Panasonic SC-HC55EG Service Manual ▷ View online
53
Caution : During assembling, ensure the iPhone P.C.B. is
seated properly on the locator.
seated properly on the locator.
8.16. Disassembly of Top Guide Reel
• Refer to “Disassembly of Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Net Frame Assembly”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Net Frame Assembly”
• Refer to “Disassembly of Front Panel Block”
Step 1 : Remove 4 screws.
Step 2 : Upset the Front Panel Block.
Step 3 : Remove Top Guide Reel as arrow shown.
Step 3 : Remove Top Guide Reel as arrow shown.
54
Caution : During assembling, ensure the Top Guide Reel
guides are seated properly on the Front Panel Block.
guides are seated properly on the Front Panel Block.
8.17. Disassembly of Bottom Guide
Reel
• Refer to “Disassembly of Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Net Frame Assembly”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Gear Box Assembly”
• Refer to “Disassembly of Remote Sensor P.C.B. & iPod
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Net Frame Assembly”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Gear Box Assembly”
• Refer to “Disassembly of Remote Sensor P.C.B. & iPod
Open Switch P.C.B.”
• Refer to “Disassembly of iPod Tub Assembly”
Step 1 : Remove 4 screws.
Step 2 : Hold on to the Bottom Guide Reel from bottom side
when release 3 catches.
Caution : During assembling, ensure the Bottom Guide
Reel is fully catched
when release 3 catches.
Caution : During assembling, ensure the Bottom Guide
Reel is fully catched
55
Step 3 : Upset the Front Panel Block.
Step 4 : Remove Bottom Guide Reel.
Step 4 : Remove Bottom Guide Reel.
Step 5 : Remove 4 Lid Rollers.
Caution : During assembling, ensure the Lid Rollers is
fixed as diagram shown.
fixed as diagram shown.
56
8.18. Disassembly of Top Ornament
Assembly
• Refer to “Disassembly of Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Net Frame Assembly”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Net Frame Assembly”
• Refer to “Disassembly of Front Panel Block”
Step 1 : Detach 12P FFC at the connector (CN901) on the
Main P.C.B..
Main P.C.B..
Step 2 : Remove 2 screws.
Step 3 : Remove Top Ornament Assembly as arrow shown.
Caution : During assembling, ensure the Top Ornament
Assembly is fully catched onto Rear Cabinet Assembly.
Assembly is fully catched onto Rear Cabinet Assembly.
Click on the first or last page to see other SC-HC55EG service manuals if exist.