Panasonic SA-BTT770EG / SA-BTT770EP / SA-BTT775EB / SA-BTT775EE / SA-BTT775GN / SC-BTT775EEK Service Manual ▷ View online
37
6 Operating Instructions
6.1.
Removing of disc during abnormality
6.1.1.
Using main unit key buttons.
6.1.1.1.
When the power can be turned off.
1. Turn off the power and press & hold [OK] button on main unit, and [B] & [Y] button on remote for 5 seconds.
6.1.1.2.
When the power cannot be turned off.
1. Press & hold the [POWER] button to turn off the power forcibly, then press & hold [SKIP FWD] button on remote and [OPEN/
CLOSE] button on main unit for 5 seconds.
6.1.2.
When the Forcible Disc Eject cannot be done.
1. Turn off the power and remove AC Cord.
2. Insert Paper Clip into the hole on the bottom of unit and slide the Paper Clip on the direction of the arrow to eject tray slightly.
2. Insert Paper Clip into the hole on the bottom of unit and slide the Paper Clip on the direction of the arrow to eject tray slightly.
The tray will open automatically.
38
3. Gently pull out the tray.
4. Remove disc.
4. Remove disc.
39
7 Self-Diagnostic and Special Mode Setting
7.1.
Special Mode Setting
7.1.1.
Special Mode Table 1
7.3
SERV
40
7.1.2.
Special Mode Table 2
Demonstration
lock/unlock
lock/unlock
Ejection of the disc is prohibited.
The lock setting is effective until unlocking the
tray and not released by Main unit
initialization of service mode.
The lock setting is effective until unlocking the
tray and not released by Main unit
initialization of service mode.
*When lock the tray.
“LOCK” is displayed for 3 seconds.
When the power is on (SS mode),
press [PLAY] and [OPEN/CLOSE]
keys simultaneously for 5 seconds.
press [PLAY] and [OPEN/CLOSE]
keys simultaneously for 5 seconds.
Note:
When a disc is not in tray, this
setting is not effective.
setting is not effective.
*When unlock the tray.
“UNLOCK” is displayed for 3 sec-
onds.
onds.
When the power is on (SS mode),
press [PLAY] and [OPEN/CLOSE]
keys simultaneously for 5 seconds.
press [PLAY] and [OPEN/CLOSE]
keys simultaneously for 5 seconds.
*When press [OPEN/CLOSE] key
while the tray being locked.
while the tray being locked.
Display ”LOCK” for 3 seconds.
Press [OPEN/CLOSE] key while the
tray is being locked.
tray is being locked.
Default setting
The date of Menu, Mode and EEPROM
setting, etc. is set to the default condition in
factory.
setting, etc. is set to the default condition in
factory.
“HELLO” is displayed 10 seconds.
While the unit is off, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
Repeatedly press
[
]
on the
remote control or [POWER] on the
unit until "08 FIN" is displayed on
the unit's display.
unit until "08 FIN" is displayed on
the unit's display.
Press and hold [OK] on the
remote control or [OPEN/CLOSE]
on the unit for at least 3 seconds.
on the unit for at least 3 seconds.
Item
FL display
Key operation
Mode name
Description
Front Key
Click on the first or last page to see other SA-BTT770EG / SA-BTT770EP / SA-BTT775EB / SA-BTT775EE / SA-BTT775GN / SC-BTT775EEK service manuals if exist.