Panasonic SA-NC9EB Service Manual ▷ View online
Step 8 Remove 2 screws.
Step 9 Remove 2 screws.
Step 1 Remove top holder.
Step 2 Detach the FFC cables at connectors (CN2036 &
CN2851) on Main P.C.B.
CN2851) on Main P.C.B.
Step 3 Detach cable at connector (CN2857) on Main P.C.B.
•
•
•
•
Replacement
of
voltage
regulator
transistors
(Q5111/Q5901/Q5902).
Step 10 Remove 1 screw .
Step 11 Remove transistor clip.
Step 12 Desolder & remove the component.
Repeat Step 10 to Step 12 for replacement of Q5901 & Q5902.
Step 4 Detach cable at connector (FP9001) on DVD Module
P.C.B.
P.C.B.
10.6. Disassembly of DVD Changer Unit (DL2SV), DVD Module P.C.B &
HDMI P.C.B
•
•
•
•
Follow the (Step 1) - (Step 5) of Item 10.4
•
•
•
•
Follow the (Step 1) - (Step 3) of Item 10.5
53
SA-NC9EB
Step 5 Remove 2 screws.
Step 6 Detach DVD Changer unit to remove it.
•
•
•
•
Disassembly of DVD Module P.C.B
Step 1 Remove 4 screws.
Step 2 Detach FFC cable at connector (FP8251) on DVD
Module P.C.B.
Module P.C.B.
Step 1 Detach FFC cables at connectors (CN2602, CN2861 &
CN2603) on Main P.C.B.
CN2603) on Main P.C.B.
Step 3 Flip the DVD Module P.C.B sidewards.
Step 4 Detach FFC cable at connector (FP8531) on DVD
Module P.C.B.
Module P.C.B.
Step 5 Remove the DVD Module P.C.B.
Caution:
Handle with care during the disassembling & assembling.
During assembling, ensure the FFC cable is attached properly
to the connector (FP8531).
to the connector (FP8531).
•
•
•
•
Disassembly of HDMI P.C.B
Step 6 Remove 1 screw.
Step 7 Release 3 catches.
Step 8 Flip the HDMI P.C.B over.
Step 9 Detach FFC cables at connectors (FP8531,
FP8251, & FP8101).
FP8251, & FP8101).
Step 10 Remove HDMI P.C.B.
10.7. Disassembly of Main P.C.B
•
•
•
•
Follow the (Step 1) - (Step 5) of Item 10.4
•
•
•
•
Follow the (Step 1) - (Step 7) of Item 10.5
54
SA-NC9EB
Step 2 Detach cable at connector (CN5910) on Transformer
P.C.B..
P.C.B..
Step 1 Detach FFC at connectors (CN2602, CN2603 &
CN2861) on Main P.C.B.
CN2861) on Main P.C.B.
Step 2 Detach cable at connector (CN5951) on Transformer
P.C.B.
P.C.B.
Step 3 Lift up and remove Main P.C.B.
Caution: Do not exert strong force during disassemble of Main
P.C.B.
P.C.B.
Step 3 Bent the front panel unit slightly forward as shown.
10.8. Disassembly of Front Panel
•
•
•
•
Follow the (Step 1) - (Step 5) of Item 10.4
•
•
•
•
Follow the (Step 1) - (Step 4) of Item 10.6
55
SA-NC9EB
Step 4 Release 2 claws.
Step 1 Detach cable at connector (CN5950).
Step 2 Remove 3 screws on Transformer Bracket.
Step 3 Remove 3 screws on Power P.C.B and 1 screw on
Step 5 Remove the front panel.
Note: Ensure 2 claws located at the bottom chassis is seated
into the 2 slots at bottom of front panel at 2 catches (one on
each side) of bottom chassis to be aligned to front panel’s slot.
Assembly is secured upon hearing clicking sound.
into the 2 slots at bottom of front panel at 2 catches (one on
each side) of bottom chassis to be aligned to front panel’s slot.
Assembly is secured upon hearing clicking sound.
Speaker P.C.B.
Step 4 Remove Power P.C.B.
10.9. Disassembly of Power P.C.B. & Speaker P.C.B.
•
•
•
•
Follow the (Step 1) - (Step 5) of Item 10.4
•
•
•
•
Follow the (Step 1) - (Step 3) of Item 10.5
•
•
•
•
Follow the (Step 1) - (Step 3) of Item 10.7
•
•
•
•
Follow the (Step 1) - (Step 4) of Item 10.8
10.10. Replacement for Power Amp IC
•
•
•
•
Follow the (Step 1) - (Step 2) of Item 10.4
•
•
•
•
Follow the (Step 1) - (Step 3) of Item 10.5
56
SA-NC9EB
Click on the first or last page to see other SA-NC9EB service manuals if exist.