Panasonic SC-ZT2EE / SC-ZT2GS / SU-ZT2EE / SU-ZT2GS / SB-ZT2EE / SB-ZT2GS Service Manual ▷ View online
45
Caution : During assembling, ensure that the Main P.C.B. is
fitted properly onto locators.
10.3.7. Disassembly of Front Cabinet
• Refer to “Disassembly of Top Cabinet”.
• Refer to (Step 1) - (Step 4) of “Disassembly of Wireless TX
• Refer to (Step 1) - (Step 4) of “Disassembly of Wireless TX
P.C.B. and TX Module P.C.B.”.
Step 1 : Remove 1 screw.
Step 2 : Detach 22P FFC at the connector (CN4601) on the
Main P.C.B.
Step 2 : Detach 22P FFC at the connector (CN4601) on the
Main P.C.B.
46
Step 3 : Lift both sides of the Front Cabinet to release from the
guides and release the 3 catches at the bottom of the Main
Unit.
Step 4 : Remove the Front Cabinet.
guides and release the 3 catches at the bottom of the Main
Unit.
Step 4 : Remove the Front Cabinet.
10.3.8. Disassembly of Panel P.C.B. and
Power SW P.C.B.
• Refer to “Disassembly of Top Cabinet”.
• Refer to (Step 1) - (Step 4) of “Disassembly of Wireless TX
• Refer to (Step 1) - (Step 4) of “Disassembly of Wireless TX
P.C.B. and TX Module P.C.B.”.
• Refer to “Disassembly of Front Cabinet”.
Step 1 : Remove the Volume Knob.
Step 2 : Remove 3 screws.
Step 3 : Remove 1 screw.
Step 4 : Remove the VCR earth angle.
Caution : Keep the VCR earth angle in safe place for
Step 3 : Remove 1 screw.
Step 4 : Remove the VCR earth angle.
Caution : Keep the VCR earth angle in safe place for
assembling purpose.
47
Step 5 : Remove the Panel P.C.B. and Power SW P.C.B.
Caution : During assembling, ensure that the Power SW
Caution : During assembling, ensure that the Power SW
P.C.B. and Panel P.C.B. are fitted properly onto the loca-
tors.
Note : During assembling of the Power SW P.C.B. and
Panel P.C.B., ensure that the 3P wire is positioned above
the Wireless Holder as diagram shown.
48
10.4. Speaker Unit (SB-ZT2)
10.4.1. Disassembly of Woofer Block
Step 1 : Lay the Speaker Unit on a support block as shown.
Step 2 : Remove 9 screws.
Step 3 : Remove 3 screws.
Step 2 : Remove 9 screws.
Step 3 : Remove 3 screws.
Click on the first or last page to see other SC-ZT2EE / SC-ZT2GS / SU-ZT2EE / SU-ZT2GS / SB-ZT2EE / SB-ZT2GS service manuals if exist.