Panasonic SA-BFT800EE / SA-BFT800EEK Service Manual ▷ View online
33
7.1.2.
Error Code Table 2
7.1.3.
Power Supply & Digital Amplifier Error Code Table
SELF
CHECK
CHECK
Restoration operation
Since the power cord fell out during a power
failure or operation, it is under restoration
operation.
*It will OK, if a display disappears automati-
cally. If a display does not disappear, there is
the possibility that defective Digital P.C.B. /
DVD drive.
failure or operation, it is under restoration
operation.
*It will OK, if a display disappears automati-
cally. If a display does not disappear, there is
the possibility that defective Digital P.C.B. /
DVD drive.
No display
PLEASE
WAIT
WAIT
Unit is in termination process
Unit is in termination process now.
BYE
is displayed and power will be turned off.
No display
UNFOR-
MAT
MAT
Unformatted disc error
You have inserted an unformatted DVD-RAM
or DVD-RW that is unformatted or recorded
on other equipment.
or DVD-RW that is unformatted or recorded
on other equipment.
The disc is not
formatted properly.
formatted properly.
No PLAY
When there is a viewing restric-
tion on a BD-Video or DVD-
Video.
tion on a BD-Video or DVD-
Video.
Rating password is set.
No display
Error Code
Diagnosis contents
Description
Monitor Display
Automatic FL display
SELF CHECK
PLEASE WAIT
UNFORMAT
No PLAY
The character indication flows
sideways.
sideways.
Error
Code
F61
The abnormalities
In normal operation, when DCDET2 goes
Press [ STOP] on main
in an output or power
to "L" (Low) (Not during POWER OFF
unit for next error.
supply circuit of
condition), F61 appears on FLDisplay
POWER AMP
for 1 second and PCONT goes to
"L" (Low).This is due to speaker output
has DC voltage or fan is not working.
F76
F76
H19
Abnormality in the
Fan Module
In normal operation when DCDET1 is
Fan Module is not operating properly
Press [ STOP] on main
output voltage of
detected "L" (Low) for two consecutive
unit for next error.
stabilized power
times, F76 is displayed on FL for
supply
1 second and after that PCONT will be
turned to "L" (Low). This is due to any of
the DC voltages (+9V, +7V, -7V, +5V,
+5.3V etc.) C22 not available.
Diagnosis Contents
Description of error
Automatic FL Display
Remarks
Press [ STOP] on main
unit for next error.
34
7.2.
Special Mode Setting
7.2.1.
Special Mode Table 1
Item
FL display
Key operation
Mode name
Description
Front Key
Initialize Mode
*A
1) Unit power-up
2) FL shows "HELLO" follow by "bye"
3) Unplug & plug AC Cord
1) Unit power-up
2) FL shows "HELLO" follow by "bye"
3) Unplug & plug AC Cord
ll the main unit’s parameters are initialized.
Rating password
The audiovisual level setting password is ini-
tialized to
tialized to
Level 8
.
Service Mode
Setting every kind of modes for servicing.
*Details are described in
*Details are described in
7.3.1. Service Mode
at a glance
.
BD-ROM history cleaning < Persistent Storage> of BD-ROM standard is
cleaned.
Screen display: [The player’s history data has
been cleared] is displayed for five seconds.
Screen display: [The player’s history data has
been cleared] is displayed for five seconds.
Same display as before execution.
When power on, press [STOP] on
main unit & [POWER] on main unit.
main unit & [POWER] on main unit.
During power off, press [SKIP
FWD] on remote control & [DISC ]
keys on main unit simultaneously
for 5 seconds or more.
FWD] on remote control & [DISC ]
keys on main unit simultaneously
for 5 seconds or more.
Forced disc eject
Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
The tray will open and unit will shift to P-off
mode.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
The display before execution
leaves.
leaves.
Forced power-off
When the power button is not effective while
power is ON, turn off the power forcibly.
power is ON, turn off the power forcibly.
Display in P-off mode.
Press [POWER] key over than 10
seconds.
seconds.
Aging
Perform sequence of modes as * Aging
Description shown below continually.
Description shown below continually.
Display
following
the
mode.
When the power is ON, press
5
seconds and less than 10 seconds.
NOTE1:
If Unit has not turned into Aging
mode by operations shown above,
execute TEST MODE once and re-
execute operation shown above.
(*All the main unit s parameters
include tuner are initialized by TEST
mode.)
mode by operations shown above,
execute TEST MODE once and re-
execute operation shown above.
(*All the main unit s parameters
include tuner are initialized by TEST
mode.)
NOTE2:
If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and re-exe-
cute this command.
*When releasing Aging mode, press
[POWER] key over 10 seconds.
pressing keys for over 10 seconds,
once turn off the power, and re-exe-
cute this command.
*When releasing Aging mode, press
[POWER] key over 10 seconds.
INIT
INIT
SERV
******
******
******
[SKIP FW], [PLAY] & [OPEN/
CLOSE] simultaneously for over
CLOSE] simultaneously for over
During power On, press [SKIP
REV] on remote control, follow
by [PLAY] on main unit simultane-
ously for 5 seconds.
REV] on remote control, follow
by [PLAY] on main unit simultane-
ously for 5 seconds.
During power off, press &
hold [Vol +] & [DISC ],
follow by [POWER] button on
main unit simultaneously for 5
seconds or more.
hold [Vol +] & [DISC ],
follow by [POWER] button on
main unit simultaneously for 5
seconds or more.
During power off, press &
hold [Vol +] & [DISC ],
follow by [POWER] button on
main unit simultaneously for 5
seconds or more.
hold [Vol +] & [DISC ],
follow by [POWER] button on
main unit simultaneously for 5
seconds or more.
35
7.2.2.
Special Mode Table 2
Demonstration lock/
unlock
unlock
Ejection of the disc is prohibited.
The lock setting is effective until unlocking the
tray and not released by
The lock setting is effective until unlocking the
tray and not released by
Main unit
initialization
of service mode.
*When lock the tray.
LOCK
is displayed for 3 seconds.
Note:
When a disc is not in tray, this
setting is not effective.
setting is not effective.
*When unlock the tray.
UNLOCK
is displayed for 3 sec-
onds.
*When press OPEN/CLOSE key
while the tray being locked.
*When press OPEN/CLOSE key
while the tray being locked.
Display
LOCK
for 3 seconds.
Press [OPEN/CLOSE] key while the
tray is being locked.
tray is being locked.
Progressive initialization
The progressive setting is initialized to Inter-
lace.
lace.
The display before execution
leaves.
leaves.
When the power is on (SS mode),
press [STOP] and [PLAY] simulta-
neously for 5 seconds.
press [STOP] and [PLAY] simulta-
neously for 5 seconds.
Item
FL display
Key operation
Mode name
Description
Front Key
When the power is on, press
[PLAY] and [DISC ] keys
simultaneously for 5 seconds.
[PLAY] and [DISC ] keys
simultaneously for 5 seconds.
When the power is on, press
[PLAY] and [DISC ] keys
simultaneously for 5 seconds.
[PLAY] and [DISC ] keys
simultaneously for 5 seconds.
When the power is on, press &
hold [SKIP REV] & [POWER]
on main unit.
hold [SKIP REV] & [POWER]
on main unit.
During power-on, press & hold
[SKIP REV] on remote control.
Follow by [POWER] button on
main unit.
[SKIP REV] on remote control.
Follow by [POWER] button on
main unit.
Once release buttons, will exit
this mode.
this mode.
FL Display
(i)
(ii)
(v)
(iv)
M-XXXX
S-YYYY
AA/BB/CC
DDDDDD
Sub Firmware Version
DSP Firmware Version
Model No.
(iii)
D-ZZZZ
Date
Main Firmware Version
Firmware version check To check for main and sub firmware,
model code.
36
7.3.
Service Mode at glance
Service mode setting: During standby mode, press & hold [VOL +] & [DISC ], follow by [POWER] button on main unit simulta-
neously for 5 seconds or more.
neously for 5 seconds or more.
7.3.1.
Service Mode Table 1
Item
FL display
Key operation
Mode name
Description
(Remote controller key)
Release Items
Item of Service Mode executing is cancelled.
Press [0] [0] or [Return] in service
mode.
mode.
Error Code Display
Last Error Code of U/H/F held by Timer is dis-
played on FL.
*Details are described in
played on FL.
*Details are described in
7.1.1. Self-Diagno-
sis Functions.
If any error history does not exist,
[F00] is displayed.
[F00] is displayed.
Press [0] [1] in service mode
ROM Version Display
1. Region code (displayed for 5 sec.)
2. Main firm version (displayed for 5 sec.)
3. Timer firm version (displayed for 5 sec.)
4. Drive firm version (displayed for 5 sec.)
5. ROM correction version (left displayed)
2. Main firm version (displayed for 5 sec.)
3. Timer firm version (displayed for 5 sec.)
4. Drive firm version (displayed for 5 sec.)
5. ROM correction version (left displayed)
*
are version displays.
Press [0] [2] in service mode
Drive check
Simple quality of BD Traverse
*If the date of the present or the
trouble occurred time is incorrect, it
may be not able to judge correctly.
trouble occurred time is incorrect, it
may be not able to judge correctly.
Press [3] [8] in service mode.
SERV
When BD Traverse is OK
When BD Traverse is NG
Click on the first or last page to see other SA-BFT800EE / SA-BFT800EEK service manuals if exist.