Panasonic SC-EN37EB / SC-EN37EG Service Manual ▷ View online
· Disassembly of net frame ass’y
Step 5 Remove 4 screws.
· Removal of Transformer P.C.B.
Step 1 Remove 1 screw on back cabinet assy.
Step 2 Remove 3 screws to remove the port unit.
Step 3 Remove 4 screws on Transformer P.C.B. unit.
Step 3 Remove 4 screws on Transformer P.C.B. unit.
Step 4 Unsolder wire and remove Transformer P.C.B..
29
SC-EN37EB / SC-EN37EG
10 Service Positions
General procedures:
Connect the DC in cord cable from (SB-EN37A) to main set, connect AC power supply cord to speaker to on the set. Load in cd
and switch off the set. Proceed to checking.
Note: For description of the disassembly procedures, see the Section 9.
Connect the DC in cord cable from (SB-EN37A) to main set, connect AC power supply cord to speaker to on the set. Load in cd
and switch off the set. Proceed to checking.
Note: For description of the disassembly procedures, see the Section 9.
30
SC-EN37EB / SC-EN37EG
10.1. Check and Repair of CD Servo P.C.B.
31
SC-EN37EB / SC-EN37EG
10.2. Check and repair of Main P.C.B., Sensor P.C.B., Tuner P.C.B., Motor
P.C.B., D-Port P.C.B., Panel P.C.B., LED P.C.B., Power Switch P.C.B.,
Tact Switch P.C.B. & Switch P.C.B.
Tact Switch P.C.B. & Switch P.C.B.
32
SC-EN37EB / SC-EN37EG
Click on the first or last page to see other SC-EN37EB / SC-EN37EG service manuals if exist.