Panasonic SA-NC9EB Service Manual ▷ View online
49
SA-NC9EB
10.2. Disassembly flow chart
The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the
servicing.
servicing.
To assemble the unit, reverse the steps shown in the chart as below.
50
SA-NC9EB
10.3. Main Parts Location
51
SA-NC9EB
Step 1 Remove 4 screws at each side.
Step 2 Remove 7 screws at rear panel.
Step 1 Remove top holder.
Step 2 Remove 4 screws.
Step 3 Remove rear panel cover.
Step 4 Remove 10 screws.
Step 3 Lift up both sides of the top cabinet.
Step 4 Push the top cabinet backwards to release the catches.
Step 5 Remove the top cabinet.
Step 5 Detach cable at connector (CN2810) on Main P.C.B.
Step 6 Detach cable at connector (CN5101) on Transformer
P.C.B.
P.C.B.
Step 7 Remove rear block.
•
•
•
•
Disassembly of Sub Heatsink P.C.B
10.4. Disassembly of Top Cabinet
10.5. Disassembly of Rear Block
•
•
•
•
Follow the (Step 1) - (Step 5) of Item 10.4
52
SA-NC9EB
Click on the first or last page to see other SA-NC9EB service manuals if exist.