Panasonic SC-ZT2EE / SC-ZT2GS / SU-ZT2EE / SU-ZT2GS / SB-ZT2EE / SB-ZT2GS Service Manual ▷ View online
61
10.4.4. Disassembly of SMPS P.C.B. and AC Inlet P.C.B.
• Refer to “Disassembly of Woofer Block”.
• Refer to “Disassembly of Middle Cabinet Assembly”.
• Refer to “Disassembly of Middle Cabinet Assembly”.
Step 1 : Detach 10P cable at the connector (CN5802) on the SMPS P.C.B.
Step 2 : Remove 3 screws.
Step 3 : Remove 1 screw.
Step 2 : Remove 3 screws.
Step 3 : Remove 1 screw.
62
Caution : During assembling, ensure that the SMPS P.C.B. is properly fitted onto the locators of the Middle Cabinet
Assembly.
63
Step 4 : Turn and place the SMPS P.C.B. aside as arrow shown.
Step 5 : Remove 1 screw.
Step 6 : Remove the Support P.C.B. with tweezers.
Caution : During assembling, ensure that the Support P.C.B. is properly fitted onto the locators of the Middle Cabinet
Step 5 : Remove 1 screw.
Step 6 : Remove the Support P.C.B. with tweezers.
Caution : During assembling, ensure that the Support P.C.B. is properly fitted onto the locators of the Middle Cabinet
Assembly.
64
Step 7 : Using tweezers, gently push the AC Inlet P.C.B. until the AC Inlet is released from the Middle Cabinet Assembly, then lift up
to remove both AC Inlet P.C.B. and SMPS P.C.B.
Caution : Ensure that the wires (Black and Red) are dressed to the right side of the boss during assembling of the AC Inlet
to remove both AC Inlet P.C.B. and SMPS P.C.B.
Caution : Ensure that the wires (Black and Red) are dressed to the right side of the boss during assembling of the AC Inlet
P.C.B.
Click on the first or last page to see other SC-ZT2EE / SC-ZT2GS / SU-ZT2EE / SU-ZT2GS / SB-ZT2EE / SB-ZT2GS service manuals if exist.