Panasonic SA-PM500EG / SA-PM500EF / SA-PM500EP / SC-PM500EP Service Manual ▷ View online
25
7.3.8.
Region Check Table (For Tuner)
7.3.9.
Model setting
Region
Model
Series
Country
1
PM500
PC
Canada
2
PM500
Japan
Japan
3
PM500
EP
E. Europe, CIS
4
PM500
EG/EF
C.E.U, N.E.U, S.E.U France
5
PM500
DBEB
UK
6
PM500
GA/GT/PU
S.E. Asia, Taiwan, C.America, S.America, Argentina
7
PM500
GN
Oceania
Region No.
Function
Model
With iPod
With Shock Proof
S3
O
X
PM500
26
7.4.
Sales Demonstration Lock Function Mode
7.4.1.
Entering into sales Demo Mode
Here is the procedures to enter into Sales Demonstration Lock.
Step 1 : Turn on the unit.
Step 1 : Turn on the unit.
Step 2 : Select to any mode function, press and hold [
] key and follow by [
] key. It must be pressed within 0.5 sec.
Step 3 : The display will show upon entering into this mode.
Note :
button is invalid and the main unit displays “LOCKED” while the lock function mode is entered.
7.4.2.
Cancellation
Step 1 : To cancel only can be triggered in CD Mode and Volume 19.
Step 2 : Press and hold [
] key and follow by [
] key. It must be pressed within 0.5 sec.
Step 3 : The display will show after exit from this mode.
27
8 Disassembly and Assembly Instructions
Caution Note:
• This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo-
nents for the unit. (You may refer to the section of “Main components and P.C.B Locations” as described in the service
manual)
manual)
• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with
sharp edges.
• Avoid touching heatsinks due to its high temperature after prolong use. (See caution as described below)
• During disassembly and assembly, please ensure proper service tools, equipments or jigs is being used.
• During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the ser-
• During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the ser-
vice manual.
• Select items from the following indexes when disassembly or replacement are required.
• Disassembly of Top Cabinet Block
• Disassembly of Headphone P.C.B.
• Disassembly of iPhone P.C.B.
• Disassembly of iPod Lid
• Disassembly of Front Panel Block
• Disassembly of Panel P.C.B.
• Disassembly of USB P.C.B.
• Disassembly of Display Window Assembly
• Disassembly of CD Lid
• Replacement of SMPS Block
• Disassembly of SMPS P.C.B.
• Replacement of Diode (D702)
• Replacement of Transistor (Q701)
• Disassembly of Main P.C.B. Unit
• Disassembly of Main P.C.B.
• Disassembly of CD Mechanism Unit (BRS1C)
• Replacement of Traverse Unit
• Disassembly of Headphone P.C.B.
• Disassembly of iPhone P.C.B.
• Disassembly of iPod Lid
• Disassembly of Front Panel Block
• Disassembly of Panel P.C.B.
• Disassembly of USB P.C.B.
• Disassembly of Display Window Assembly
• Disassembly of CD Lid
• Replacement of SMPS Block
• Disassembly of SMPS P.C.B.
• Replacement of Diode (D702)
• Replacement of Transistor (Q701)
• Disassembly of Main P.C.B. Unit
• Disassembly of Main P.C.B.
• Disassembly of CD Mechanism Unit (BRS1C)
• Replacement of Traverse Unit
28
8.1.
Disassembly flow chart
The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the ser-
vicing.
To assemble the unit, reverse the steps shown in the chart below.
vicing.
To assemble the unit, reverse the steps shown in the chart below.
8.2.
Types of Screws
Click on the first or last page to see other SA-PM500EG / SA-PM500EF / SA-PM500EP / SC-PM500EP service manuals if exist.