Panasonic SC-EN37EB / SC-EN37EG Service Manual ▷ View online
Step 1 Desolder the terminal.
Step 2 Remove 3 screws.
Step 3 Flip the CD Servo P.C.B. over to one side.
Step 3 Flip the CD Servo P.C.B. over to one side.
Step 1 Remove 3 screws.
· Disassembly of motor assembly (gears & belt)
Step 2 Remove motor assembly.
Step 3 Remove 2 screws.
Step 2 Remove motor assembly.
Step 3 Remove 2 screws.
Step 4 Detach FFC out from the connector.
Step 5 Attach a short pin to the unit.
Caution:
Insert a short pin into FFC of the optical pickup. [See “Handling
Precautions for traverse unit”].
Step 5 Attach a short pin to the unit.
Caution:
Insert a short pin into FFC of the optical pickup. [See “Handling
Precautions for traverse unit”].
Step 4 Remove the belt.
Step 5 Remove pulley gear, 2nd gear and drive gear.
Step 5 Remove pulley gear, 2nd gear and drive gear.
9.12. Disassembly of CD Servo P.C.B.
· Follow the (Step 1) - (Step 4) of Item 9.4 - Disassembly of Rear Cabinet
· Follow the (Step 1) - (Step 5) of Item 9.7 - Disassembly of Main P.C.B., Sensor P.C.B. & Tuner P.C.B.
· Follow the (Step 1) - (Step 2) of Item 9.9 - Disassembly of Traverse Unit
· Follow the (Step 1) - (Step 4) of Item 9.11 - Replacement of Traverse Cover
· Follow the (Step 1) - (Step 5) of Item 9.7 - Disassembly of Main P.C.B., Sensor P.C.B. & Tuner P.C.B.
· Follow the (Step 1) - (Step 2) of Item 9.9 - Disassembly of Traverse Unit
· Follow the (Step 1) - (Step 4) of Item 9.11 - Replacement of Traverse Cover
9.13. Disassembly of Motor Unit & Motor P.C.B.
· Follow the (Step 1) - (Step 4) of Item 9.4 - Disassembly of Rear Cabinet
· Follow the (Step 1) - (Step 5) of Item 9.7 - Disassembly of Main P.C.B., Sensor P.C.B. & Tuner P.C.B.
· Follow the (Step 1) - (Step 5) of Item 9.7 - Disassembly of Main P.C.B., Sensor P.C.B. & Tuner P.C.B.
25
SC-EN37EB / SC-EN37EG
· Disassembly of CD Block
Step 1 Remove 6 screws to remove CD Block Unit.
Step 1 Remove 6 screws to remove CD Block Unit.
· Disassembly of CD Lid
Step 2 Remove 2 screws.
Step 2 Remove 2 screws.
Step 6 Remove 2 screws at motor unit.
Step 7 Remove 1 screw and unsolder 3 points at gear base.
Step 7 Remove 1 screw and unsolder 3 points at gear base.
· Disassembly of SW Lever & Roller Guide
Step 3 Remove 4 screws.
Step 4 Remove sw lever (left) and roller guide (R).
Step 3 Remove 4 screws.
Step 4 Remove sw lever (left) and roller guide (R).
9.14. Disassembly of CD Block & CD Lid
· Follow the (Step 1) - (Step 4) of Item 9.4 - Disassembly of Rear Cabinet
· Follow the (Step 1) - (Step 5) of Item 9.7 - Disassembly of Main P.C.B., Sensor P.C.B. & Tuner P.C.B.
· Follow the (Step 1) - (Step 2) of Item 9.8 - Disassembly of Switch P.C.B.
· Follow the (Step 1) of Item 9.13 - Disassembly of Motor Unit & Motor P.C.B.
· Follow the (Step 1) - (Step 5) of Item 9.7 - Disassembly of Main P.C.B., Sensor P.C.B. & Tuner P.C.B.
· Follow the (Step 1) - (Step 2) of Item 9.8 - Disassembly of Switch P.C.B.
· Follow the (Step 1) of Item 9.13 - Disassembly of Motor Unit & Motor P.C.B.
26
SC-EN37EB / SC-EN37EG
Step 5 Remove cd lid.
Step 1 Remove 6 screws.
Step 2 Remove the back cabinet ass’y..
Step 3 Unsolder the lead wires, (-) and (+).
Step 4 Remove 4 screws.
· Disassembly of net frame ass’y
· Disassembly of net frame ass’y
Step 5 Remove 4 screws.
9.15. Disassembly of Speakers
9.15.1. Disassembly of the speaker (SB-EN37) - (R)
27
SC-EN37EB / SC-EN37EG
Step 1 Remove 6 screws.
Step 2 Remove the back cabinet ass’y..
Step 3 Unsolder the lead wires.
Step 4 Remove 4 screws.
Step 4 Remove 4 screws.
9.15.2. Disassembly of the rear cabinet (SB-EN37A) - (L)
28
SC-EN37EB / SC-EN37EG
Click on the first or last page to see other SC-EN37EB / SC-EN37EG service manuals if exist.