Panasonic SC-ZT2EE / SC-ZT2GS / SU-ZT2EE / SU-ZT2GS / SB-ZT2EE / SB-ZT2GS Service Manual ▷ View online
53
Step 9 : Detach 2P cable at the connector (CN6052) on the Extent P.C.B.
Step 10 : Using a Jig (RFKZ0535), hook on to detach antenna wire at the RF connector (ET6002) on the Extent P.C.B.
Caution : The RF connector (ET6002) is fragile, take extra care not to damage it during disassembling.
Step 10 : Using a Jig (RFKZ0535), hook on to detach antenna wire at the RF connector (ET6002) on the Extent P.C.B.
Caution : The RF connector (ET6002) is fragile, take extra care not to damage it during disassembling.
Caution 1 : During assembly, position the antenna wire around the connector (CN6052) and the locator and place it into
the slot.
Caution 2 : Position the 2P cable around the guide and place it into the slot above the antenna wire.
54
Step 11 : Remove 2 screws.
Step 12 : Lift up to remove Arm Cover A.
55
Caution 1 : Align the Tip of Arm Cover A to the Tip of the Arm during assembly of Arm Cover A.
Caution 2 : Ensure the wires that are clamped onto the Arm are kept within Arm Cover A when assembling of Arm Cover
A.
Step 13 : Remove 1 screw.
56
Step 14 : Tilt the Woofer Block in order as arrows shown to detach it from the Tweeter Block.
Click on the first or last page to see other SC-ZT2EE / SC-ZT2GS / SU-ZT2EE / SU-ZT2GS / SB-ZT2EE / SB-ZT2GS service manuals if exist.