Panasonic SA-BFT800EE / SA-BFT800EEK Service Manual ▷ View online
49
10.2. Main Components and P.C.B. Locations
50
10.3. Disassembly of Door Assembly
Step 1 Upset the main unit as diagram shown.
Step 2 Insert a small flathead screw driver into the hole behind
the Door Assembly.
Step 3 Push the cam gear from point A to B.
Note: The cam gear will be disengage after pushing.
Step 2 Insert a small flathead screw driver into the hole behind
the Door Assembly.
Step 3 Push the cam gear from point A to B.
Note: The cam gear will be disengage after pushing.
Step 4 Gently push the Door Assembly manually until it is fully
extended.
extended.
Step 5 Lift up the Door Assembly slightly as arrow (1) shown.
Step 6 Push the Door Assembly as arrow (2) shown.
Step 7 Remove the Door Assembly.
Step 6 Push the Door Assembly as arrow (2) shown.
Step 7 Remove the Door Assembly.
Caution: During assembling/ disassembling, avoid touch-
ing the Lens.
ing the Lens.
• Assembly of Door Assembly.
Step 1 Turn the gear fixture as diagram shown.
Step 2 Align the Door Assembly with the (upper & lower rib),
guide reel (A & B) on the front panel.
Step 3 Slide Door Assembly until in the direction of arrow it is
fully closed.
guide reel (A & B) on the front panel.
Step 3 Slide Door Assembly until in the direction of arrow it is
fully closed.
51
Caution: Avoid using strong force, ensure the Door
Assembly move smoothly. Repeat steps if there is problem
in the assembling.
Assembly move smoothly. Repeat steps if there is problem
in the assembling.
52
10.4. Disassembly of Back Cabinet Assembly
Step 1 Remove 3 screws.
Step 2 Remove Stand Assembly.
Step 2 Remove Stand Assembly.
Step 3 Remove 6 Screw Covers at both sides of Back Cabinet Assembly.
Click on the first or last page to see other SA-BFT800EE / SA-BFT800EEK service manuals if exist.