Panasonic SA-PT460EB / SA-PT460EG Service Manual ▷ View online
Step 1 Remove 1 screw from the USB bracket.
Step 2 Remove the USB bracket.
Step 3 Remove the USB P.C.B.
9.11. Disassembly of DVD Lid
•
•
•
•
Follow (Step 1) to (Step 3) of Item 9.3.
•
•
•
•
Follow (Step 1) to (Step 8) of Item 9.7.
•
•
•
•
Disassembly of DVD Lid Holder
Step 1 Remove 1 screw from the DVD lid holder.
Step 2 Remove the DVD lid holder.
Caution Note: Keep the DVD lid holder in safe place. Avoid
denting it. Place it back during assembling.
denting it. Place it back during assembling.
Step 3 Open the DVD lid in the direction of arrow (1), until it is
aligned parrallel with the front panel.
aligned parrallel with the front panel.
Step 4 Lift the door spring in the direction of arrow (2).
Step 5 Move the shaft of the DVD lid in the direction of arrow
(3).
(3).
Step 6 Remove the DVD lid in the direction of arrow (4).
9.12. Disassembly of Ipod Cradle
Unit
•
•
•
•
Follow (Step 1) to (Step 3) of Item 9.3.
•
•
•
•
Follow (Step 1) to (Step 8) of Item 9.7.
•
•
•
•
Disassembly of Cradle Spring Plate
Step 1 Remove 1 screw from the cradle spring plate.
Step 2 Remove the cradle spring plate.
Caution Note: Keep the cradle spring plate in safe place for
assembling.
assembling.
Step 3 Align the Ipod cradle unit the shaft at each side is
completely seen.
completely seen.
Step 4 Release the shaft at each side from the catches.
Step 5 Remove the Ipod cradle unit in the direction of arrow.
45
SA-PT460EB / SA-PT460EG
9.13. Disassembly of Ipod Cradle
P.C.B.
•
•
•
•
Follow (Step 1) to (Step 3) of Item 9.3.
•
•
•
•
Follow (Step 1) to (Step 8) of Item 9.7.
•
•
•
•
Follow (Step 1) to (Step 5) of Item 9.12.
Step 1 Peel off the portion of the pana badge (paste type).
Step 2 Remove the screw for cradle.
Caution Note: Keep the screw in safe place. Place it back
during assembling.
during assembling.
Step 3 Use a flat head screw driver to release the catches.
Step 4 Remove the Cradle Cover A in the direction of Arrows.
Step 5 Remove 2 screws on the Ipod Cradle P.C.B.
Step 6 Remove Ipod Cradle P.C.B.
9.14. Disassembly of AC Inlet P.C.B.
•
•
•
•
Follow (Step 1) to (Step 3) of Item 9.3.
•
•
•
•
Disassembly of AC Inlet Shield Plate Unit.
Step 1 Remove 1 screw at the rear panel.
46
SA-PT460EB / SA-PT460EG
Step 2 Remove 2 screws from the AC Inlet shield plate unit.
Step 3 Remove the AC Inlet shield plate unit.
Caution Note: Keep the AC Inlet shield plate unit in safe
place. Avoid denting it. Place it back during assembling.
place. Avoid denting it. Place it back during assembling.
Step 4 Remove the D-Amp P.C.B. bracket.
Step 5 Remove AC Inlet P.C.B.
Caution Note: Keep the D-Amp P.C.B. bracket in safe
place. Avoid denting it. Place it back during assembling.
place. Avoid denting it. Place it back during assembling.
Special Note: During reassembling procedures, ensure the
P.C.B. is seated properly at the locators.
P.C.B. is seated properly at the locators.
9.15. Disassembly of Main P.C.B.
•
•
•
•
Follow (Step 1) to (Step 3) of Item 9.3.
Step 1 Remove 2 screws at the rear panel.
Step 2 Remove 2 screws on Main P.C.B.
Step 3 Detach 17P FFC cable at the connector (CN2007) on
the Main P.C.B.
the Main P.C.B.
Step 4 Detach 4P FFC cable at the connector (CN2013) on the
Main P.C.B.
Main P.C.B.
Step 5 Detach 13P cable at the connector (CN2016) on the
Power Supply P.C.B.
Power Supply P.C.B.
Step 6 Detach 28P cable at the connector (CN6001) on the
Power Supply P.C.B.
Power Supply P.C.B.
47
SA-PT460EB / SA-PT460EG
Step 7 Detach Main P.C.B. from the rear panel.
Step 8 Turn over Main P.C.B. to detach 17P FFC cable at the
connector (CN2009) on the Main P.C.B.
connector (CN2009) on the Main P.C.B.
Step 9 Detach 50P FFC cable at the connector (CN2001) on
the Main P.C.B.
the Main P.C.B.
Step 10 Detach 22P FFC cable at the connector (CN2801) on
the Main P.C.B.
the Main P.C.B.
Step 11 Remove Main P.C.B.
Special Note: During reassembling procedures, ensure the
P.C.B. is seated properly at the locators.
P.C.B. is seated properly at the locators.
9.16. Disassembly of D-Amp P.C.B.
•
•
•
•
Follow (Step 1) to (Step 3) of Item 9.3.
•
•
•
•
Follow (Step 1) to (Step 4) of Item 9.14.
•
•
•
•
Follow (Step 1) to (Step 5) of Item 9.15.
Step 1 Move aside Main P.C.B. and position it according to the
diagram shown.
diagram shown.
Step 2 Remove 2 screws on D-Amp P.C.B.
Step 3 Detach 17P cable at the connector (CN5050) on D-Amp
P.C.B.
P.C.B.
Step 4 Detach 8P cable at the connector (CN5500) on D-Amp
P.C.B.
P.C.B.
Step 5 Twist the wire clamper to detach 3P cable at the
connector (CN5501) on D-Amp P.C.B.
connector (CN5501) on D-Amp P.C.B.
Step 6 Remove 2 screws at the rear panel.
Step 7 Release the tab of the rear panel in the direction of
arrow.
arrow.
Step 8 Remove D-Amp P.C.B.
48
SA-PT460EB / SA-PT460EG
Click on the first or last page to see other SA-PT460EB / SA-PT460EG service manuals if exist.