Panasonic SA-BFT800EE / SA-BFT800EEK Service Manual ▷ View online
29
5.11.1.
File Folders Structures
30
6 Operating Instructions
6.1.
Door Assembly Unit Jam
6.1.1.
Removing the disc
Step 1 Insert a flathead screwdriver into the hole behind the
Door Assembly and push the cam gear from point A to B.
Door Assembly and push the cam gear from point A to B.
Step 2 Push the Door Assembly as arrow shown until the disc
is fully in sight.
Step 3 Remove the disc.
is fully in sight.
Step 3 Remove the disc.
6.1.2.
Removing the iPod
Step 1 Insert a flathead screwdriver into the hole behind the
Door Assembly and push the cam gear from point B to A.
Door Assembly and push the cam gear from point B to A.
Step 2 Push the Door Assembly as arrow shown until the iPod
is fully in sight.
Step 3 Remove the iPod.
is fully in sight.
Step 3 Remove the iPod.
31
7 Self-Diagnostic and Special Mode Setting
7.1.
Service Mode Summary Table
Self-Diagnosis Function provides information for error to service personnel by Self-Diagnosis Display when any error has occurred.
U**, H** and F** are stored in my memory and held.
U**, H** and F** are stored in my memory and held.
• You can check latest error code by transmitting [0] [1] of Remote Control in Service Mode.
Automatic Display on FL will be cancelled when the power is turned off or AC input is turned off during self-diagnosis display is
ON.
ON.
32
7.1.1.
Error Code Table 1
Error Code
Diagnosis contents
Description
Monitor Display
Automatic FL display
U30
Remote control code error
Display appears when main unit and remote
controller codes are not matched.
controller codes are not matched.
No display
*
is remote controller code of the
main unit.
Display for 5 seconds.
Display for 5 seconds.
U59
Abnormal inner temperature
detected
detected
Display appears when the drive temperature
exceeds 70 C.
The power is turned off forcibly.
For 30 minutes after this, all key entries are
disabled. (Fan motor operates at the highest
speed for the first 5 minutes. For the remain-
ing 25 minutes, fan motor is also stopped.)
The event is saved in memory as well.
exceeds 70 C.
The power is turned off forcibly.
For 30 minutes after this, all key entries are
disabled. (Fan motor operates at the highest
speed for the first 5 minutes. For the remain-
ing 25 minutes, fan motor is also stopped.)
The event is saved in memory as well.
No display
U59
is displayed for 30 minutes.
U71
HDMI incompatible error
(HDCP incompatible)
(HDCP incompatible)
Display this error when the equipment (com-
patible with DVI such as TV, amplifier etc.)
connected to the unit by HDMI is incompatible
with HDCP.
*HDCP=High-bandwidth Digital Content Pro-
tection
patible with DVI such as TV, amplifier etc.)
connected to the unit by HDMI is incompatible
with HDCP.
*HDCP=High-bandwidth Digital Content Pro-
tection
No display
U72
HDMI connection error
(communication error)
(communication error)
This error is displayed when there are any
communication problems with the unit and the
equipments (TV, amplifier etc.) connected to
the unit by HDMI. (or when there is a problem
with the HDMI cable)
communication problems with the unit and the
equipments (TV, amplifier etc.) connected to
the unit by HDMI. (or when there is a problem
with the HDMI cable)
No display
U72 display disappears when
error has been solved by Power
OFF/ON of connecting equipment
or by inserting/removing of HDMI
cable.
error has been solved by Power
OFF/ON of connecting equipment
or by inserting/removing of HDMI
cable.
U73
HDMI connection error
(authentication error)
(authentication error)
when authentication error occurs while the
equipments (TV, amplifier etc.) are connected
by HDMI. (or when there is a problem with the
HDMI cable)
equipments (TV, amplifier etc.) are connected
by HDMI. (or when there is a problem with the
HDMI cable)
No display
U73 display disappears when
error has been solved by Power
OFF/ON of connecting equipment
or by inserting/removing of HDMI
cable.
error has been solved by Power
OFF/ON of connecting equipment
or by inserting/removing of HDMI
cable.
F99
Hang-up
Displayed when communication error has
occurred between Main microprocessor
occurred between Main microprocessor
and Timer microprocessor (IC7501).
No display
Displayed is left until the [POWER]
key is pressed.
key is pressed.
H19
Inoperative fan motor
When inoperative fan motor is detected after
powered on, the power is turned off
automatically.
The event is saved in memory.
powered on, the power is turned off
automatically.
The event is saved in memory.
No display
No display
F00
No error information
Initial setting for error code in memory
(Error code Initialization is possible with error
code initialization and main unit initialization.)
(Error code Initialization is possible with error
code initialization and main unit initialization.)
No display
No display
F34
Initialization error when main
microprocessor is started up
for program recording
microprocessor is started up
for program recording
When initialization error is detected after
starting up main microprocessor
starting up main microprocessor
power
turned
automatically.
The event is saved in memory.
No display
No display
F58
Drive hardware error
When drive unit error is detected, the event is
saved in memory.
saved in memory.
No display
No display
UNSUP-
PORT
PORT
Unsupported disc error
*An unsupported format disc was played,
although the drive starts normally.
*The data format is not supported, although
the media type is supported.
*Exceptionally in case of the disc is dirty.
although the drive starts normally.
*The data format is not supported, although
the media type is supported.
*Exceptionally in case of the disc is dirty.
This disc is
incompatible.
incompatible.
NO READ Disc read error
*A disc is flawed or dirty.
*A poor quality failed to start.
*The track information could not be read.
*A poor quality failed to start.
*The track information could not be read.
Cannot rea d.
Please check the
disc.
Please check the
disc.
HARD
ERR
ERR
Drive error
The drive detected a hard error.
DVD drive error.
Display for 5 seconds.
the
is
off
UNSUPPORT
HARD ERR
The character indication flows
sideways.
sideways.
F99
U73
NOREAD
U71
U72
U59
SET
*
Click on the first or last page to see other SA-BFT800EE / SA-BFT800EEK service manuals if exist.