Panasonic DLS6C Service Manual ▷ View online
8.5.6. Assembly of traverse unit
Caution:
" Do ensure that the traverse unit is in the conditiion to be
assembled, please refer to section 8.3.1.
" Removal of the short pin is necessary for replacement
of new traverse unit.
Step 1: Release the guide.
Step 2: Push the traverse slide plate (rib), ensure both grooves
are opened.
Step 2: Push the traverse slide plate (rib), ensure both grooves
are opened.
29
DLS6C
Step 3: Slot the traverse unit at approximately 45° into the
mecha chassis as arrow shown.
Note: Ensure the bosses fix exactly onto the guides.
mecha chassis as arrow shown.
Note: Ensure the bosses fix exactly onto the guides.
Step 4: Release the guide.
Step 5: Push the traverse slide plate (rib) to lock the traverse
unit in.
Step 5: Push the traverse slide plate (rib) to lock the traverse
unit in.
30
DLS6C
9 Disassembly Flow
31
DLS6C
10 DLS6C Mechanism Reliability
Purpose: To test the DLS6C mechanism unit operation by using the Reliability P.C.B. before installation into the main unit.
10.1. Setup Connection
Below diagram shows the set-up necessary to carry out the reliability of mechanism.
Equipments required for the set up preparation:
- Power supply
- Reliability P.C.B. (RFKZCR14)
- Power supply
- Reliability P.C.B. (RFKZCR14)
32
DLS6C
Click on the first or last page to see other DLS6C service manuals if exist.