Panasonic SA-NC6EB Service Manual ▷ View online
10.2. Disassembly flow chart
The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the
servicing.
To assemble the unit, reverse the steps shown in the chart as below.
servicing.
To assemble the unit, reverse the steps shown in the chart as below.
49
SA-NC6EB
10.3. Main Parts Location
50
SA-NC6EB
Step 1 Remove 4 screws at each side.
Step 2 Remove 7 screws at rear panel.
Step 2 Remove 7 screws at rear panel.
Step 1 Remove top holder.
Step 2 Remove 3 screws.
Step 3 Remove rear panel cover.
Step 2 Remove 3 screws.
Step 3 Remove rear panel cover.
Step 4 Remove 10 screws.
Step 3 Lift up both sides of the top cabinet.
Step 4 Push the top cabinet backwards to release the catches.
Step 5 Remove the top cabinet.
Step 5 Remove the top cabinet.
Step 5 Detach cable at connector (CN2810) on Main P.C.B.
Step 6 Detach cable at connector (CN5101) on Transformer
P.C.B.
Step 7 Remove rear block.
· Disassembly of Sub Heatsink P.C.B
Step 6 Detach cable at connector (CN5101) on Transformer
P.C.B.
Step 7 Remove rear block.
· Disassembly of Sub Heatsink P.C.B
10.4. Disassembly of Top Cabinet
10.5. Disassembly of Rear Block
· Follow the (Step 1) - (Step 5) of Item 10.4
51
SA-NC6EB
Step 8 Remove 2 screws.
Step 9 Remove Sub Heatsink P.C.B.
Step 1 Remove top holder.
Step 2 Detach the FFC cables at connectors (CN2036) on
Main P.C.B.
Step 3 Detach cable at connector (CN2857) on Main P.C.B.
Step 2 Detach the FFC cables at connectors (CN2036) on
Main P.C.B.
Step 3 Detach cable at connector (CN2857) on Main P.C.B.
Step 4 Detach cable at connector (FP9001) on DVD Module
P.C.B..
P.C.B..
· Replacement
of
voltage
regulator
transistors
(Q5111/Q5901/Q5902).
Step 10 Remove 1 screw .
Step 11 Remove transistor clip.
Step 12 Desolder & remove the component.
Repeat Step 10 to Step 12 for replacement of Q5901 & Q5902.
Repeat Step 10 to Step 12 for replacement of Q5901 & Q5902.
Step 5 Remove 2 screws.
Step 6 Detach DVD Changer unit to remove it.
· Disassembly of DVD Module P.C.B
Step 1 Remove 4 screws.
Step 6 Detach DVD Changer unit to remove it.
· Disassembly of DVD Module P.C.B
Step 1 Remove 4 screws.
10.6. Disassembly of DVD Changer Unit (DL2SV)
· Follow the (Step 1) - (Step 5) of Item 10.4
52
SA-NC6EB
Click on the first or last page to see other SA-NC6EB service manuals if exist.