.
Make note of the
alignment points
that
mate with the
stocker cover plate
and the Main
Chassis.
Top View
IDC Module 4 : Removal and Reinstallation of the Stocker block
Removal of the Stocker block
Part One,4
A. Take care not to lose the
black cam gear
black cam gear
ring
as the
stocker cover plate is lifted.
B. Disconnect the ribbon
cable from connector
cable from connector
CN401
.
C. Remove the single
screw
that secures the stocker
switch PCB to the Main
Chassis.
switch PCB to the Main
Chassis.
IDC Module 4 : Removal and Reinstallation of the Stocker block
Removal of the Stocker block
Part One,5
The entire
stocker block
can now be
lifted off with
the four
stocker
springs
remaining in
place.
IDC Module 4 : Removal and Reinstallation of the Stocker block
Removal of the Stocker block
Part One,6
The Plastic
Cam Gears,
five in all, will
lift off with the
tray assembly,
this is ok.
Click on the first or last page to see other CQ-xxx service manuals if exist.