Panasonic SA-PT475EE Service Manual / Other ▷ View online
29
Step 12 Lift up the Main P.C.B. according to the diagram
shown.
Step 13 Detach 5P cable at the connector (FP9001) on DVD
Module P.C.B.
Step 14 Remove the front panel assembly.
shown.
Step 13 Detach 5P cable at the connector (FP9001) on DVD
Module P.C.B.
Step 14 Remove the front panel assembly.
6.7.
Disassembly of Panel, Power
Button P.C.B.
Button P.C.B.
• Follow (Step 1) to (Step 3) of Item 6.3.
• Follow (Step 1) to (Step 14) of Item 6.6.
• Follow (Step 1) to (Step 14) of Item 6.6.
Step 1 Remove the volume knob.
Step 2 Remove 3 screws (Without Washer) on Panel P.C.B.
Step 3 Remove 2 screws (With Washer) on Panel P.C.B.
Step 4 Remove 2 earth springs on Panel P.C.B.
Caution: Keep the earth springs in safe place. Avoid dent-
ing it. Place it back during assembling.
Caution: Keep the earth springs in safe place. Avoid dent-
ing it. Place it back during assembling.
Step 5 Release 2 catches.
30
Step 6 Remove Panel P.C.B.
Step 7 Remove 2 screws on Power Button P.C.B.
Step 8 Remove Power Button P.C.B.
Step 8 Remove Power Button P.C.B.
Caution: During assembling, ensure the 3P wire that is sol-
der to Power Button P.C.B at location (H6803) is properly
inserted into the U-Slot Ribs.
der to Power Button P.C.B at location (H6803) is properly
inserted into the U-Slot Ribs.
6.8.
Disassembly of Auto Setup
Speaker P.C.B.
Speaker P.C.B.
• Follow (Step 1) to (Step 3) of Item 6.3.
• Follow (Step 1) to (Step 6) of Item 6.6.
• Follow (Step 1) to (Step 6) of Item 6.7.
• Follow (Step 1) to (Step 6) of Item 6.6.
• Follow (Step 1) to (Step 6) of Item 6.7.
Step 1 Remove the Auto Setup Speaker P.C.B. in the direction
of arrow.
6.9.
Disassembly of Mic P.C.B.
• Follow (Step 1) to (Step 3) of Item 6.3.
• Follow (Step 1) to (Step 14) of Item 6.6.
• Follow (Step 1) to (Step 6) of Item 6.7.
• Follow (Step 1) to (Step 14) of Item 6.6.
• Follow (Step 1) to (Step 6) of Item 6.7.
Step 1 Remove 1 screw on Mic Fixing P.C.B.
Step 2 Remove the Mic Fixing P.C.B.
Step 2 Remove the Mic Fixing P.C.B.
31
Step 3 Remove the Mic P.C.B. in the direction of arrow.
6.10. Disassembly of DVD Lid
• Follow (Step 1) to (Step 3) of Item 6.3.
• Follow (Step 1) to (Step 13) of Item 6.6.
• Follow (Step 1) to (Step 13) of Item 6.6.
Step 1 Open the DVD lid in the direction of arrow, until it is
aligned parallel with the front panel.
aligned parallel with the front panel.
Step 2 Move the shaft (R) of the DVD lid in the direction of
arrow (1) & (2).
Step 3 Lift the door spring of shaft (L) in the direction of arrow
(3).
Step 4 Move the shaft (L) of the DVD Lid in the direction of
arrow (4).
Step 5 Remove the DVD lid in the direction of arrow.
arrow (1) & (2).
Step 3 Lift the door spring of shaft (L) in the direction of arrow
(3).
Step 4 Move the shaft (L) of the DVD Lid in the direction of
arrow (4).
Step 5 Remove the DVD lid in the direction of arrow.
6.11. Disassembly of iPod P.C.B.
• Follow (Step 1) to (Step 3) of Item 6.3.
• Follow (Step 1) to (Step 13) of Item 6.6.
• Follow (Step 1) to (Step 13) of Item 6.6.
Step 1 Pull out the iPod Cradle Unit as arrow shown.
Step 2 Remove connector cover.
Caution: Keep the connector cover in safe place. Avoid
denting it. Place it back during assembling.
Step 2 Remove connector cover.
Caution: Keep the connector cover in safe place. Avoid
denting it. Place it back during assembling.
Step 3 Insert and tilt the flat head screw driver into the gap to
release the catches in the direction of arrow shown.
release the catches in the direction of arrow shown.
32
Caution: Do not exert strong force when releasing the
catches.
catches.
Step 4 Pull the Cradle Lid gently outwards as arrow shown.
Step 5 Push and slide the Cradle Lid downwards to remove
Cradle Lid as arrow shown.
Step 6 Remove the iPod Cradle Assembly in the direction of
arrow shown.
Cradle Lid as arrow shown.
Step 6 Remove the iPod Cradle Assembly in the direction of
arrow shown.
Step 7 Remove 1 screw at the Cradle chassis.
Step 8 Release 2 catches at the Cradle chassis.
Step 9 Remove Cradle chassis.
Step 8 Release 2 catches at the Cradle chassis.
Step 9 Remove Cradle chassis.
Step 10 Remove 2 screws on iPod P.C.B.
Step 11 Remove iPod P.C.B.
Step 11 Remove iPod P.C.B.
6.12. Disassembly of AC Inlet P.C.B.
• Follow (Step 1) to (Step 3) of Item 6.3.
Click on the first or last page to see other SA-PT475EE service manuals if exist.