Panasonic SU-HTB500EB / SU-HTB500EEK / SU-HTB500EG / SC-HTB500EB / SC-HTB500EE / SC-HTB500EG Service Manual ▷ View online
33
Caution 1 : Before assembling the Main Chassis Assembly, ensure the FFC of the connector (CN350) is properly bend at
supporting tape area.
supporting tape area.
Caution 2 : During assembling, ensure the Main Chassis Assembly is seated properly onto the locators.
34
8.8.
Disassembly of LED P.C.B. and Panel Tact Switch P.C.B.
• Refer to “Disassembly of Back Cabinet Assembly”.
• Refer to “Disassembly of Main Chassis Assembly”.
• Refer to “Disassembly of Main Chassis Assembly”.
Step 1 : Remove 4 screws and detach Panel Tact Switch P.C.B..
Step 2 : Slightly detach the Panel Tact Switch P.C.B. from Front Panel Assembly.
Step 2 : Slightly detach the Panel Tact Switch P.C.B. from Front Panel Assembly.
Step 3 : Remove 3 screws.
Step 4 : Remove the PC Sheet.
Step 5 : Remove the LED P.C.B. together with Panel Tact Switch P.C.B. as arrow shown.
Step 4 : Remove the PC Sheet.
Step 5 : Remove the LED P.C.B. together with Panel Tact Switch P.C.B. as arrow shown.
35
Caution 1 : During assembling, ensure the LED P.C.B. is seated properly onto the locator.
Caution 2 : During assembling, ensure the 3P Cable Wire is properly dressed behind Front Panel Assembly rib.
Caution 2 : During assembling, ensure the 3P Cable Wire is properly dressed behind Front Panel Assembly rib.
36
8.9.
Disassembly of AC Inlet P.C.B.
• Refer to “Disassembly of Back Cabinet Assembly”.
• Refer to “Disassembly of Main Chassis Assembly”.
• Refer to “Disassembly of Main Chassis Assembly”.
Step 1 : Cut off the Cable Tie.
Caution : During assembling, ensure the head of cable tie must be facing inward and tail of cable tie must be properly cut
with remaining 1mm away from the head.
Step 2 : Remove 1 screw.
Caution : During assembling, ensure the head of cable tie must be facing inward and tail of cable tie must be properly cut
with remaining 1mm away from the head.
Step 2 : Remove 1 screw.
Step 3 : Slightly lift up the AC Inlet P.C.B. as arrow shown.
Caution : During assembling, ensure the AC Inlet P.C.B. is properly seated onto the locators.
Caution : During assembling, ensure the AC Inlet P.C.B. is properly seated onto the locators.
Click on the first or last page to see other SU-HTB500EB / SU-HTB500EEK / SU-HTB500EG / SC-HTB500EB / SC-HTB500EE / SC-HTB500EG service manuals if exist.