Panasonic SA-HT540EE Service Manual ▷ View online
Be careful when disassembling and servicing.
Some chassis components may have sharp edges.
Some chassis components may have sharp edges.
Special Note:
9 Assembling and Disassembling
“ATTENTION SERVICER”
1. This section describes the disassembly procedures for all the major printed circuit boards and main components.
2. Before the disassembly process was carried out, do take special note that all safety precautions are to be carried out.
2. Before the disassembly process was carried out, do take special note that all safety precautions are to be carried out.
(Ensure that no AC power supply is connected during disassembling.)
3. For assembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
4. The Switch Regulator IC may have high temperature after prolonged use.
Use caution when removing the top cabinet and avoid touching heat sinks located in the unit.
5. Select items from the following index when checks or replacement are required.
· Disassembly of Top Cabinet
· Disassembly of DVD Lid (When taking out disc manually)
· Disassembly of Front Panel
· Disassembly of Music Port P.C.B., Mic P.C.B., FL P.C.B. & Top Button P.C.B.
· Disassembly of Mechanism Unit
· Disassembly of DVD Module P.C.B.
· Disassembly of Rear panel
· Disassembly of Scart P.C.B.
· Disassembly of Main P.C.B., AC-Inlet P.C.B. & Tuner Extent P.C.B.
· Disassembly of Digital Amp IC (IC5000/IC5200/IC5300)
· Disassembly of Digital Amp IC(IC5400)
· Disassembly of Regulator IC
· Disassembly of Switch Regulator IC(IC5701)
· Disassembly of DVD Lid (When taking out disc manually)
· Disassembly of Front Panel
· Disassembly of Music Port P.C.B., Mic P.C.B., FL P.C.B. & Top Button P.C.B.
· Disassembly of Mechanism Unit
· Disassembly of DVD Module P.C.B.
· Disassembly of Rear panel
· Disassembly of Scart P.C.B.
· Disassembly of Main P.C.B., AC-Inlet P.C.B. & Tuner Extent P.C.B.
· Disassembly of Digital Amp IC (IC5000/IC5200/IC5300)
· Disassembly of Digital Amp IC(IC5400)
· Disassembly of Regulator IC
· Disassembly of Switch Regulator IC(IC5701)
29
SA-HT540EE
9.1. Disassembly Flow Chart
30
SA-HT540EE
9.2. Main Components and P.C.B. Locations
31
SA-HT540EE
9.3. Disassembly of Top Cabinet
Step 1 Remove 4 screws.
Step 2 Remove 3 screws. (Rear view)
Step 3 Lift up and remove the top cabinet.
Step 3 Lift up and remove the top cabinet.
9.4. Disassembly of the DVD Lid
(When taking out disc
manually)
manually)
Step 1 Detach the gear for drawing out tray from the
mechanism unit. It inserts a screw driver in the gear. (The gear
jig)
Step 2 Insert the gear jig into the tray open/ close hole.
Step 3 Turn the gear jig counterclockwise to open the tray.
Note : Do not use force to push the tray backwards as it can
damage the mechanism unit.
Step 4 Turn the gear jig clockwise to return tray.
Step 5 Release the tabs and remove DVD lid.
mechanism unit. It inserts a screw driver in the gear. (The gear
jig)
Step 2 Insert the gear jig into the tray open/ close hole.
Step 3 Turn the gear jig counterclockwise to open the tray.
Note : Do not use force to push the tray backwards as it can
damage the mechanism unit.
Step 4 Turn the gear jig clockwise to return tray.
Step 5 Release the tabs and remove DVD lid.
32
SA-HT540EE
Click on the first or last page to see other SA-HT540EE service manuals if exist.