Panasonic SA-XH70GW / SA-XH70EE / SC-XH70EE Service Manual ▷ View online
49
12.4. Disassembly of Top Cabinet
Step 1 Remove 2 screws.
Step 2 Remove 3 screws.
Step 3 Slightly pull both sides of the Top Cabinet as diagram
shown.
shown.
Step 4 Slightly lift both sides of the Top Cabinet in an outward
direction about 30
direction about 30
°
.
Step 5 Press the catches and remove the Top Cabinet as arrow
shown in sequence.
Caution: Avoid touching electrical components when hand
is inserted under the Top Cabinet.
shown in sequence.
Caution: Avoid touching electrical components when hand
is inserted under the Top Cabinet.
50
Caution: During assembling, ensure that the Top Cabinet
is inserted into the Front Panel Block Assembly.
is inserted into the Front Panel Block Assembly.
12.5. Replacement of Tray Ornament
Step 1 Use a Paper Clip and insert into the hole on the bottom
of the unit.
Step 2 Push the Paper Clip sideway in the direction of the
arrow to eject the Tray.
of the unit.
Step 2 Push the Paper Clip sideway in the direction of the
arrow to eject the Tray.
Step 3 Slide the Tray out as direction of arrow.
51
Step 4 Upset the Unit.
Step 5 Release 2 catches.
Caution: During assembling, ensure that the Tray Orna-
ment is inserted and fully catched onto the Tray.
Step 5 Release 2 catches.
Caution: During assembling, ensure that the Tray Orna-
ment is inserted and fully catched onto the Tray.
Step 6 Remove the Tray Ornament in the direction of arrow.
Caution: During assembling, ensure that the Tray Orna-
ment is properly inserted onto the Tray.
ment is properly inserted onto the Tray.
Step 7 Slide the Tray in fully.
52
12.6. Disassembly of Front Panel
Block Assembly
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Replacement of Tray Ornament”.
• Refer to “Replacement of Tray Ornament”.
Step 1 Detach 5P Wire at the connector (FP9001) on Backend
P.C.B..
Step 2 Detach 17P FFC at the connector (CN203) on Main
P.C.B..
Step 3 Lift up the Himelon.
Caution: Replace the Himelon if it is torn.
P.C.B..
Step 2 Detach 17P FFC at the connector (CN203) on Main
P.C.B..
Step 3 Lift up the Himelon.
Caution: Replace the Himelon if it is torn.
Step 4 Release 2 tabs at each side of the Front Panel Block
Assembly in the direction of arrow.
Assembly in the direction of arrow.
Step 5 Release 3 tabs at the Bottom Chassis.
Caution: Do not exert strong force when releasing the tabs.
Caution: Do not exert strong force when releasing the tabs.
Caution: During assembling, ensure that the Front Panel
Block Assembly is properly inserted and fully catched
onto the Bottom Chassis.
Block Assembly is properly inserted and fully catched
onto the Bottom Chassis.
Click on the first or last page to see other SA-XH70GW / SA-XH70EE / SC-XH70EE service manuals if exist.