Panasonic SA-BX500EB / SA-BX500EE / SA-BX500EG Service Manual ▷ View online
Step 12 Position D-Port P.C.B. as Diagram shown.
Step 13 Connect 22P FFC Cable at the connector (CN6301)
on Wireless Adapter P.C.B..
on Wireless Adapter P.C.B..
Step 14 Connect 11P FFC cable at the connector (PB4401) on
Digital P.C.B.
Digital P.C.B.
Step 15 Proceed to check D-Port, Wireless Adapter and Digital
P.C.B.
P.C.B.
7.19. Disassembly and Checking of
Main (Side A/B) P.C.B.
•
•
•
•
Follow (Step 1) to (Step 4) of Item 7.3.
•
•
•
•
Follow (Step 1) to (Step 3) of Item 7.5.
•
•
•
•
Disassembly and Checking Side A.
Step 1 Remove 9 screws.
Step 2 Release 2 tabs.
Step 3 Remove rear panel as arrow shown.
Step 4 Position the P.C.B as diagram show.
Step 5 Connect Wireless Adapter, Digital & D-Port P.C.B..
Step 6 Proceed to check Side A of Main P.C.B.
•
•
•
•
Disassembly and Checking Side B.
Step 7 Remove 4 screws.
Step 8 Remove Main P.C.B. support.
Step 9 Flip the Main P.C.B. as arrow shown.
45
SA-BX500EB / SA-BX500EE / SA-BX500EG
Step 10 Proceed to check Side B of Main P.C.B.
7.20. Disassembly of Front Panel
•
•
•
•
Follow (Step 1) to (Step 4) of Item 7.3.
Step 1 Remove 2 screws.
Step 2 Release 1 catch.
Step 3 Detach 30P FFC cable at the connector (PB501) on
Main P.C.B..
Main P.C.B..
Step 4 Detach 7P cable at the connector (PB502) on Main
P.C.B.
P.C.B.
Step 5 Detach 5P cable at the connector (PB1002) on Main
P.C.B.
P.C.B.
Step 6 Detach 3P cable at the connector (PA1051) on Main
P.C.B.
P.C.B.
Step 7 Detach 2P cable at the connector (PA1002) on Main
P.C.B.
P.C.B.
46
SA-BX500EB / SA-BX500EE / SA-BX500EG
Step 8 Remove 4 screws.
Step 9 Slightly move up 2 support bars and DSP P.C.B. to
release the catches.
release the catches.
Step 10 Release 2 tabs.
Step 11 Remove front panel as arrow shown.
7.21. Disassembly and checking of
Panel, Headphone, Volume
P.C.B.
P.C.B.
•
•
•
•
Follow (Step 1) to (Step 4) of Item 7.3.
•
•
•
•
Follow (Step 1) to (Step 11) of Item 7.15.
Step 1 Remove Selector and Volume Knob.
Step 2 Remove 2 M9 nuts (i), (ii) by using plyer as diagram
shown.
shown.
Step 3 Remove 6 screws at front panel shield plate.
Step 4 Remove the front panel shield plate.
Step 5 Remove 9 screws.
Step 6 Remove 2 VCR earth angles.
Step 7 Remove Panel, Volume, Headphone P.C.B.
Caution : Keep the Panel Earth Plate in safe place. Avoid
denting it. Place it back during assembling.
denting it. Place it back during assembling.
47
SA-BX500EB / SA-BX500EE / SA-BX500EG
Caution: Keep the VCR Earth Angle in safe place. Avoid
denting it. Place it back during assembling.
denting it. Place it back during assembling.
Step 8 Connect Panel, Volume, Headphone P.C.B.
Step 9 Proceed to check Panel, Volume, Headphone P.C.B.
48
SA-BX500EB / SA-BX500EE / SA-BX500EG
Click on the first or last page to see other SA-BX500EB / SA-BX500EE / SA-BX500EG service manuals if exist.