DOWNLOAD Panasonic SA-PT460EB / SA-PT460EG Service Manual ↓ Size: 9.21 MB | Pages: 127 in PDF or view online for FREE

Error 

Code

H01 Tray loading error

The tray opening and closing is abnormal. 

Press [     STOP] on main  

CLOSE and OPEN of the tray cannot be   

unit for next error.

carried out properly. Loading motor error,  

(OPEN time: OPEN

DV5 LSI IC (IC8001) error.

CLOSE         OPEN      

H01 at CLOSE: CLOSE     

OPEN         CLOSE H01)

H02 Spindle servo error

The spindle servo/motor is abnormal. The 

Press [     STOP] on main

FG pulse is abnormal. CLV servo error. 

unit for next error.

H03 Traverse servo error

The traverse is abnormal. (Traverse servo, 

Press [     STOP] on main

DV5 LSI IC (IC8001), TRV motor error.) 

unit for next error.

H04 Tracking servo error

Tracking coil NG (OPU unit abnormal),

Press [     STOP] on main

DV5 LSI IC (IC8001) error.

unit for next error.

H05 Seek time out error

It is not possible to access the disc. TOC

Press [     STOP] on main

cannot read. Abnormal disc etc. Pickup

unit for next error.

abnormal or disk is dirty. (TRV motor 

error, DV5 LSI IC (IC8001) error.) 

H07 Driver IC thermal shut

The spindle motor is abnormal. 

Press [     STOP] on main

down

(short between brushes)

unit for next error.

U11 Focus servo error

Focus coil, FE signal error. Disc may be 

Press [     STOP] on main

dirty.

unit for next error.

(Unfinalized DVD-R

is likely to become 

U11.)

Description of error

Automatic FL Display

Remarks

Diagnosis  Contents

33

Error 

Code

U702 HDMI/DVI I2C

The communication error of I2C when

Press [     STOP] on main

communication error

connecting it with HDMI/DVI. For

unit for next error.

instance, when EDID information to which

information on the TV set side has been  

described cannot be read, it is generated.  

U703 HDMI/DVI attestation

When attestation (HDCP) with the TV

Press [     STOP] on main

error

side fails when connecting it with  

unit for next error.

HDMI/DVI, it is generated.

U704 HDMI/DVI SRM

It is generated at the equipment to which

Press [     STOP] on main

Riborcerar

the TV set is Riborced when connecting it

unit for next error.

with HDMI/DVI.

U705 HDMI/DVI SRM disk

It is generated at the time of it is time

Press [     STOP] on main

falsification check 

when illegal the SRM data of the  

unit for next error.

error

reproducing disk (verify error), when  

connecting it with HDMI/DVI.

F740 HDMI device key

I2C error when writing HDMI Key device

Press [     STOP] on main

into transmitter. 

unit for next error.

F893 FLASH ROM IC data 

Firmware error, DV5.0 LSI IC (IC8651)

Press [     STOP] on main

falsification error

error.

unit for next error.

F894 EEPROM IC

When failing in the access to EEPROM 

Press [     STOP] on main

abnormality error

IC located in the DVD Module P.C.B. 

unit for next error.

(IC8611).

F895 Language area 

Firmware version agreement check for  

Press [     STOP] on main

abnormal

factory preset setting failure prevention. 

unit for next error.

F897 Initialization 

Incomplete initialization after writing of 

Press [     STOP] on main

error

new firmware (Factory preset setting  

unit for next error.

failure prevention)

F899 The communication

Unsuitable combination of number of  

Press [     STOP] on main

specification 

system com and panel com used.

unit for next error.

disagreement

(Frimware)

between 

micro-processor

Diagnosis Contents

Description of error

Automatic FL Display

Remarks

34

Error 

Code

F61

The abnormalities

In normal operation, when DCDET2 goes

Press [     STOP] on main

in an output or power

to "L" (Low) (Not during POWER OFF

unit for next error.

supply circuit of 

condition),  F61 appears on FLDisplay  

POWER AMP

for 1 second and PCONT goes to

 "L" (Low).This is due to speaker output

has DC voltage or fan is not working.

F76

Abnormality in the 

In normal operation when DCDET1 is

Press [     STOP] on main

output voltage of 

detected "L" (Low) for two consecutive 

unit for next error.

stabilized power 

times, F76 is displayed on FL for 

supply

1 second and after that PCONT will be  

turned to "L" (Low). This is due to any of 

the DC voltages (+9V, +7V, -7V, +5V, 

+5.3V etc.) C22 not available.

Diagnosis Contents

Description of error

Automatic FL Display

Remarks

Error 

Code

F650 USB device: Devices  

Devices other than the mass storage  

Press [     STOP] on main

other than mass 

class are connected.

unit for next error.

storage

F651 USB device: Non-Full

The device that the transfer rate did not

Press [     STOP] on main

Speed Device

correspond to Full Speed was 

unit for next error.

connected. 

F652 USB device: 

The device in the interface (subclass) 

Press [     STOP] on main

Interface NG

outside correspondence was connected.

unit for next error.

(correspondence interface)

001b: Reduced Block Commands (RBC)

010b: SFF-8020i. MMC-2 (ATAPI)

110b: SCSI transparent command set.

F655 USB device:  

The overcurrent of 500mA or more was  

Press [     STOP] on main

Overcurrent detection

detected in VDD USB, and the USB  

unit for next error.

device driver function was intercepted.  

(To intercept the current.)

Diagnosis Contents

Description of error

Automatic FL Display

Remarks

This function prevents discs from being lost when the unit is used for sales demonstrations by disabling the disc eject function.
"LOCKED" is displayed on the unit, and ordinary operation is disabled.

     • 

• 

• 

• 

 1. Select the DVD/CD function.

 2. At POWER ON condition, press and hold down the

button and the power button on the main unit for at least three

seconds. (The message, “LOCKED” appears when the function is activated.)

35

OPEN/CLOSE

button is invalid and the main unit displays “LOCKED” while the lock function mode is entered.

     • 

• 

• 

• 

 1. Select the DVD/CD function.

 2. At POWER ON condition, press and hold down the

button and the power button on the main unit for at least three

seconds. (The message, “LOCKED” appears when the function is activated.)

The following buttons are invalid and the main unit displays “LOCKED” while the lock function mode is entered.

Main unit

OPEN/CLOSE,

/-TUNE MODE/—FM MODE, SELECTOR,

/

/

,

/

/

Remote

controller unit

iPod/USB, FM/EXT-IN, NUMERIC KEYS 0~9,

,

,

,

,

,

,

, RETURN,

FUNCTIONS, FL DISPLAY/SLEEP, MUTING

The lock can be cancelled by the same procedure as used in setting. ("UNLOCKED" is displayed on cancellation. Disconnecting
the power cable from power outlet does not cancel the lock.)

     • 

• 

• 

• 

When the FLASH ROM IC or DVD Module P.C.B. is replaced, carry out the recovery processing to optimize the drive.

Playback the recovery disk to process the recovery automatically.

     • 

• 

• 

• 

Recovery disc (Product number: RFKZD03R005) [SPG]

     • 

• 

• 

• 

Performing recovery process

 1. Load the recovery disc RFKZD03R005 on to the player and run it.

 2. Recovery is performed automatically. When it is finished, a message appears on the screen.

 3. Remove the recovery disc.

 4. Turn off the power.

 5. Initialize the player.

     • 

• 

• 

• 

The firmware of the DVD player may be renewed to improve the quality including operability and playability to the substandard
discs.processing to optimize the drive.

The recovery disc has also firmware version-up.

     • 

• 

• 

• 

After version-up, recovery processing is executed automatically.

     • 

• 

• 

• 

Part number of the recovery disc for version-up will be noticed when it is supplied.

     • 

• 

• 

• 

Updating firmware

 1. Load the recovery disc on to the player and run it.

 2. Firmware version of the player is automatically checked. Appropriate message appears whenever necessary.

 3. Using remote controller´s cursor key, select whether version updating is to be done or not. (Selection of Yes/No)

 4. a. If Yes is selected, version updating is performed.

b. If No is selected, only recovery is performed.

 5. a. When updating is finished, remove the disc according to the message appearing on the screen.

b. Remove the disc according to the message appearing on the screen.

 6. Turn off the power.

If the AC power supply is shut out during version-up due to a power failure, the version-up is improperly carried out.

In such a case, replace the FLASH ROM IC and carry out the version-up again.

     • 

• 

• 

• 

When after replacing FLASH ROM IC or DVD Module P.C.B., FL displays error code “ DVD F897”. This means the unit is not
initialized properly and the following process needs to be carry out.

     • 

• 

• 

• 

Procedures:

 1. Press

on remote control while pressing “STOP” button on main unit. (To enter into initialization)

36