Panasonic SA-PM500EG / SA-PM500EF / SA-PM500EP / SC-PM500EP Service Manual ▷ View online
33
Step 3 : Release the iPod Cover Lid from the catch.
Step 4 : Remove the iPod Cover Lid.
Caution 1 : During assembling, ensure the iPod Cover Lid
is properly seated on the locators and slot into the hole of
the Top Cabinet Block.
Caution 2 : During assembling, ensure the iPod Cover Lid
is properly catch to the Top Cabinet Block and a “click”
sound will be heard when fully catched.
is properly seated on the locators and slot into the hole of
the Top Cabinet Block.
Caution 2 : During assembling, ensure the iPod Cover Lid
is properly catch to the Top Cabinet Block and a “click”
sound will be heard when fully catched.
Step 5 : Open the iPod Lid by pressing as arrow shown.
34
Step 6 : Release the Lid Spring as shown.
Step 7 : Remove the Lid Spring as shown.
Caution : Keep the Lid Spring in safe place and place them
back during assembling.
Caution : Keep the Lid Spring in safe place and place them
back during assembling.
Step 8 : Push the shaft (B) of the iPod Lid in the direction as
shown.
Caution : Do not exert strong force to the iPod lid during
disassembling.
shown.
Caution : Do not exert strong force to the iPod lid during
disassembling.
Step 9 : Lift up the iPod lid as shown.
35
Step 10 : Push the shaft (A) of the iPod Lid in the direction as
shown.
Caution : Do not exert strong force to the iPod lid during
disassembling.
shown.
Caution : Do not exert strong force to the iPod lid during
disassembling.
Step 11 : Lift up the iPod lid as shown.
Step 12 : Remove the iPod lid as shown.
36
8.8.
Disassembly of Front Panel
Block
Block
• Refer to “Disassembly of Top Cabinet Block”
Step 1 : Detach 14P FFC at the connector (CN6801) on the
Panel P.C.B..
Step 2 : Detach 5P wire at the connector (CN901) on the USB
P.C.B..
Panel P.C.B..
Step 2 : Detach 5P wire at the connector (CN901) on the USB
P.C.B..
Step 3 : Release both locators.
Step 4 : Release 3 catches from the bottom.
Step 5 : Remove Front Panel Block.
Caution 1 : Do not attempt to exert strong force when
detaching the Front Panel Block.
Caution 2 : During assembling, ensure the Front Panel
Block is fully catched onto rear cabinet block.
Step 4 : Release 3 catches from the bottom.
Step 5 : Remove Front Panel Block.
Caution 1 : Do not attempt to exert strong force when
detaching the Front Panel Block.
Caution 2 : During assembling, ensure the Front Panel
Block is fully catched onto rear cabinet block.
Click on the first or last page to see other SA-PM500EG / SA-PM500EF / SA-PM500EP / SC-PM500EP service manuals if exist.